Search Results for "raspbian jessie with pixel"

First goal of the project is to create a C Library to easily use the GPIO of a raspberry PI 3 Under linux (currently raspbian jessie). Second goal is to create a program in order to dump cartridges of a 1970's videopac game console. Such a program run under raspberry PI 3 with the use of a dedicated hardware board.

A Raspbian Jessie Lite image for the e-Paper HAT (percheron electronics) http://www.percheron-electronics.uk/shop/ https://www.kickstarter.com/projects/1372954669/e-paper-display-hat-for-the-raspberry-pi/description Shows date, ip address and root storage usage

Unchanged Raspbain .img files repackaged using gzip for compatibility reasons Current raspberrypi.org zip files are version 45 (ZIp64) which is not well supported.

...https://en.wikipedia.org/wiki/NILFS To use: Extract the zip Ensure nilfs-tools are installed and a NILFS partition is mounted cd to extracted folder sudo python gNILFS.py You must run gNILFS as root in order to convert and mount the checkpoints. Running gNILFS without root will only show you partition details. I have installed and run this successfully on the latest Kali Linux, Raspbian Jessie and Ubuntu Distros. As long as you have GTK 3+ and Python 2 it should work on almost anything.

After wasting several hours following multiple tutorials attempting to install OpenCV and SimpleCV on a fresh Raspbian image only to end up with a combination of packages that were outdated or otherwise non-functional, once I found a working setup, I made this image to have a good point to go back to save time reinstalling all the dependencies. This is Raspbian Jessie (full) with Python OpenCV installed via apt-get and SimpleCV installed via pip

Turn a pi into an internet access point: Config 1: Network on wired ethernet, provides simple wifi access point (Pi3 alone - or Model B with USB wifi) Config 2: Connect to open (or stored) wifi and rebroadcast to another SSID e.g. for use with BTWiFi-with-FON requires 2 wifi interfaces (Pi-3 + 1 USB or Model B with 2x USB wifi) SSID: WifiBox Password: raspberry (change in /etc/hostapd.d/hostapd.conf) See source at https://github.com/mikerr/hotspot