Search Results for "esp32"
Sort By:
Showing 93 open source projects for "esp32"
View related business solutions-
Gen AI apps are built with MongoDB AtlasMongoDB Atlas provides built-in vector search and a flexible document model so developers can build, scale, and run gen AI apps without stitching together multiple databases. From LLM integration to semantic search, Atlas simplifies your AI architecture—and it’s free to get started.
-
Keep company data safe with Chrome EnterpriseMake AI work your way with Chrome Enterprise. Block unapproved sites and set custom data controls that align with your company's policies.
-
1
ESP32-CAM_MJPEG2SD
ESP32 Camera motion capture application to record JPEGs to SD card
Application for ESP32 / ESP32S3 with OV2640 / OV5640 camera to record JPEGs to SD card as AVI files and playback to the browser as an MJPEG stream. The AVI format allows recordings to replay at the correct frame rate on media players. If a microphone is installed then a WAV file is also created and stored in the AVI file. The ESP32 cannot support all of the features as it will run out of heap space. For better functionality and performance, use one of the new ESP32S3 camera boards, eg Freenove... -
2
ESP32-Paxcounter
Wifi & BLE driven passenger flow metering with cheap ESP32 boards
Wifi & Bluetooth driven, LoRaWAN enabled, battery-powered mini Paxcounter built on cheap ESP32 LoRa IoT boards. Paxcounter is an ESP32 MCU-based device for metering passenger flows in real time. It counts how many mobile devices are around. This gives an estimation of how many people are around. Paxcounter detects Wifi and Bluetooth signals in the air, focusing on mobile devices by evaluating their MAC addresses. The intention of this project is to do this without intrusion in privacy: You... -
3
Arduino core for the ESP32
Arduino core for the ESP32
ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth SoC (System On a Chip) designed by Espressif Systems. ESP32 is designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. It features all the state-of-the-art characteristics of low-power chips, including fine-grained clock gating, multiple power modes,and dynamic power scaling. For instance, in a low-power IoT sensor hub application scenario, ESP32 is woken-up periodically and only when a specified condition is detected... -
4
myFP2ESP32 WiFi ASCOM Focus Controller
ASCOM-INDI ESP32 Wifi focuser
An ESP32 WiFi focuser. DIY or PCB designs. (c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate CFZ https://sourceforge.net/projects/myfocuserpro2-esp32/files/CFZ%20Spreadsheets/CFZ... -
The All-in-One Commerce Platform for Businesses - ShopifyShopify is a leading all-in-one commerce platform that enables businesses to start, build, and grow their online and physical stores. It offers tools to create customized websites, manage inventory, process payments, and sell across multiple channels including online, in-person, wholesale, and global markets. The platform includes integrated marketing tools, analytics, and customer engagement features to help merchants reach and retain customers. Shopify supports thousands of third-party apps and offers developer-friendly APIs for custom solutions. With world-class checkout technology, Shopify powers over 150 million high-intent shoppers worldwide. Its reliable, scalable infrastructure ensures fast performance and seamless operations at any business size.
