DSLstats Files

Three files are provided:

- dslstats32L-3.9.tar.gz  Linux 32-bit version
- dslstats64L-3.9.tar.gz  Linux 64-bit version
- dslstats32W-3.9.zip     Windows 32-bit version

Changes since v3.82:
- fixed issues with very high incorrect values of CRC and FEC being reported in some circumstances
- improved the handling of implausible traffic values with some routers
- corrected the malfunctioning reset buttons for traffic monitoring
- added a barchart of errored seconds per hour
- added a button to take immediate snapshots of all active graphs
- added option to take auto snapshots at different rate from time per page
- separated snapshot configuration from graph configuration to reduce clutter

Changes since v3.7:
- fixed "xxxx is not a valid integer" issue
- improved the way in which FECs and CRCs are recorded and graphed
- fixed bug which resulted in reported average error rates increasing when closing down
    and restarting program
- improved the consistency of the traffic monitoring data under various conditions
- made some corrections to the traffic monitoring setup for some routers
- added option to reverse the RX/TX values for traffic monitoring (appears to be necessary 
    with some modem/routers, such as HG622)
- traffic monitoring data is autosaved every 10 minutes
- added option to show maximum monthly allowance on traffic monitoring monthly graph
- added option to monitor attenuation values on VDSL2 connections
- corrected issue whereby the traffic monitoring chart didn't respond to colour changes
- fixed display malfunction on Connection speed graph when scrolling back to a paused section
- QLN and HLog graphs (if enabled) are now refreshed after a resync
- the IP address is now always refreshed after a resync