Audience
IT teams looking for a Router device that has PoE-in and PoE-out on all ports
About RB5009UPr+S+IN
This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those.
Other Popular Alternatives & Related Software
PowerBox Pro
Five Gigabit Ethernet router with 4xPoE-out ports, SFP cage, and outdoor enclosure. The PowerBox Pro is an outdoor five-gigabit Ethernet port router with PoE output on four ports. Since the device has a weatherproof outdoor case, you can mount it on a tower, or in other outdoor locations. It also supports passive PoE input and passive or 802.3af/at PoE output. Ethernet ports 2-5 can power other PoE-capable devices with the same voltage as applied to the unit. Fewer power adapters and cables to worry about! It can power 802.3at and af mode B compatible devices if 48-57 input voltage is used. The device has an SFP port for adding optical fiber connectivity. It is affordable, small, and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use.
Learn more
FiberBox Plus
There are two ways to look at the brand new Fiber Box Plus. On the one hand, it’s a massive upgrade of our previous FiberBox devices. This version features a modern ARM CPU, more RAM, and four 10-Gigabit SFP+ ports. Fast and reliable connectivity on a budget. Without the distance limitations of Ethernet. There’s also a Gigabit Ethernet port for management purposes or PoE-in powering. We’ve also included a 2-pin terminal and a standard DC jack, so you have 3 different power options to choose from. FiberBox Plus supports a wide input voltage range of 24-57V. And it is remarkably efficient: maximum power consumption (without attachments) is only 7W. Another way to look at the new FiberBox Plus – it’s a budget version of the amazing netFiber 9. You can save a lot of money if you don’t need the extra Gigabit SFP ports. It even features the same impressive Marvell 98DX226S switch-chip, so the performance is definitely there!
Learn more
CCR2216-1G-12XS-2XQ
Start your 100 Gigabit journey with our new flagship product: the Cloud Core Router 2216! Its powerful 16-core CPU can trade blows with the mighty 72-core Tile CPU of our previous flagship - the CCR1072. But the exceptional Marvell Prestera Aldrin2 switch-chip really takes it to the next level with L3 Hardware Offloading! Our previous CCR2116 featured a switch-chip with four 10G CPU connection lines, but this time there are four 25G lines! There are 2x QSFP28 cages for blazing-fast 100 Gigabit connectivity, 12x SFP28 cages for 25 Gigabit networking, and a Gigabit Ethernet port. The device comes with 16 GB of RAM, decent NAND storage, and two M.2 SATA slots for additional storage. There are four hot-swappable fans, as well as dual-redundant hot-swap power supplies. And these PSUs might look familiar if you have used our CCR1072 before: you can keep using your previous hot-swap power supplies and SFP modules.
Learn more
RB2011iLS-IN
Desktop metal case, 5xEthernet, 5xGigabit Ethernet, SFP cage, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. RB2011iLS is our first product with SFP cage for gigabit SFP transceivers and an ideal solution for FTTH (Fiber To The Home) implementations. The RB2011iLS has 11 ports, Gigabit SFP cage and five Gigabit Ethernet ports that can be switched together providing an affordable wire-speed fiber-to-copper converter, and additional five fast Ethernet ports. The board can be powered by power jack or PoE. Note that SFP transceiver is not included. RB2011iLS supports any 1.25G SFP transceivers that are within the SFF committee specifications for SFP transceivers. RB2011LS doesn’t have hardware support for PON (Passive Optical Network). Tested and recommended to use with MikroTik SFP modules S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license.
Learn more
Pricing
Starting Price:
$299 one-time payment
Integrations
No integrations listed.
Company Information
MikroTik
Founded: 2009
United States
mikrotik.com/product/rb5009upr_s_in
Videos and Screen Captures
Other Useful Business Software
Level Up Your Cyber Defense with External Threat Management
Move beyond alerts. Gain full visibility, context, and control over your external attack surface to stay ahead of every threat.
Product Details
Training
Documentation
Webinars
In Person
Videos
Support
Online