-
5
ESP32 Tetris
Tetris for ESP32 with Nintendo 64 controller support
Tetris for ESP32 with Nintendo 64 controller support. Based on the work of Brian Lough. Adapted for Nintendo 64 Controller by Maxim Bortnikov. GitHub repository: https://github.com/Northstrix/ESP32-Tetris-With-Nintendo-64-Controller Original project: https://github.com/witnessmenow/ESP32-Cheap-Yellow-Display/tree/main/Examples/Projects/TetrisWithNunchuck The tutorial is available at https://www.instructables.com/How-to-Play-Tetris-on-ESP32-CYD-With-Nintendo-64-C/ -
6
alphaess-esp32
Library to connect to AlphaESS cloud from esp32
Source code to speak to the AlphaESS Cloud to query/control devices of the brand from an ESP32 platform, and query the Entso-E (european electricity platform) for day-ahead prices. The sample application provides a service similar to commercial smart energy boxes that'll come at an installation cost + monthly fee. -
7
XiaoZhi AI Chatbot
Build your own AI friend
xiaozhi-esp32 is an open-source project that guides users in building their own AI-powered conversational companion using the ESP32 microcontroller. The project provides detailed instructions on assembling the hardware, setting up the software, and integrating AI models to enable natural language interactions. This DIY approach offers an accessible entry point into AI and hardware development. -
8
ESP32-S2-Mini
Arduino ESP32-S2-Mini v1.00 Wemos | Firmware PS4 900x HOST Wifi AP
Firmware para placa de desarrollo Arduino ESP32-S2 Mini v1.0.0 LOLIN-WIF WEMOS ESP32S2 Dev para Montar Servidor Host AP PlayStation 4 Herramienta web para instalar la última versión del Firmware: https://xdevgms.github.io/ Una vez instalado el firmware podrá conectar con la placa ESP32-S2 Mini vía Wifi WiFi SSID: PS4-Host-AP Password: password Página del administrador http://10.1.1.1/admin.html http://webkey.local/admin.html Nota Importante 1: En la sección configuración... -
9
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface... -
Simple, Secure Domain RegistrationRegister or renew your domain and pay only what we pay. No markups, hidden fees, or surprise add-ons. Choose from over 400 TLDs (.com, .ai, .dev). Every domain is integrated with Cloudflare's industry-leading DNS, CDN, and free SSL to make your site faster and more secure. Simple, secure, at-cost domain registration.
-
10
NodeMCU
Lua based interactive firmware for ESP8266, ESP8285 and ESP32
NodeMCU is an open source Lua-based firmware for the ESP8266 WiFi SOC from Espressif and uses an on-module flash-based SPIFFS file system. NodeMCU is implemented in C and is layered on the Espressif NON-OS SDK. The firmware was initially developed as a companion project to the popular ESP8266-based NodeMCU development modules, but the project is now community-supported, and the firmware can now be run on any ESP module. -
11
ESPHome
ESPHome is a system to control your ESP8266/ESP32
ESPHome is a system for defining and deploying custom firmware to ESP8266 and ESP32 microcontrollers for smart home automation. Using a simple YAML configuration, users can specify how sensors, switches, and devices should behave, and ESPHome compiles and flashes the firmware accordingly. Integrated seamlessly with Home Assistant, ESPHome is ideal for DIY home automation enthusiasts who want full control over their IoT devices. -
12
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
13
ESP-IDF
Espressif IoT Development Framework
ESP-IDF (Espressif IoT Development Framework) is the official, open-source development framework for programming Espressif SoCs (such as ESP32, ESP32‑S2, ESP32‑C3 series). It provides toolchains, APIs, components, sample code, and workflows for building embedded IoT firmware, offering support for Wi‑Fi, Bluetooth, power management, and peripheral integration. As well as the esp-idf-template project mentioned in Getting Started, ESP-IDF comes with some example projects in the examples directory... -
14
Midbar ESP32 CYD
A version of Midbar data vault tweaked specifically for the ESP32 CYD.
Midbar ESP32 CYD is a version Midbar data vault tweaked specifically for the ESP32 Cheap Yellow Display. The tutorial is available at: https://www.instructables.com/Midbar-ESP32-CYD/ GitHub: https://github.com/Northstrix/Midbar-ESP32-CYD -
15
Midbar ESP32 CYD Firebase Edition
A version of Midbar data vault adapted for the ESP32 CYD and WebFlash.
