Open Source C Computer-Aided Manufacturing (CAM) Software for Windows

Create 3D models easily in Win95,NT,XP,Vista,Win7 on all desktops, laptops and even netbooks without any 3D hardware acceleration. Supports 3DS, DXF, WRL, POV, ASC, spreadsheet & compressed files, extrude/sweep, mesh edit, parametric NURBS curves ...

Cnc's IP Data Volume Report: Logs IP to IP contact, number of packets, bytes, time of contact, Ethernet too! View via local web interface. Very simple for those who want to view who your computer is contacting the most!

The ADG library (Automatic Drawing Generation) is a set of functions focused on automating the drawing of mechanical parts. It is not a CAD system but a GObject-based library where a custom application can put common CAD entities such as paths, hatches and dimensions, to automatically create technical drawings. A demo application is provided in order to show the capabilities of the canvas. Although it is possible to interact with the library directly in C (that is what the adg-demo program is doing), the canvas is expected to be used from higher level languages, much in the same way as what done in the GNOME stack. Lua bindings based on LGI are already provided out of the box. The adg-lua project, downloadable from the "Files" section, provides Lua programs and demos that leverages these bindings.

AVRCNC is a CNC-Controller based on an ATMega8 and some other (cheap) hardware. Main advantages compared to L297+L298 are: - simpler to build - easier to expand - mega8 controlls motors directly - no time-critical tasks on PC

Coordinate rotation is useful when making PCB with 2+ layers. Based on a reference points (which are included in PCB production files during DIY manufacture) it is possible to layout different PCB layers during drilling, UV exposing, gluing &final cut. Each time PCB was dismounted from a CNC and mounted again, it will have some angle of rotation over a zero point (X=0, Y=0). Manual measurement of this rotation angle is performed with help of laser module mounted on the same CNC. For each reference point, travel CNC with a laser module and fine tune X/Y coordinates to target at the center of a drilled point (laser light will dim out). Write each of the measured point's coordinate with corresponding ideal (original) point coordinate into the reference point (text) file. Then use this utility with source G-Code file & measured reference file to perform transformation into a destination G-Code file. Each X/Y coordinate in "G0", "G00", "G01" commands will be rotated by a calculated angle.

Universal CNC (Computer Numerical Control) system with accompanying communication and graphics libraries

RoboFac is a software system for controlling a hexapod, also known as a Stewart-Gough platform. It features a G-Code interpreter for CNC machining.

A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.

Software application, firmware and U.I. for 4-motors 3-axis milling machine, open hardware, software and mechanics. See also project in details for schematics and images on http://www.contesti.eu/opensource/xyz-dc-motor-controller

piCNC is a PIC based stepper motor controller for use in CNC applications. Its software and hardware development is completely open source and community supported.