Alternatives to 6SigmaET
Compare 6SigmaET alternatives for your business or organization using the curated list below. SourceForge ranks the best alternatives to 6SigmaET in 2026. Compare features, ratings, user reviews, pricing, and more from 6SigmaET competitors and alternatives in order to make an informed decision for your business.
-
1
Azore CFD
Azore CFD
AzoreCFD has been a trusted, cutting-edge software tool since 2007. Azore focuses on analysis, design, engineering, and on obtaining precise, and quick results. Customers use Azore for applications that include: industrial flows, aerodynamics, thermal mixing, conjugate heat transfer, gas species mixing, heating and cooling systems, external flows, and more. Azore can be used to simulate essentially any steady-state or transient fluid flow model, including problems that involve conjugate heat transfer and special transport. With flexible pre/post processing, Azore allows for arbitrary polyhedral mesh topology with several import formats supported. Built-in post-processing capabilities includes: scalar fields, pathlines, animations, residual reports, vector fields, ISO-surfaces, force & movement reports, and export for external post-processing. -
2
Altair SimSolid
Altair
By performing structural analyses on fully featured CAD assemblies within minutes, SimSolid is the game-changing simulation technology for designers, engineers, and analysts. It eliminates geometry preparation and meshing: the two most time-consuming, expertise-extensive and error-prone tasks performed in a conventional structural simulation. Multiple design scenarios can be simulated quickly under real-life conditions. Early CAD models, in any common format, can be used. SimSolid tolerance of imprecise geometry means that, unlike CAD-embedded simulation tools, there is no need to simplify complex geometries before analyzing designs. SimSolid supports all typical connections (bolt/nut, bonded, welds, rivets, sliding) and analysis of linear static, modal, thermal properties, along with more complex coupled, nonlinear, transient dynamic effects. -
3
Orbital Stack
Orbital Stack
Orbital Stack is an AI and CFD web-based software that provides earlier qualitative guidance, comparing a large number of design options while highlighting any potential wind and thermal comfort red flags. It allows for the realization of a variety of climate-conscious, high-performance developments not previously feasible due to cost and/or time constraints associated with traditional studies. Orbital Stack is the first digital climate-analysis tool built by global leaders in wind and microclimate engineering using real wind tunnel data. It is truly a game-changer for the architecture and building design sector, offering our clients direct access to wind comfort and safety analysis, thermal comfort and shadowing analysis, and cladding pressure simulations. This means architects can run their own wind simulations and quickly understand the climate impacts of their proposed building designs from the start, making decisions that result in higher performing and more resilient projects.Starting Price: $0 -
4
Diabatix ColdStream
Diabatix
ColdStream is a cloud-native thermal simulation engineering platform that supports your entire thermal management and cooling design process, from thermal analysis to thermal design. Diabatix's thermal simulation software lets your business speed up product development using only state-of-the-art technologies. Get essential heat transfer analyses and insights into temperature distribution, heat dissipation, fluid flow, thermal resistance, thermal radiation, cooling capacity, and more. Do not spend more time looking for the best-suited heat sinks to cool your electronic devices and products, let ColdStream do this for you. You can upload the geometry, configure the thermal simulation operating conditions, and set up the design objectives of your heat sinks in just a few clicks.Starting Price: €4,000 per month -
5
SimScale
SimScale
SimScale is a cloud-based web application that plays a key part in simulation software for many kinds of industries. The platform allows the use of Computational Fluid Dynamics (CFD), Finite Element Analysis (FEA), and Thermal Simulation. It also offers 3D simulation, continuous modeling, and motion & dynamic modeling. -
6
Simcenter Flotherm
Siemens
With more than 34 years of development and user feedback, Simcenter Flotherm is the leading electronic cooling simulation software solution for electronic thermal analysis. It shortens development at IC package, PCB, and enclosure level through to large systems such as data centers. Improve electronics thermal management for reliability with fast, accurate electronics cooling CFD simulation from initial pre-CAD exploration to final verification. Simcenter Flotherm integrates with the electronics development workflow as a tool for thermal engineers to perform simulations and provide timely accurate results and feedback to other engineering functions. It supports thermal management, and simulation-based decision-making from early-stage architecture to final thermal design verification. This aids shortened development and also helps to eliminate risks of costly reliability-related warranty costs or any late-stage re-spins. -
7
Ansys Sherlock
Ansys
