Search Results for "multimeter"

SIxO is a software project for odometer, tripcounter and multimeter, suppporting many more features for any kind of vehicle. The essential microcontroller hardware (Renesas M16C, graphical display 128x64, casing, keyblock) can be ordered at www.sixo.de.

Decode and write to stdout the output of the Fortune Semiconductor FS9721 chip and the pin compatible Semico CS7721CN chip. These chips form the heart of multimeters, some of which send the contents of their display as a binary stream over transmitted via wireless, USB or RS232.

This library (the DLL), to work with a multimeter APPA-109N through physical or virtual COM port over USB in OS NT/2000/2003/XP/Vista/7/8, designed for querying, reading and decoding data measurements APPA WinDMM100 protocol 95/98 and sound measurement data. DLL provides universal access for other applications, regardless of the language in the environment Win OS. DLL for use in their projects comply with the agreement on stdcall-calls.

...http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

This is an inteface for the data acquisition cable for the UNI-T (Uni-trend) UT61D multimeter. It supports both USB (using libusb) and RS232 cables. The interface consists of a single C header file.

Small program currently running on Linux and MacOS to display the output of the wireless dongle of the Extech EX540/542 Wireless TRMS MultiMeter/Datalogger.

UDL is a Tool to log measurement result of several measurement devices e.g. Multimeter´s. The communication to the measurement device is encapsulated through an dll. So you can use measurement devices of different producers with one software.

OM Open-source multimeter is a hobby project of mine which is intended to do a multimeter's job and measure volt,ampere,ohm,capacitance and ... . the features would be high precision,plotting,computer connectivity,and of course being open source.

The Open Instrumentation Project provides open source software for graphical user interface and control of computer-based lab instruments. Current instruments include an oscilloscope, waveform generator, CircuitGear, multimeter and network analyser.

This is an improved version of logprotek.c. It logs and time stamps the readings from a Digital Multimeter, the Protek 6500 AC. It uses blocking I/O and covers most of the DMM modes. It works in Ubuntu 10.04 LTS.

This short c program logs and time stamps the readings from a Protek 6500 AC/AC+DC TRUE RMS Digital Multimeter. It was developed on Ubuntu Lucid Lynx. This version is old. There is a newer better version: Protek6500AC

DevLogger is a software framework used to collect, monitor, and log data from any number of instruments or input devices simultaneously. Initial support provides for serial connections to Radio Shack 22-812 multimeters and My Weigh HD Scales.

A perl program/script for capturing and displaying the serial port data from a 22-812 RadioShack multimeter, might work for others.

Zmeter is an RS232 serial interface program for the RadioShack 22812 (46 range) Digital Multi Meter (DMM). Zmeter captures the DMM display and outputs it in ASCII text to stdout.

gDMM is a GTK+ 2 based application which reads data from a Digital Multimeter (Metex/Voltcraft or compatible, e.g. M-3650D) through the serial interface (RS-232) and draws a graph out of this data. Measurements can also be saved to/loaded from disk.

the project work as a calculator electronics and electrical problems

Mido is a GUI for MultiPlatform Digital Oscilloscope with a generic multimeter and a spectrum analyzer. Mido can work in demo mode or using variuos extern analogic-digital converter connected in the parallel port. Kernel drivers are included

Simple VA18B multimeter interface. It reads data trasmitted by USB/Serial interface of VA18B multimeter and can put them into a CSV file.

A program to read the values from the RS232 interface of the M9803R desktop multimeter and provide them in readable format for use with gnuplot, scripts, etc.