After updating to ver 2.7, it wouldn't show the current adapter settings. If I used Tools > Pull from adapter, the adapter IP settings would also be blank as well (it is currently set to a static IP)
If I switched back to 2.6, these showed up correctly.
Windows 10 Ver 1607 (OS Build 14393.321), Realtek PCIe GBE Family network card
Are you connected to a device or network when trying this?
This is a side-effect of the way I am getting the IP information - it can't read from an adapter that is disconnected. I am working on a solution to this for the next version.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
After updating to ver 2.7, it wouldn't show the current adapter settings. If I used Tools > Pull from adapter, the adapter IP settings would also be blank as well (it is currently set to a static IP)
If I switched back to 2.6, these showed up correctly.
Windows 10 Ver 1607 (OS Build 14393.321), Realtek PCIe GBE Family network card
(https://www.dropbox.com/s/ooyiljcgnabc8cu/SimpleIPConfig.jpg?dl=0)
Are you connected to a device or network when trying this?
This is a side-effect of the way I am getting the IP information - it can't read from an adapter that is disconnected. I am working on a solution to this for the next version.
This should be fixed in the latest beta 2.8 b1.