Ansys Sherlock is the only reliability physics-based electronics design tool that provides fast and accurate life predictions for electronic hardware at the component, board and system levels in early stage design. Ansys Sherlock automated design analysis provides fast and accurate life predictions for electronic hardware at the component, board and system levels in early design stages. Sherlock bypasses the ‘test-fail-fix-repeat’ cycle by empowering designers to accurately model silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs) and assemblies to predict failure risks due to thermal, mechanical and manufacturing stressors--all before prototype. With embedded libraries containing over 500,000 parts, Sherlock rapidly converts electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each model contains accurate geometries, material properties and translates stress information. -
8
TAITherm
ThermoAnalytics
Simulate the complete range of heat transfer phenomena, from convection to radiation, storage to dissipation, and steady-state to dynamic and transient environmental influences. TAITherm thermal analysis software is as easy to use as it is powerful. It solves for solar and thermal radiation, convection, and conduction, including ever-changing environments. TAITherm removes the burden of complicated thermal simulations and ensures that your design will function optimally in real-world scenarios. TAITherm is used by thousands of engineers and teams around the globe. Our customers use TAITherm for an array of applications including the latest advancements in automotive, electronics, wearables, military technology, architecture, and more. Our customers are pushing the boundaries of new technology by increasing usability, safety, and effectiveness in their industries through thermal simulations and thermal analysis. -
9
Ansys Icepak
Ansys
Ansys Icepak is a CFD solver for electronics thermal management. It predicts airflow, temperature, and heat transfer in IC packages, PCBs, electronic assemblies/enclosures, and power electronics. Ansys Icepak provides powerful electronic cooling solutions that utilize the industry-leading Ansys Fluent computational fluid dynamics (CFD) solver for thermal and fluid flow analyses of integrated circuits (ICs), packages, printed circuit boards (PCBs), and electronic assemblies. The Ansys Icepak CFD solver uses the Ansys Electronics Desktop (AEDT) graphical user interface (GUI). Perform conduction, convection, and radiation conjugate heat transfer analyses, with many advanced capabilities to model laminar and turbulent flows, and species analysis including radiation and convection. Ansys’ complete PCB design solution enables you to simulate PCBs, ICs, and packages and accurately evaluate an entire system. -
10
Autodesk CFD
Autodesk
Autodesk CFD is a computational fluid dynamics simulation software that engineers and analysts use to intelligently predict how liquids and gases will perform. Autodesk CFD helps to minimize the need for physical prototypes while providing deeper insight into fluid flow design performance. Autodesk CFD provides engineers with a range of powerful tools for system design optimization. Fluid flow and free surface movement. Thermal management for electronics cooling. BIM integration for occupant comfort of HVAC in AEC and MEP. The Application Programming Interface (API) and scripting functions expand the base capabilities of Autodesk CFD through the Decision Center’s customization and automation of common tasks. In addition, the Decision Center automates system design comparisons to speed up design-based decision making. -
11
SINDA/FLUINT
C&R Technologies
For decades, SINDA/FLUINT has provided users with proven and powerful heat transfer and fluids analysis capabilities that continue to expand each year. SINDA/FLUINT is a comprehensive, generalized tool for simulating complex thermal/fluid systems such as those found in the electronics, automotive, petrochemical, power generation, medical, and aerospace industries. SINDA/FLUINT saves time and money by making the design process faster and easier, letting you gain a better understanding of your complex system. You control what is important and how to get the answer to your design performance questions using the most efficient approach. Furthermore, the application is completely extensible making it perhaps the most versatile thermal and fluids software product on the market. You choose the features you want, decide what levels of accuracy and approximation are appropriate, and what outputs are needed. -
12
FloCAD
C&R Technologies
FloCAD® is a fluid dynamics software add-on module for Thermal Desktop®, together they provide a complete thermohydraulic software tool for fully integrated fluid flow and heat transfer analysis. With FloCAD, the mechanics of building fluid flow models is very similar to that of building thermal models, with many of the commands applicable to both types of models. FloCAD models can be free-form (non-geometric), sketchpad style flow network modeling for abstraction and simplification, or they can be geometry-based by including objects such as pipe centerlines and cross-sections, complexly shaped vessels, or convection to finite difference of finite element representations of thermal structures. As a generalized pipe flow software tool, FloCAD captures the pressure drops in a piping network due to bends, valves, tees, changes in flow area, etc. -
13
PowerFLOW
Dassault Systèmes
By leveraging our unique, inherently transient Lattice Boltzmann-based physics PowerFLOW CFD solution performs simulations that accurately predict real world conditions. Using the PowerFLOW suite, engineers evaluate product performance early in the design process prior to any prototype being built — when the impact of change is most significant for design and budgets. PowerFLOW imports fully complex model geometry and accurately and efficiently performs aerodynamic, aeroacoustic and thermal management simulations. Automated domain discretization and turbulence modeling with wall treatment eliminates the need for manual volume meshing and boundary layer meshing. Confidently run PowerFLOW simulations using large number of compute cores on common High Performance Computing (HPC) platforms. -
