CaIS System Files

 This is Comission module for CaIS Palet Pro(cessing) - manipulation module .
* Version 1.0 TouchScreen mode for PosiFLEX POS Terminal *
** Local SERIAL PORT usage via Gambas (cais.cpf - [14]param Y/N) ***
*** Dual serial port support via Linux script level (use RAMDisk-files)

   CaIS(R)-System Software
   Copyright (C) 1997-2022  <by Josef Nagy>

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3 of the License, or
   (at your option) any later version.
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
   You should have received a copy of the GNU General Public License
   along with this program; if not, write to :
   Free Software Foundation, Inc.
   59 Temple Place, Suite 330, 
   Boston, MA  02111-1307  USA.
   
   Contact to author <Josef Nagy> :
   cais@gmx.com
   http://caisys.no-ip.org
   
------------------------------------------------
Special PosiFLEX additional installation Step's:
------------------------------------------------
- copy readSerial.sh to local RAMDisk directory
  $ mkdir /home/...user.../RAMDisk
  $ cp readSerial.sh /home/...user.../RAMDisk/
- Add user Permission to ttyS0-S3 (4 serial port) at OS_Startup
  $suco cp ../../serialOK /etc/init.d/serialOK
  $sudo chmod 777 /etc/init.d/serialOK
  $cd /etc/init.d
  $sudo update-rc.d serialOK defaults
- Make MEMORY RAMDisk filesystem (size=10MB)
  $ sudo nano /etc/fstab
  ... insert this line to botton of file :
  tmpfs     /mnt/RAMDisk    tmpfs  nodev,nosuid,size=10M 0       0
  ...
  [F2]+Y to SAVE
  $sudo reboot
- Add OnBoard (TouchKeyboard) AutoStart
  1. System settings -> Assistive Technology -> Prefered Application ->
     Accessibility[Tab] -> Mobility(OnBoard):Run at startup=ON
     
     
==========================================================================     
   
Base by : EXPTerminal 2.2.108
-----------------------------
   
- 'cais.cpf' :
;------Parameters Notes [14] -----
;[1] -MV1 host service TCP/IP         /LPM,LPM_PosiFLEX,WineRave2
;[2] -MV1 host service port           /LPM,LPM_PosiFLEX,WineRave2
;[3] -GPU FullScreen Support ON/OFF   /LPM,LPM_PosiFLEX
;[4] -ZPL printout ON/OFF             /LPM,LPM_PosiFLEX
;[5] -MV1/MV2 host UCI                /LPM,LPM_PosiFLEX,WineRave2
;[6] -USER authentication ?           /LPM,LPM_PosiFLEX
;[7] -Test label ?                    /LPM,LPM_PosiFLEX
;[8] -FTP syncronisation              /LPM,LPM_PosiFLEX
;[9] -Images(JPG) directory           /LPM,LPM_PosiFLEX
;[10]-Language tag (by CaIS FORM)     /WineRave2
;[11]-Rave tamplate directory         /WineRave2
;[12]-ESBRaveviewer.exe dir.          /WineRave2
;[13]-If output:PDF dir.              /WineRave2
;[14]-SerialPort in Gambas ?          /EXPTerminal
- If [14]-param (SerialGambas) = "N" then Switch OFF Gambas SerialPort driver !
;[15]-PDA - Mode parameter Y/N        /EXPTerminal


Ver 1.0.built_  (23.DEC.2021)
-------------------------------
- FMain Form redesigned

Ver 1.0.built_12  (26.DEC.2021)
-------------------------------
- PALETPRO routine defined
- Clean unused variables,call's

Ver 1.0.built_16  (27.DEC.2021)
-------------------------------
- Maniputation Area Manage :
    [PLT:] Pxxxxxxxx
      1. Save PALET data's to ^PALETB & ^PALETB1 with user timestamp
      2. Copy PALET data's to ^PALETMT & ^PALETMT1(cummulative) globals
      3. Delete PALET data's from ^PALET global = INACTIVE palet
    [PLT:] +Pxxxxxxxx
      1. Restore PALET data's from ^PALETMT & PALETB = DEACTIVATE palet
      2. Delete from ^PALETMT & ^PALETMT1 (clear from Manipulation Area)
   
  *** This functions safe with Network LOCK for multiuser actions !!

- Manipulation Area Inventory State by Article_code show in [ListView1]

Ver 1.0.built_25  (27.DEC.2021)
-------------------------------
- F1 & F2  List implemented
- F7 = Generate NEW Palet_ID (PNxxxxxxxx | ^PALETN global)

Ver 1.0.built_34  (28.DEC.2021)
-------------------------------
- F7 + Box_BarCode (0....... ) detected
    1. move to ^MTEMPPL(TCPIP,brc)=brc^plt^MT
    2. remove from ^PALETMT/^PALETMT1/^PALETMT2
- ListView2 showing method implemented
- At RESTART application (Init^PALETPRO):
    1. checking ^MTEMPPL(TCPIP,brc)=....
    2. Back Roll from ^MTEMPPL to ^PALETMT/^PALETMT1/^PALETMT2
    3. clear ^MTEMPPL

Ver 1.0.built_45  (28.DEC.2021)
-------------------------------
- F5 Enabled & Implemented (BOXes version)
  New PNxxxxxxxx SET to Database
  ^PALET/^PALET01
  ^MTEMPPL(TCPIP,...  cleared

Ver 1.0.built_62  (29.DEC.2021)
-------------------------------
- [COD] selection implemented
     - List All -Boxes/item
     - Auto detect LOT/GDT/LDT
- Some minor bug correction:
     - same BRC reading : EXIST error mesage !
     - If Palet make empty , then delete HEAD node (^PALETMT(MT,PLT))
     - When EXIT-App , scale-timer 'go away' CRASH message