v4l2 support not working
Brought to you by:
slovin
Menu
▾
▴
It means it cannot fine indi_v4l2_ccd driver on your system. run:
$ which indi_v4l2_ccd
What do you get? Are you sure INDI binaries are installed to /usr/bin ?
Thanks.
1 I knew that. I'm a software engineer but new to Linux/Indi.
2 Nothing
3 Thanks for telling me where to look, I found indi_v4l_philips :-)
I shall inform the people who gave me the wrong driver name.
But indi should not have looped so there is still something to fix.
Thanks again.
Peter
To: 53@bugs.indi.p.re.sf.net
From: slovin@users.sf.net
Subject: [indi:bugs] #53 v4l2 support not working
Date: Sat, 7 Jun 2014 21:11:22 +0000
It means it cannot fine indi_v4l2_ccd driver on your system. run:
$ which indi_v4l2_ccd
What do you get? Are you sure INDI binaries are installed to /usr/bin ?
[bugs:#53] v4l2 support not working
Status: open
Group: 0.9.X
Created: Thu Jun 05, 2014 08:42 PM UTC by Peter Madelaine
Last Updated: Thu Jun 05, 2014 08:42 PM UTC
Owner: nobody
The following command causes a loop:
indiserver -v indi_v4l2_ccd
it spins too fast to read but before I become cross-eyed I can pick out "no such driver"
An awful lot of folk in UK have the Philips SPC900 webcam which requires this to work.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/indi/bugs/53/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Related
Bugs:
#53indi_v4l2_ccd is the correct driver name, you just don't have it installed. Please make sure INDI library is properly installed on your system.
indi_v4l2_ccd is installed, but having a Philips SPC900 I thought the _philips was the one to use. When I get a moment I'll experiment with both.
Regards
Peter
To: 53@bugs.indi.p.re.sf.net
From: slovin@users.sf.net
Subject: [indi:bugs] #53 v4l2 support not working
Date: Mon, 9 Jun 2014 09:45:00 +0000
indi_v4l2_ccd is the correct driver name, you just don't have it installed. Please make sure INDI library is properly installed on your system.
[bugs:#53] v4l2 support not working
Status: open
Group: 0.9.X
Created: Thu Jun 05, 2014 08:42 PM UTC by Peter Madelaine
Last Updated: Sat Jun 07, 2014 09:11 PM UTC
Owner: nobody
The following command causes a loop:
indiserver -v indi_v4l2_ccd
it spins too fast to read but before I become cross-eyed I can pick out "no such driver"
An awful lot of folk in UK have the Philips SPC900 webcam which requires this to work.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/indi/bugs/53/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Related
Bugs:
#53