14
STARe Thermal Analysis
METTLER TOLEDO
Our STARe software is the standard in thermal analysis, providing nearly limitless evaluation possibilities. Its unique features include modularity, flexibility, and automation. The software also helps you to remain compliant within a regulated industry. All of our thermal analysis systems are controlled from one powerful software platform. We offer a comprehensive line of thermal analysis systems with the best variety of instruments. Our thermal analysis software STARe is powerful and easy to use. Measurements and experiments are sent to the instruments, and the resulting curves can then be evaluated immediately based on the user’s wishes. STARe sets the standard for thermal analysis software. It is an extremely versatile software that offers extreme flexibility and almost limitless evaluation possibilities. STARe is a comprehensive software that powers all of METTLER TOLDEO’s thermal analysis systems, further simplifying workflows. -
15
Altair Activate
Altair
Altair Activate can be applied to model and simulate a broad range of products as a system-of-systems to discover better designs, faster. Products in every industry are becoming increasingly complex and electrified, as well as smarter and more connected. Multi-disciplinary system-level simulation capabilities help develop smart, complex mechatronic systems holistically while enabling more streamlined product development teamwork and workflows. Altair Activate breaks down silos between mechanical subsystems, electrical subsystems, control subsystems, electronic subsystems, software, hardware-in-the-loop, data analytics, and more. Model thermal-fluid system dynamics using 1D modeling &and simulation (rather than using only 3D CFD) to yield nearly-as-accurate results significantly faster – to enable more design exploration and optimized performance in less time. -
16
Thermal Desktop
C&R Technologies
Thermal Desktop includes all aspects of model creation. Built-in finite difference, finite element, and lumped capacitance objects can be combined in any configuration. Thermal-specific objects such as contact conductance, insulation, heat loads, and heaters can be added to model anything from automotive components to manned spacecraft. Thermal Desktop provides full parameterization using variables and arbitrarily complex expressions as input rather than hardwired numbers. These variables, called symbols, allow models to be rapidly manipulated with a few keystrokes, meaning updating or maintaining the model is easy, as is performing sensitivity studies and investigating what-if scenarios. This also provides access to SINDA/FLUINT’s optimization and reliability modules and automatic model correlation. -
17
Frost 3D Universal
Simmakers
Frost 3D software allows you to develop scientific models of permafrost thermal regimes under the thermal influence of pipelines, production wells, hydraulic constructions, etc., taking into account the thermal stabilization of the ground. The software package is based on ten years experience in the field of programming, computational geometry, numerical methods, 3D visualization, and parallelization of computational algorithms. Creation of 3D computational domain with surface topography and soil lithology; 3D reconstruction of pipelines, boreholes, basements, and foundations of buildings; Import of 3D objects including Wavefront (OBJ), StereoLitho (STL), 3D Studio Max (3DS) and Frost 3D Objects (F3O); Library of thermophysical properties of the ground, building elements, climatic factors and the parameters of cooling units; Specification of thermal and hydrological properties of 3D objects and heat transfer parameters on the surfaces of objects. -
18
CAPlite
EKK, INC.
Capture the power of natural solidification thermal analyses within an affordable and capable software package. CAPlite features a step-by-step graphical interface, making it ideal even for those not experienced in casting software. Starting with a CAD design, CAPlite guides you through every step, from meshing to post-processing. Natural solidifications are effective thermal simulation that gives results within minutes. From die casting to sand casting, CAPlite can identify problems for all casting types. The simplicity of natural solidifications enables them to augment your entire casting operation at every stage: design risers, gating, and chill configurations to identify defects, or simply help visualize the otherwise abstract process of solidification. CAPlite comes with the power of natural solidifications plus more to give you the tools you need to improve your castings at a fraction of the cost. -
19
Pyris
PerkinElmer
Your PerkinElmer thermal analysis instruments and data come to life on the Pyris™ software platform, the benchmark in high-sensitivity thermal analysis. Pyris is the preferred choice in thermal analysis because it is intuitive and user-friendly, and provides a wide range of standard features and capabilities for maximum flexibility. Whether in a totally automated research laboratory, an automated QA/QC lab, or a stand-alone instrument, you can be sure that the Pyris software meets your operating requirements. To ensure the highest user satisfaction, we designed and continuously enhanced Pyris software based on customer feedback. A common platform for all instruments makes it easy to use and quick to learn. Pyris software is easy to use without losing capabilities. The software has been designed to allow you to conduct data acquisition and analysis in one window, and run multiple analyzers simultaneously. A wide range of analysis options, and data import/export flexibility.Starting Price: $1,720 one-time payment -
