Activity for UltraDefrag
-
Dec created ticket #238
Says complete ,but when I run again, says 18% un-defrag
-
Sakura3814 posted a comment on discussion Open Discussion
Where can i download v8.0.1 v9.0.1 v10.0.0 Version ?
-
Piotr Biesiada posted a comment on discussion Open Discussion
I don't know why, but when the disk is bigger, the longer UD is thinking. He scans the volume and then is a minute pause while nobody knows what UD is thinking about. For 8 TB drive there is one minute of pause, for smaller disks less. In modern computers UD shouldn't be taking that long time to analyse or compute the defragmentation effects. Something is wrong. This shouldn't be that way.
-
Jamil modified a comment on discussion Help
Thanks for posting, but this won't work. The issue was not UltraDefrag at all. It was Microsoft and another Windows 10 update issue. This is confirmed. I now can no longer update Windows 10 to the latest version due to this issue. What happened was my Windows 10 performed an automatic update without me even knowing it the same time I performed a boot defrag. I have since disabled all updates to Windows 10. When one does this, Microsoft silently and secretly forces "safe" updates to your computer...
-
Thanks for posting, but this won't work. The issue was not UltraDefrag at all. It was Microsoft and another Windows 10 update issue. This is confirmed. I now can no longer update Windows 10 to the latest version due to this issue. What happened was my Windows 10 performed an automatic update without me even knowing it the same time I performed a boot defrag. I have since disabled all updates to Windows 10. When one does this, Microsoft silent and secretly forces "safe" updates to your computer after...
-
Jon Peicky posted a comment on discussion Help
You might as well try fixing it in command prompt You can refer to this post to learn how to get into command prompt out of Windows how to boot into command prompt
-
funkytwig posted a comment on discussion Translations
Can someone please delete this thread, i posted in wrong place.
-
..To get best perfomance. does it matter whitch I do first. Whitch is likely to give me the best gane. Ime using V9. Or does Full Optimisation also defrag (i.e. I should only do this).
-
..To get best perfomance. does it matter whitch I do first. Whitcxh is likely to give me the best gane. Ime using V9.
-
Stefan Pendl modified ticket #48
Constant volume dirty on boot even if drive is not dirty. Windows XP
-
Edward Sutton posted a comment on a blog post
Does a purchase of 8.0+ only go to Green Gate Systems or does it still help go toward the GPL project? Is Dimitri involved with Green Gate Systems or at least get something from the purchases? Will development continue on the GPL version from main developers? Are outside contributions still considered that could make it into future releases?
-
I was thinking of searching for trim capability but https://docs.microsoft.com/en-us/previous-versions/windows/desktop/stormgmt/msft-physicaldisk has MediaType which may be relevant. Not sure what is available before Windows 8 and would definitely prefer an override be possible as there are reasons flash media can benefit from defragmentation. This is likely also relevant on bug#89.
-
It seems Microsoft made some changes to the boot code that now fails for me. They did this mid-March, and they are continuing this trend for the April update. This one also fails for me. If I am lucky, they will fix this by the May update.
-
Dmitri Arkhangelski posted a comment on discussion Help
Hello Jamil, Thank you for sharing your experience, we'll do our best to investigate the case and correct our software, if it needs any corrections, of course. Otherwise, let's hope Microsoft will fix the issue on their side. Best regards, Dmitri P.S.: I've no idea why your Android phone is doing funny things, I think the best way to deal with it is to check Google for possible explanation.
-
Prior to my initial image restore above, I also tried to perform an in-place update of the latest Windows 10 update including the problematic Cumulative Update release in mid March 2020. This failed and Auto Repair managed to undo the damage. After the image restore above, I tried again to perform a Windows update to the latest version. After reboot, my workstation again failed to startup and Auto Repair could not fix the issue this time. I had to restore the image yet again via Macrium (it ran much...
-
Prior to my initial image restore above, I also tried to perform an in-place update of the latest Windows 10 update including the problematic Cumulative Update release in mid March 2020. This failed and Auto Repair managed to undo the damage. After the image restore above, I tried again to perform a Windows update to the latest version. After reboot, my workstation again failed to startup and Auto Repair could not fix the issue this time. I have to restore the image yet again followed by disabling...