A version of Midbar data vault adapted for the ESP32 CYD and WebFlash. It keeps the cryptographic keys in the ESP32 RAM and stores the ciphertexts (encrypted data) in the Google Firebase. The tutorial is available at: https://www.instructables.com/How-to-Turn-ESP32-CYD-Into-a-Secure-IoT-Data-Vault/ WebFlash for ESP32-CYD: https://northstrix.github.io/Midbar-ESP32-CYD-Firebase-Edition/flash WebFlash for ESP32-CYD2USB: https://northstrix.github.io/Midbar-ESP32-CYD2USB-Firebase-Edition... -
16
LVGL
Powerful and easy-to-use embedded GUI library with many widgets
Powerful and easy-to-use embedded GUI library with many widgets, advanced visual effects (opacity, antialiasing, animations), and low memory requirements (16K RAM, 64K Flash). LVGL provides everything you need to create an embedded GUI with easy-to-use graphical elements, beautiful visual effects, and a low memory footprint. LVGL is an open-source graphics library providing everything you need to create an embedded GUI with easy-to-use graphical elements, beautiful visual effects, and a low... -
17
PixelIt
ESP8266/ESP32 and WS2812B LED Matrix based PixelArt display
PixelIt is an open-source firmware and hardware project designed to drive LED matrix displays using the ESP32 microcontroller. It's tailored for DIY enthusiasts and makers who want to create pixel art displays, show scrolling text, and integrate data from various APIs like weather or news. The project emphasizes customization and ease of use, allowing users to control displays via a web interface or REST API. -
18
ESP8266Audio
Arduino library to play MOD, WAV, FLAC, MIDI, RTTTL, MP3
Arduino library for parsing and decoding MOD, WAV, MP3, FLAC, MIDI, AAC, and RTTL files and playing them on an I2S DAC or even using a software-simulated delta-sigma DAC with dynamic 32x-128x oversampling. ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones. For real-time, autonomous speech synthesis, check out ESP8266SAM, a library that uses this one and a port of an ancient format-based synthesis program to allow your ESP8266... -
19
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in... -
20
DASH V4
Blazing fast library to create a functional dashboard on ESP8266
DASH V4 is the 4th-gen blazing fast library to create a functional & real-time dashboard for ESP8266 & ESP32 microcontrollers. This library includes charts, display cards, interactive buttons and many more components to create a perfect dashboard that is accessible locally via your IoT device's IP. DASH does not require any kind of internet connection, everything is stored locally. -
21
Mongoose Embedded Web Server
An embedded web server
... architectures: ESP32, NRF52, STM32, NXP, and more. Built-in protocols: plain TCP/UDP, HTTP, MQTT, Websocket. SSL/TLS support: mbedTLS, OpenSSL or custom (via API). Used to solve a wide range of business needs, like implementing Web UI interface on devices, RESTful API services, telemetry data exchange, remote control for a product, remote software updates, remote monitoring, and others. -
22
ESP32 CYD ESL with Firebase
ESP32 CYD version of the Electronic Shelf Label.
A version of the Electronic Shelf Label that utilizes the ESP32 CYD. GitHub repository: https://github.com/Northstrix/ESP32-Cheap-Yellow-Display-Electronic-Shelf-Label-with-Google-Firebase The tutorial is available at https://www.instructables.com/ESP32-CYD-ESL/ WebFlash: https://northstrix.github.io/ESP32-Cheap-Yellow-Display-Electronic-Shelf-Label-with-Google-Firebase/flash.html Format Flash area designated for SPIFFS with ESP32 Filesystem Uploader (https://github.com/me-no-dev/arduino... -
23
ESP32 ACME client
ESP32 library for ACME protocol client (to get certificates)
ACME client library for ESP32 Copyright © 2019, 2020, 2021, 2023, 2024 by Danny Backx ACME is a protocol (see https://tools.ietf.org/html/rfc8555 for automatic certificate management. Sites such as letsencrypt.org allow you to obtain free (no charge) certificates in an automated way using the ACME protocol. This library allows you to get certificates for IoT devices based on the ESP32. More info in https://sourceforge.net/p/esp32-acme-client/code/HEAD/tree/trunk/Readme.md... -
24
WiFiManager
WiFi Connection manager with web captive portal
Espressif ESPx WiFi Connection manager with fallback web configuration portal. The configuration portal is of the captive variety, so on various devices it will present the configuration dialogue as soon as you connect to the created access point. When your ESP starts up, it sets it up in Station mode and tries to connect to a previously saved Access Point. If this is unsuccessful (or no previous network saved) it moves the ESP into Access Point mode and spins up a DNS and WebServer (default... -
25
OpenAI Realtime Embedded
Instructions on how to use the Realtime API on Microcontrollers
openai-realtime-embedded is a repository that provides resources, SDKs, and example links for using OpenAI’s Realtime API on embedded hardware platforms (e.g. microcontrollers). The goal is to enable low-latency conversational agents (e.g. voice-based assistants) running directly on constrained devices, by leveraging WebRTC and streaming APIs to communicate with OpenAI systems. The repo includes pointers to an ESP32 implementation (maintained as esp32 branch) and documentation that Espressif...