20
Ansys Fluent
Ansys
Ansys Fluent is the industry-leading fluid simulation software known for its advanced physics modeling capabilities and industry leading accuracy. Ansys Fluent gives you more time to innovate and optimize product performance. Trust your simulation results with a software that has been extensively validated across a wide range of applications. With Ansys Fluent, you can create advanced physics models and analyze a variety of fluids phenomena—all in a customizable and intuitive space. Accelerate your design cycle with this powerful fluid simulation software. Ansys Fluent contains the best-in class physics models and can accurately and efficiently solve large , complex models. Ansys Fluent unlocks new potentials for CFD analysis. A fluid simulation software with fast pre-processing and faster solve times to help you be the fastest to break into the market. Fluent’s industry leading features enable limitless innovation, while never making a compromise on accuracy. -
21
SimulationX
ESI Group
Technical systems, like machines and manufacturing plants, are often very complex. They consist of a multitude of components and subsystems, usually based on diverse technical domains and increasingly fitted with sensors and controls. Their dynamic interactions have a significant impact on safety, performance, and comfort. With SimulationX, you have a single platform for modeling, simulating, and analyzing technical systems, including mechanics, hydraulics, pneumatics, electronics, and controls, as well as thermal, magnetic, and other physical behavior. Comprehensive component libraries with application-oriented model elements ensure you have the right tools available for your task. -
22
CoTherm
Thermo Analytics
CoTherm is a coupling and process automation software that acts as an ambassador between CAE programs. CoTherm makes process automation simple. It is useful for running sensitivity studies, a design of experiments, or running multiple CAE models as part of a single process. This capability can streamline pre-processing, transient analysis thermal analysis, or post-processing. With a CoTherm software license, we provide templates for common coupling or automation tasks. CoTherm includes optimization capabilities that determine which inputs used in your design are the best choice. Any CAE analysis can be optimized using the general optimization sub-processes. CoTherm's mathematically rigorous solution (including multiple global and local methods) removes guesswork and complexity from your design process. CoTherm natively supports many popular thermal and CFD codes. CoTherm's powerful tools allow the coupling of any software that can run in the command line or with config files. -
23
Simcenter Nastran
Siemens
Simcenter Nastran is a premier finite element method (FEM) solver for computational performance, accuracy, reliability and scalability. Simcenter Nastran includes powerful solutions for linear and nonlinear structural analysis, structural dynamics, acoustics, rotor dynamics, aeroelasticity, thermal analysis, and optimization. The advantage to having all these solutions available in a single solver is that input/output file formats are the same for all solution types, which greatly simplifies modeling processes. Available as a standalone enterprise solver or as an integrated solver in Simcenter 3D, Simcenter Nastran helps manufacturers as well as engineering suppliers in aerospace, automotive, electronics, heavy machinery, medical device, and other industries for their critical engineering computing needs so they can produce safe, reliable and optimized designs within ever shorter design cycles. -
24
RadCAD
C&R Technologies
An ultra-fast, oct-tree accelerated Monte-Carlo ray tracing algorithm is used by RadCAD to compute radiation exchange factors and view factors. Innovations by C&R Technologies to the ray tracing process have resulted in an extremely efficient thermal radiation software tool. Using finite difference "conics" (simple geometric objects) or curved finite elements from TD Direct®, RadCAD can accurately model diffuse or specular reflections and transmissive surfaces regardless of node density. The needs of the thermal solution dictate the number of nodes, not the accuracy requirements of the radiation. RadCAD makes use of user-defined databases of optical properties. Each surface coating defines absorptivity, transmissivity, and reflectivity along with specularity in both the solar and infrared wavelength regimes. These properties can be defined versus incident angle or even with wavelength dependence. -
25
SigmaNEST
SigmaTEK Systems
SigmaNEST is simply the best nesting software in the industry. Developed and supported by an expert team of mathematicians and engineers, SigmaNEST offers unparalleled material utilization and nesting efficiency. With unmatched versatility and maximum scalability, you can be confident in SigmaNEST’s abilities to meet your requirements, from quote to delivery and beyond. SigmaNEST drives nearly every type of profile cutting, routing, or punching machine to produce premium quality parts while saving valuable material and manpower. SigmaNEST offers CAD integration, an intuitive interface, and local customer support, which sets the software apart and are all reasons why SigmaNEST is the industry leader with over 21,000 systems installed worldwide. Nesting strategies for complex machines account for hold downs, clamps, repositioning, bevel cutting, and secondary processes. Effortlessly nest parts for specialized operations and materials like right angle shear, drop door part ejection. -
26
MacroFlow
Innovative Research