-
I finally got Windows 10 operational again on my workstation just minutes ago after running an UltraDefrag boot defrag. It seemed to run as expected until it completed. Once it completed, it rebooted followed by a Windows 10 automatic repair screen showing. I tried every option that I could to repair Windows 10 startup, but all attempts failed. One of the options was to check my drive for errors warning that it would run for over an hour. I allowed it to perform this check. Once it completed, I saw...
-
I finally got Windows 10 operational again on my workstation just minutes ago after running an UltraDefrag boot defrag. It seemed to run as expected until it completed. Once it completed, it rebooted followed by a Windows 10 automatic repair screen showing. I tried every option that I could to repair Windows 10 startup, but all attempts failed. One of the options was to check my drive for errors warning that it would run for over an hour. I allowed it to perform this check. Once it completed, I saw...
-
When my computer was unusable, I attempted to post to the forum with Android phone. For some weird reason, pressing space on Andriod reults in double characters appearing on the screen. Not sure if it's a Chrome bug on Android, but it didn't work here for some strange reaso.
-
I finally got Windows 10 operation again on my workstation just minutes ago after running an UltraDefrag boot defrag. It seemed to run as expected until it completed. Once it completed, it rebooted followed by a Windows 10 automatic repair screen showing. I tried every option that I could to repair Windows 10 startup, but all attempts failed. One of the options was to check my drive for errors warning that it would run for over an hour. I allowed it to perform this check. Once it completed, I saw...
-
I finally got Windows 10 operation again on my workstation just minutes ago after running an UltraDefrag boot defrag. It seemed to run as expected until it completed. Once it completed, it rebooted followed by a Windows 10 automatic repair screen showing. I tried every option that I could to repair Windows 10 startup, but all attempts failed. One of the options was to check my drive for errors warning that it would run for over an hour. I allowed it to perform this check. Once it completed, I saw...
-
SpaceBarIsNotWorkingOnMyPhoneWithForumIwillCleanUpThisPostAfterWindows10Reset
-
-
UltraDefrag 7.1.4 has been released
-
UltraDefrag released /stable-release/7.1.4/ultradefrag-7.1.4.src.7z
-
-
-
-
-
-
-
-
-
-
[RELEASE] 7.1.4
-
cleanup
-
code signing added
-
upgrade notification reimplemented
-
I am noticing in the latest version that a folder gets created on my C: drive: C:\UltraDefrag_Logs It's empty and probably left over from debugging purposes. I notice this after a boot defrag.
-
I am noticing in the latest version that a folder gets created on my C: drive: C:\UltraDefrag_Logs It's empty and probably left over from debugging purposes.
-
Thanks for further explanation, that's definitely an interesting idea. On Wed, Nov 6, 2019 at 3:16 PM snarfle snarfle@users.sourceforge.net wrote: I see you went right for the "adventurous" option. It's certainly the more interesting idea. I'm not sure I understand your objection to it though. If you are deleting pagefile/hiberfil/swapfile in BootExecute, you know that you're going to have room to re-create them. I mean it's not like someone else is going to swoop in and grab that space. And having...
-
snarfle posted a comment on discussion Open Discussion
I see you went right for the "adventurous" option. It's certainly the more interesting idea. I'm not sure I understand your objection to it though. If you are deleting pagefile/hiberfil/swapfile in BootExecute, you know that you're going to have room to re-create them. I mean it's not like someone else is going to swoop in and grab that space. And having them out of the way is surely going to make it easier to defragment the rest of the files. As for finding a large enough contiguous location, why...
-
Hello, Thank you for your suggestions. The main problem seems to be that when you delete the paging, swap and hibernation files you have to recreate them somehow afterwards. The simplest way is to use Windows API, but unless you have a single large free space gap on the disk the chances are the files will be fragmented after recreation. Also it would be possible to modify internal structures of the file system to place the files exactly where we would like to have them, but that's not safe at all....
-
Looking here, you seem to have the same problem defragging pagefiles that I do. In short: even at boot time, certain files (notably including pagefile.sys) are already locked by the system. But I think there's a trivial-yet-safe way around that. However, since one man's "brilliant idea" is another man's "I already tried that and it ended badly," I thought I'd run the idea past you. You've been doing this a long time and I expect you'll have some insight to share. In short, I'm suggesting that in...
