| Name | Modified | Size | Downloads / Week |
|---|---|---|---|
| Parent folder | |||
| README.rst | 2016-12-02 | 616 Bytes | |
| KoboRoot.tgz | 2016-12-02 | 5.3 MB | |
| KoboRoot.tgz.md5sum | 2016-12-02 | 47 Bytes | |
| Totals: 3 Items | 5.3 MB | 0 | |
===== Launcher and GrblCtrl ======
This transfers your E-Reader into a Display and Control-Panel for your Grbl-based CNC mill. All you need to do is connecting it either directly via TTL serial port or via Bluetooth (HC-05 Modules on each side, Master @ Arduino, Slave @ Kobo ).
- Update procedure:
switch your Kobo on
connect USB cable
- copy
KoboRoot.tgz
into the .kobo Subdirectory on the Kobo USB-storage
safely "remove USB Hardware" on your PC
unplug the USB cable
reboot the Kobo, During installation the Led will flash alternating red and green.