MacroFlow is a powerful software tool for rapid and accurate flow and thermal design of flow systems in a wide variety of engineering applications. The underlying technique of Flow Network Modeling (FNM) involves the representation of a flow system as a network of components and flow paths with the overall flow and thermal characteristics. The system behavior is determined through a system-level direct solution of the mass, momentum, and energy conservation equations. MacroFlow has an intuitive Graphical User Interface (GUI) that allows quick construction of complex network models. The component library in MacroFlow is very extensive. It includes standard geometric components and components that are used in electronics cooling, semiconductor processing, and filtration systems along with vendor libraries. The solution method is very robust and efficient with analysis of a typical practical flow system completed in less than a minute. -
27
Abaqus
Dassault Systèmes
Today, product simulation is often being performed by engineering groups using niche simulation tools from different vendors to simulate various design attributes. The use of multiple vendor software products creates inefficiencies and increases costs. SIMULIA delivers a scalable suite of unified analysis products that allow all users, regardless of their simulation expertise or domain focus, to collaborate and seamlessly share simulation data and approved methods without loss of information fidelity. The Abaqus Unified FEA product suite offers powerful and complete solutions for both routine and sophisticated engineering problems covering a vast spectrum of industrial applications. In the automotive industry engineering work groups are able to consider full vehicle loads, dynamic vibration, multibody systems, impact/crash, nonlinear static, thermal coupling, and acoustic-structural coupling using a common model data structure and integrated solver technology. -
28
COMSOL Multiphysics
Comsol Group
Simulate real-world designs, devices, and processes with multiphysics software from COMSOL. General-purpose simulation software based on advanced numerical methods. Fully coupled multiphysics and single-physics modeling capabilities. Complete modeling workflow, from geometry to postprocessing. User-friendly tools for building and deploying simulation apps. The COMSOL Multiphysics® software brings a user interface and experience that is always the same, regardless of engineering application and physics phenomena. Add-on modules provide specialized functionality for electromagnetics, structural mechanics, acoustics, fluid flow, heat transfer, and chemical engineering. Choose from a list of LiveLink™ products to interface directly with CAD and other third-party software. Deploy simulation applications with COMSOL Compiler™ and COMSOL Server™. Create physics-based models and simulation applications with this software platform. -
29
Synthelyzer™ ECAD Plugin
BQR Reliability Engineering
Effortless Electrical Stress Analysis, MTBF Calculation, Component Derating, and FMECA Analysis Within Your ECAD During Board Design. Key features: • Utilizes cutting-edge AI technology for robust and efficient design solutions. •Seamless integration with leading ECAD software for streamlined workflow and real-time analysis. •Includes automated circuit stress calculators to accelerate design processes. •Performs detailed analysis of electrical stress derating for components. •Utilizes thermal simulation results to enhance derating accuracy. •Provides thermal resistance data and stress metrics for 3D thermal simulations. •Identifies EOS violations with Pareto analysis and detailed reports on over-stress and over-design. •Recommends design adjustments to resolve overstress issues effectively. •Implements derating guidelines managed for optimal component performance. •Automates FMECA analysis -
30
Sentaurus Process
Synopsys
Sentaurus Process is an advanced 1D, 2D and 3D process simulator for developing and optimizing silicon semiconductor process technologies. It is a new-generation process simulator for addressing the challenges found in current and future process technologies. Equipped with a set of advanced process models, which include default parameters calibrated with data from equipment vendors, Sentaurus Process provides a predictive framework for simulating a broad range of technologies from nanoscale CMOS to large-scale high-voltage power devices. Sentaurus Process is part of a comprehensive suite of core TCAD products for multi-dimensional process, device, and system simulations, embedded into a powerful user interface. Fast prototyping, development, and optimization of a broad range of technologies with comprehensive physics-based process modeling capabilities. Enhance device performance by optimization of thermal and mechanical stress in process structures with stress history. -
31
Analytic Solver
Frontline Systems
Analytic Solver Optimization - 100% upward compatible from the Excel Solver - handles every type and size of the conventional optimization problem (without uncertainty). Unlike other optimization software, it algebraically analyzes your model structure and maximally exploits multiple cores in your PC. You can solve nonlinear models 10 times larger, and linear models 40 times larger than the Excel Solver, get solutions much faster – and plug-in Solver Engines to handle up to millions of variables! Analytic Solver Simulation gives you easy-to-use, powerful Monte Carlo simulation and risk analysis, decision trees, and simulation optimization using Frontline’s advanced Evolutionary Solver. With 60 probability distributions plus compound distributions, automatic distribution fitting, rank-order and copula-based correlation, 80 statistics, risk measures and Six Sigma functions, multiple parameterized simulations and more. -