-
Thank you for feedback! вс, 27 окт. 2019 г., 18:54 Jamil dryst@users.sourceforge.net: I have used every available defragmentation tool currently available today. UltraDefrag version 9.0.1 is currently the best available as far as features, capability and flexibility. No other product even comes close to what you have achieved. Congratulations for a job well done! Congratulations On Version 9.0.1 https://sourceforge.net/p/ultradefrag/discussion/709672/thread/71232c48b0/?limit=250#1b9d Sent from sourceforge.net...
-
I have used every available defragmentation tool currently available today. UltraDefrag version 9.0.1 is currently the best available as far as features, capability and flexibility. No other product even comes close to what you have achieved. Congratulations for a job well done!
-
EDIT: below is my revised and complete PowerShell script that includes all functionality I require; added a couple more processes that prevent scheduled defrag; fixed conditions. I am posting this update if anyone else wishes to use this: # # UltraDefragScheduledLaunch.ps1 # $vmware = Get-Process vmware -ErrorAction SilentlyContinue $divx = Get-Process DivXConverter -ErrorAction SilentlyContinue $macrium = Get-Process reflectbin -ErrorAction SilentlyContinue $ultradefrag = Get-Process ultradefrag...
-
EDIT: below is my revised and complete PowerShell script that includes all functionality I require. I am posting this update if anyone else wishes to use this: # # UltraDefragScheduledLaunch.ps1 # $vmware = Get-Process vmware -ErrorAction SilentlyContinue $divx = Get-Process DivXConverter -ErrorAction SilentlyContinue $macrium = Get-Process reflectbin -ErrorAction SilentlyContinue $weekday = Get-Date -UFormat "%A" [int]$hour = Get-Date -UFormat "%H" [int]$dayofmonth = Get-Date -UFormat "%d" if ($vmware...
-
EDIT: below is my revised and complete PowerShell script that includes all functionality I require. I am posting this update if anyone else wishes to use this: # # UltraDefragScheduledLaunch.ps1 # $vmware = Get-Process vmware -ErrorAction SilentlyContinue $divx = Get-Process DivXConverter -ErrorAction SilentlyContinue $macrium = Get-Process reflectbin -ErrorAction SilentlyContinue $weekday = Get-Date -UFormat "%A" $hour = Get-Date -UFormat "%H" $dayofmonth = Get-Date -UFormat "%d" if ($vmware -eq...
-
EDIT: below is my revised and complete PowerShell script that includes all functionality I require. I am posting this update if anyone else wishes to use this: # # UltraDefragScheduledLaunch.ps1 # $vmware = Get-Process vmware -ErrorAction SilentlyContinue $divx = Get-Process DivXConverter -ErrorAction SilentlyContinue $macrium = Get-Process reflectbin -ErrorAction SilentlyContinue $weekday = Get-Date -UFormat "%A" $hour = Get-Date -UFormat "%H" $dayofmonth = Get-Date -UFormat "%d" if ($vmware -eq...
-
EDIT: below is my revised and complete PowerShell script that includes all functionality I require. I am posting this update if anyone else wishes to use this: # # UltraDefragScheduledLaunch.ps1 # $vmware = Get-Process vmware -ErrorAction SilentlyContinue $divx = Get-Process DivXConverter -ErrorAction SilentlyContinue $macrium = Get-Process reflectbin -ErrorAction SilentlyContinue $weekday = Get-Date -UFormat "%A" $hour = Get-Date -UFormat "%H" $dayofmonth = Get-Date -UFormat "%d" if ($vmware -eq...
-
I got this to work using PowerShell under the latest Windows 10 Professional. The script was rather simple: # # UltraDefragScheduledLaunch.ps1 # $vmware = Get-Process vmware -ErrorAction SilentlyContinue $divx = Get-Process DivXConverter -ErrorAction SilentlyContinue $weekday = Get-Date -UFormat "%A" $hour = Get-Date -UFormat "%H" if ($vmware -eq $null -and $divx -eq $null) { if (($weekday -eq "Friday" -and $hour -le 21) -or ($weekday -eq "Saturday" -and $hour -gt 7) -or ($weekday -ine "Friday" -and...
-
Thanks for the response. It looks like I can schedule PowerShell scripts to execute that have the ability to check for running processes as well as date/time checks combined. When all conditions are met, I could then launch UltraDefrag. I will experiment with this. This looks to be one way to go about this without too much work.