32
OPTIMICA Compiler Toolkit
MODELON
Modelon’s OPTIMICA Compiler Toolkit, the most advanced Modelica-based mathematical engine on the market, offers users a powerful solution for the automation, simulation and optimization of system behaviors throughout the model-based design cycle. Trusted as the compiler for Modelon Impact, OPTIMICA enables users to build multi-domain physical systems by choosing from thousands of available model components. OPTIMICA’s state-of-the-art solvers empower evaluation of complex physical systems – supporting transient simulations as well as steady-state computations and dynamic optimization. The sophisticated mathematical engine can manipulate and simplify models to improve performance and robustness, serving industries and applications ranging from automotive and active safety to energy and power plant optimization. To meet the increased need for regulating power in today’s energy market, start-up optimization of thermal power plants is a key industrial need. -
33
MSC Nastran
MSC Software
MSC Nastran is a multidisciplinary structural analysis application used by engineers to perform static, dynamic, and thermal analysis across the linear and nonlinear domains, complemented with automated structural optimization and award winning embedded fatigue analysis technologies, all enabled by high performance computing. Engineers use MSC Nastran to ensure structural systems have the necessary strength, stiffness, and life to preclude failure (excess stresses, resonance, buckling, or detrimental deformations) that may compromise structural function and safety. MSC Nastran is also used to improve the economy and passenger comfort of structural designs. Optimize the performance of existing designs or develop unique product differentiators, leading to industry advantages over competitors. Remedy structural issues that may occur during a product’s service, reducing downtime and costs. -
34
Creo Simulation
PTC
Enhance your product design with simulation and analysis to reduce costly physical prototyping while increasing your products' durability, reliability, and safety. Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development process. Creo Simulation is designed uniquely for the engineer. It comes complete with structural, thermal, and vibration analysis solutions and a comprehensive set of finite elements analysis (FEA) capabilities. With Creo Simulation, you can analyze and validate the performance of your 3D virtual prototypes before you make the first part. We offer flexible and unique simulation solutions for our customers. Utilize this section to gain insights into what we offer to fit your needs. If you have any questions about our tool stack, feel free to contact a Creo representative. -
35
Effective estate and portfolio management can lead to significant cost savings. However, maintaining a reliable database, and processing and validating utility bills can be demanding on an organization’s resources. Receiving electronic utility bills can be fundamental for organizations in ensuring data accuracy, alleviating resources, and maximizing cost recoveries. Our Sigma EDI Billing software gives you the power to generate accurate industry standard EDI bills for your customers quickly and efficiently. The sophisticated solution generates electronic bills from your existing billing system. It can generate files for any utility in any format including the TRADACOMS industry standard. With extensive distribution tools and flexible invoice designs, your EDI bills can be tailored to meet your corporate brand requirements. We will work in partnership with you to seamlessly implement Sigma EDI Billing, so you can continue billing, with no interference to your current operations.
-
36
SIGMA 1040-TW
Sigma Tax Pro
Sigma 1040-TW is Sigma Tax Pro’s most customizable service package. Sigma 1040-TW includes everything you need to make your tax preparation business successful this tax season. Our 1040-TW product comes in desktop and web based versions, if you need to file business returns such as Forms 1120 or 1065 you will need the desktop version. Sigma clients have their own dedicated account manager who will work with them throughout tax season to assist with tax preparation and software support. Sigma also offers a full range of bank products that can be used to ensure a best in class customer experience. Clients can receive their refunds quicker and easier choosing from direct deposit, in office check printing, as well as prepaid VISA/MasterCard options. Sigma 1040-TW service package also includes a premium software solution. It offers multiple formats such as ProFiling, Executive, Power, Executive Accounting and Power Accounting. You pick the Sigma 1040-TW format that suits your needs. -
37
Sigma energy and carbon management software will optimise your energy management and sustainability strategy with a structured, co-ordinated and integrated approach. Acting as a single data repository for your entire energy estate, Sigma simplifies the complexities of energy management. The innovative solution helps you to efficiently establish and drive your digital energy management strategy, cut your carbon emissions, implement new processes and policies, streamline resource and reduce overheads, all within one system. With data quality at the heart of the software, Sigma is a complete Monitoring and Targeting (M&T) solution which includes innovative meter data monitoring, validation, alerting and automated gap-filling capability. Sigma builds a robust data foundation with accurate, complete, consistent and timely data; providing a single version of the truth and the ability to deliver all reporting and compliance requirements with confidence. Sigma’s Energy Intelligence module turn
-
38
Pipe Flow Calculations
Zoran Savovic PR Application Services
Fast & Accurate Fluid Flow Calculations. Pipe Flow Calculator is essential for engineers, students, and professionals working with fluid dynamics. With 18 desktop calculators, it solves simple and complex fluid flow problems in under a minute—GUARANTEED. Why Choose Pipe Flow Calculator? ✅ Easy to Use – Just enter values and get instant results. ✅ Trusted Worldwide – Used daily by thousands of professionals. ✅ Reliable & Updated – Bug fixes within 1-2 days. ✅ Transparent Calculations – All formulas are provided. Key Features ✔️ Switch between metric and imperial units. ✔️ Select pipes, materials, and fluids from predefined lists. ✔️ Export results to Excel & Word, save, print, and continue where you left off. ✔️ Copy/paste full calculation reports. Available Calculators 🔹 Pressure Drop, Pipe Diameter, Pump Performance, Reynolds Number 🔹 Orifice Plate, Venturi Tube, Nozzle, Prandtl Probe 🔹 Control Valve, Gas Flow, LPG, Thermal EnergyStarting Price: $9.95/month -
39
ENVI-met
ENVI-met
ENVI-met is a 3D microclimate simulation software. The software is used for a wide range of applications, including urban planning, building design, and energy efficiency, considering not only one single climate parameter, but all of them. ENVI-met can simulate a variety of climate conditions, including day- and night-time temperatures, humidity, wind speed, and solar radiation in cities. The software can also simulate the effects of different building materials, such as glass and stone, on the climate of the surrounding environments. The program is used to predict the effects of urban design changes on the microclimate environment and human thermal comfort for people in cities worldwide. As climate change is having a major impact on our planet, it is essential, that more healthier and resilient cities are developed. To support these goals ENVI-met can be used to assess the potential of new buildings, green spaces, and urban planning and to make informed decisions.Starting Price: €290 one-time payment -
40
CAESIM
Adaptive Research
Adaptive Research is pleased to announce the immediate release of the CAESIM 2024 simulation platform, providing advanced computational fluid dynamics modeling with multi-physics capabilities. The new software release provides new tools and capabilities that optimize the modeling process and provide the CFD engineer with fast simulation solutions.Starting Price: $1295/annual standard -
41
Simufact Additive
Hexagon
Simufact Additive is a powerful and scalable software solution for the simulation of metal-based additive manufacturing processes. Discover how to use Simufact Additives to optimize your metal 3D printing / rapid prototyping. Simufact Additive helps you to significantly reduce the number of test prints. Our goal is to provide you with a software solution which helps you produce AM components with repeatable dimensional accuracy first time right. Simufact Additive´s multi-scale approach combines the best approaches in a unique software solution - from an extremely fast mechanical method to a full thermal-mechanical coupled transient analysis with the highest accuracy of simulation results. You can choose the right simulation method for your situation. Simufact Additive is a specialised software solution dedicated exclusively to the simulation of additive manufacturing processes. For the user, this is reflected in a lean operating concept. -
42
Stripe Sigma
Stripe
We built Stripe Sigma to help businesses quickly analyze their Stripe data and to enable teams to get faster business insights. Use predefined SQL queries or write new custom queries right inside the Stripe dashboard, no data engineering is required. With structured access to your data, you can easily identify which customers are least likely to churn, which geographies contribute the most revenue, and more. Get answers to all your Stripe-related questions when you need them. Reports can be scheduled and automatically generated on a daily, weekly, or monthly basis. Move faster by saving frequently-run queries. Share queries with other teams directly in Sigma or download them as CSV reports. Business teams use Stripe Sigma to run their company more efficiently. Finance teams use Stripe Sigma to close the books faster. Data teams use Stripe Sigma to analyze everything from ARPU to churn. Product management uses Stripe Sigma to find new business opportunities.Starting Price: $10 per month -
43
MuSES
ThermoAnalytics
Electro-optic and infrared renderings in MuSES achieve global benchmark accuracy through a stepwise workflow – beginning with heat sources such as engines, exhaust, bearings, and electronics, followed by an in-band diffuse radiosity solution. Then place your sensor at range and render multi-bounce, spectrally-summed radiance values, with DeltaT-RSS contrast metrics. Sensor response curve handy? Import it and see what you’ve been missing. With MuSES, you have reality at your fingertips. Because MuSES covers physics all the way back to heat sources and environmental loads, you can manage thermal signature contrast and evaluate control kits for low observable design in any global location. Heat shields, cooling schemes, and even camo surface treatments can be tested and evaluated for in-band radiance, replete with atmospheric attenuation along sensor line-of-sight. Triage and prioritize your engineering with MuSES early in the development cycle. -
44
Aibuild
Aibuild