-
Hello, As far as I know it is impossible to adjust scheduled tasks so they won't get executed if some other processes are running, so you probably have to write a special program which will run in background and check whether the processes are running or not, for instance, every second. Then, if it detects the processes are running it might stop the defragmentation using the schtasks command and maybe reschedule it using the same command afterwards. Best regards, Dmitri
-
I upgraded to 9.0.0 enterprise recently, and it has been working great with no issues so far. I am currently using this as my only defrag tool, and I have some questions related to scheduling. I want to create a quick defrag script that gets executed during idle times. Creating the script itself is no issue for me, but the scheduling portion of it I have specific requirements. For my workstation, I generally leave it powered on 24/7. It is scheduled to execute lots of tasks. I know that Windows Task...
-
I upgraded to 9.0.0 enterprise recently, and it has been working great with no issues so far. I am currently using this as my only defrag tool, and I have some questions related to scheduling. I want to create a quick defrag script that gets executed during idle times. Creating the script itself is no issue for me, but the scheduling portion of it I have specific requirements. For my workstation, I generally leave it powered on 24/7. It is scheduled to execute lots of tasks. I know that Windows Task...
-
I upgraded to 9.0.0 enterprise recently, and it has been working great with no issues so far. I am currently using this as my only defrag tool, and I have some questions related to scheduling. I want to create a quick defrag script that gets executed during idle times. Creating the script itself is no issue for me, but the scheduling portion of it I have specific requirements. For my workstation, I generally leave it powered on 24/7. It is scheduled to execute lots of tasks. I know that Windows Task...
-
Mac posted a comment on discussion Open Discussion
Does this ticket go somewheres Marvelous Marv
-
UltraDefrag 7.1.3 has been released
-
cleanup
-
[RELEASE] 7.1.3
-
-
-
-
-
-
-
-
-
-
cleanup
-
installation simplified
-
cleanup
-
Daniele posted a comment on discussion Help
Thak you so much! This will help a lot
-
Hello, UltraDefrag build instructions can be found at: https://ultradefrag.net/handbook/v7/Development.html Best regards, Dmitri
-
Sorry to resurrect this old discussion but I'm very interested in trying to build UltraDefrag by myself. Can I, please, ask you to send me a copy of those instructions? I'm trying to understand how to write programs with the native api and I have found your library (ZenWINX), but I'm really struggling to put everything toghether. Especially when it comes to properly setup an IDE/compiler to build this things. Thank you in advance for any help.
-
By the way, this is Windows 10 Profession version 1903. I run hardware RAID10, and the RAID controller hides RAID from the operating system. There are no specific drivers that I must install, because they are bundled with Windows. This is a 1GB caching RAID controller. I run UEFI, and I always defrag my C: partition only. My C: currently has 1.46TB used with 3.49TB free. When I wrote about VMWare, this is VMWare Workstation only I have installed. I also run a few operating systems as VMs and use...
-
By the way, this is Windows 10 Profession version 1903. I run hardware RAID10, and the RAID controller hides RAID from the operating system. There are no specific drivers that I must install, because they are bundled with Windows. This is a 1GB caching RAID controller. I run UEFI, and I always defrag my C: partition only. My C: currently has 1.46TB used with 3.49TB free. When I wroter about VMWare, this is VMWare Workstation only I have installed. I also run a few operating systems as VMs and use...
-
With UltraDefrag 8, I would sporadically encounter boot failures after defrag execution. This happened with both boot-time defrag and also a GUI defrag while Windows was still running. I would see a boot failure after the defrag fully completed then I rebooted the computer. It was very sporadic, so I never bothered to report this issue. I am very good at keeping recent full system clone backups of my workstation, so I did not really lose anything after a full restore. Yesterday after installing 8.0.1,...
-
UltraDefrag 7.1.2 and 8.0.1 have been released
-
UltraDefrag 7.1.2 and 8.0.1 have been released
-
UltraDefrag 7.1.2 and 8.0.1 have been released
-
UltraDefrag 7.1.2 and 8.0.1 have been released
-
-
-
-
-
-
-
-
-
-
[RELEASE] 7.1.2
-
copyright updated
-
compatibility with HiDPI displays improved