Aibuild is an advanced additive manufacturing (AM) software platform that integrates AI-driven automation, hybrid manufacturing, and real-time monitoring to streamline industrial 3D printing processes. It supports a range of AM technologies, including polymer extrusion, metal DED, WAAM, concrete, and paste extrusion, compatible with both robotic and gantry systems. It combines additive and subtractive manufacturing within a single interface, offering CNC milling capabilities such as drilling, engraving, and contouring. Aibuild's AI assistant autonomously generates ready-to-print toolpaths, while its smart toolpathing adapts to complex geometries, optimizing bead dimensions and thermal behavior for improved print quality. It provides in-process monitoring using RGB and IR cameras to detect defects, ensuring quality assurance through thermal simulations and adaptive infill strategies. -
45
Energy2D
The Concord Consortium
Based on computational physics, Energy2D is an interactive multiphysics simulation program that models all three modes of heat transfer, conduction, convection, and radiation, and their coupling with particle dynamics. Energy2D runs quickly on most computers and eliminates the switches among preprocessors, solvers, and postprocessors typically needed to perform computational fluid dynamics simulations. It allows you to design "computational experiments" to test a scientific hypothesis or solve an engineering problem without resorting to complex mathematics. Work is also underway to incorporate other types of energy transformations and support multiple types of fluids. The conduction part of Energy2D is highly accurate, but the convection and radiation parts are not 100% accurate. Hence, in cases that involve convection and radiation, Energy2D results should be considered qualitative. More than 40 scientific papers have used Energy2D as a research tool.Starting Price: Free -
46
SigmaXL
SigmaXL
SigmaXL was designed from the ground up to be a cost-effective, powerful, but easy to use tool that enables users to measure, analyze, improve and control their service, transactional, and manufacturing processes. As an add-in to the already familiar Microsoft Excel, SigmaXL is ideal for Lean Six Sigma training or use in a college statistics course. Version 9 adds Time Series Forecasting and advanced control charts. Click here to view the features available in SigmaXL! Automatic removal of extreme VIF or collinear terms (with alias and removal report) Specify interactions, quadratic and higher orders (all interactions or up to 3-Way). ANOVA Type I and/or Type III Sum-of-Squares with Pareto of Percent Contribution and Standardized Effects. Lenth Pseudo Standard Error for Saturated Models (Orthogonal or Non-Orthogonal) with Monte Carlo or Student T P-Values. White robust standard errors for non-constant variance (Heteroskedasticity-Consistent).Starting Price: $249.00/one-time/user -
47
Sigma
Sigma Computing
Sigma is a modern business intelligence (BI) and analytics application built for the cloud. Trusted by data-first companies, Sigma provides live access to cloud data warehouses using an intuitive spreadsheet interface empowering business experts to ask more of their data without writing a single line of code. With the full power of SQL, the cloud, and a familiar interface, business users have the freedom to analyze data in real time without limits. Sigma is self-service analytics as it was meant to be. -
48
Celsius PowerDC
Cadence Design Systems
To ensure you achieve reliable power delivery, Cadence Celsius PowerDC technology provides efficient DC analysis for signoff of IC package and PCB designs, including electrical/thermal co-simulation, to maximize accuracy. Celsius PowerDC technology quickly pinpoints excessive IR drop, with areas of excess current density and thermal hotspots, to minimize your design’s risk of field failure. Highly accurate, even for complex designs with multiple voltage domains and complex plane structures, providing conclusive IR drop analysis for package and board. Automatically set up DC simulations using PowerTree Technology data (source/sink definitions) captured at the schematic stage of the design process. Comprehensive support for multi-structure designs, including stacked die, multiple boards, and all popular package types. -
49
SigmaMRP
SigmaTEK Systems
Developed specifically to meet the needs of the manufacturing industry, SigmaMRP integrates directly with the SigmaTEK suite and your other business systems. Manage critical business data, inventory, transactions, customers, suppliers, job status, all from one location. SigmaMRP provides one source to track all jobs for your customers right from quotation, through manufacturing right through to delivery and invoicing. No duplicate data entry and no more lost documents, just one complete audit trail that builds customer trust and eliminates confusion. SigmaMRP fully tracks costs, sales prices, and margins, giving a full overview of profitability at-a-glance. Plus jobs are tracked throughout the process, giving an instant status report of any order within your business. A programmable scripting engine offers custom cost formulas for any operation in any level of an assembly to get the exact desired price. -
50
ExacTrac Dynamic
Brainlab
ExacTrac Dynamic unifies the power and precision of cutting-edge tracking technologies. Deliver high-precision treatments for a wide range of patient positioning and monitoring workflows including cranial and prostate. This all-in-one system’s revolutionary new thermal-surface camera technology works in tandem with real-time X-Ray tracking for extraordinary accuracy. The 4D Thermal Camera creates a highly accurate and reliable hybrid thermal surface by correlating the patient’s heat signature to their reconstructed 3D surface structure. To achieve this, 300,000 3D surface points are acquired and matched to the heat signal generated by the thermal camera, creating another dimension to track their position.
