Hi Giancarlo! I saw you opened an Issue on GitHub, thank you, it was the correct thing to do: https://github.com/DarwinNE/FidoCadJ/issues/220#issuecomment-1807190256
Hi, when I double click a .fcd file on Finder (Mac Osx) FidoCadJ correctly opens, but it doesn't load the .fcd file I just clicked. I have to do File => Open and select the file. Info: FidoCadJ version: 0.24.8 Mac OS version: 14.1.1 (Sonoma) Do you have any solution? Thanks and best regards, Giancarlo
Hello. Make sure you use a Java version greater or equal than 9. IIRC Java does not update automatically above version 8, so you may probably have a Java version 8 that is up to date but that is not enough to make FidoCadJ 0.24.8 version run. Hope it helps!
Hi ! II use the 24.7 version and it run fine but I tryed to install the new version 24.8 and I have a problem : It install with the "msi" file but when i try tu use the exe file, I have the message "Java Virtual Machine Launcher / A Java Exception has occured". I am with Windows 10 and my Java is up to date. What is the problem ? Thanks.
It's Java 8 Update 381 (JRE) on my computer.
Hi Fernando. What is your operating system?
Hello good morning, my name Fernando and i'm from Portugal, i have a lite issue, when I try to install the software, it gaves me the information that I don't have Java installed in my computer, I already install the last version but even so it gaves me the same problem, what shell I do? Thanks
I WOULD LIKE TO PARTICIPATE
Subject: Invitation to collaborate in Usability Survey Dear Users, Our names are Chun Tuarez Víctor Elian, Zambrano Aquino Cristopher Stiven and Guaranga Otavalo Ebert Steeven. I have started a course project with the title: "Adoption of the Organization of help according to use cases Technique in the Open-Source Software Development Process" at the State Technical University of Quevedo. When working with Open Source Software, you have probably noticed that some applications are not easy, fast and...
Subject: Invitation to collaborate in Usability Survey Dear Users, Our names are Chun Tuarez Víctor Elian, Zambrano Aquino Cristopher Stiven and Guaranga Otavalo Ebert Steeven. I have started a course project with the title: "Adoption of the Organization of help according to use cases Technique in the Open-Source Software Development Process" at the State Technical University of Quevedo. When working with Open Source Software, you have probably noticed that some applications are not easy, fast and...
Subject: Invitation to collaborate in Usability Survey Dear Users, Our names are Chun Tuarez Víctor Elian, Zambrano Aquino Cristopher Stiven and Guaranga Otavalo Ebert Steeven. I have started a course project with the title: "Adoption of the Organization of help according to use cases Technique in the Open-Source Software Development Process" at the State Technical University of Quevedo. When working with Open Source Software, you have probably noticed that some applications are not easy, fast and...
Invitation to users Dear Users. We are a development team made up of Víctor Chun, Ebert Guaranga, Cristopher Zambrano. We have started a course project with the title. "Adoption of the Help Organization Technique According to Use Case in the Open-Source Software Development Process" at the State Technical University of Quevedo. Therefore, we require your collaboration. Next, we kindly ask you to go to the following link, download the FidoCadJ OSS project and have a little navigation in it. FidoCadJ...
Buongiorno! Credo sia semplicemente un problema legato alla versione di Java che è troppo vecchia. Per ragioni credo legate al cambiamento di licenza e politica di Oracle, gli aggiornamenti più o meno automatici si fermano alla versione Java 8. FidoCadJ richiede almeno Java 9, ma consiglierei comunque di installare una versione più recente. Ho personalmente usato Java 14 per sviluppare l'ultima versione con macOS High Sierra e FidoCadJ funziona perfettamente. Consiglierei di installare Java 15, che...
Ciao a tutti. In una recente reinstallazione di Fidocadj sul mio MacOS ho incontrato un errore analogo a quello del post precedente. Per investigare l'errore ho provato a lanciare il software da riga di comando : java -jar fidocadj.jar ottenendo il seguente errore: Error: A JNI error has occurred, please check your installation and try again Exception in thread "main" java.lang.UnsupportedClassVersionError: net/sourceforge/fidocadj/FidoMain has been compiled by a more recent version of the Java Runtime...
Ciao, il problema è molto probabilmente questo qui: https://github.com/DarwinNE/FidoCadJ/issues/198#issuecomment-667701650 Purtroppo MacOS mostra un messaggio di errore molto fuorviante. Fammi sapere, D.
Ciao Davide ho scaricato l'ultima versione la 0.24.8 sul Macbook con Java ( vedi gli screenshot) va non si apre. Sbaglio qualcosa ? Ciao Grazie
Hi Luigi, I saw it, that's perfect, thank you! Cheers, D.
I opened a request just now. Regards, Luigi
Hi Luigi, that's one of the major news of version 0.24.8, indeed. In this version, you can not disable this behavior, though. You may open a request for it there: https://github.com/DarwinNE/FidoCadJ/issues However, I noticed in the past the configuration options for the program that are saved in files tend to create a certain deal of confusion in many users. I'll have to think about it. Cheers, D.
Ciao Davide, ho installato l'ultima versione (15) del JDK, poi FidoCadJ 0.24.8, funziona. Grazie della dritta! Saluti, Luigi
Hi Davide, I have installed the new version of FidoCadJ (0.24.8) with success. I noted that if a text contains the underscore char, the following text is shown as a subscript. similarly, if a text contains the caret char ("^"), the following text is shown as a superscript. This is nice if wanted, but it may be annoying if you want to display just the underscore and caret chars. To do so a backslash char "\" must be inserted before the underscore or caret; in this case, however, if you copy-and-paste...
No problem! I'm glad you were able to solve the issue. It's a very common problem, indeed. Cheers, D.
Hi Davide - sorry for the late response. After some searching I found a JSE V13 download site. I fell into the trap of believing the Oracle standard "general public" downloader message that V8 / Update 261 really is current... I really appreciate FidoCadJ - superb, small and efficient - ideal for small to medium size projects...
Hello, FidoCadJ requires at least Java 9. You must install a more recent version, 8 is not enough. While I am writing those lines, the last version is Java 14 and it is the version I used to develop version 0.27.8, it should work just fine. Cheers, D.
Hi Davide - same effect here. OS is W10 64B and Java just updated to jre-8u261 today, nothing newer available for Windows. Error message: is "A JNI error has occurred, please check your installation and try again"
Hello, what operating system are you using? Cheers, D.
i had installed the program of fidocadj successfully, when I try to open it, it appears a window that ask me to instaled java. then, i did it, it works. but, when i try to open the fidocadj application again, it also says, error a jne error
Ciao Luigi, credo che la soluzione più semplice sia di installare un JDK versione 14 (è l'ultima versione disponibile al momento in cui scrivo). Un buon posto da cui partire per trovare il download dovrebbe essere qui: https://www.oracle.com/java/technologies/javase-downloads.html Dimmi se funziona! Cordialità, D.
Ciao Davide, vorrei provare la nuova versione di FidoCADJ per Windows, 0.24.8, ma noto che il requisito minimo èJava 9. Il problema è che la versione più recente del Java Runtime Environment disponibile sul sito ufficiale: https://www.java.com/it/download/ è la 8 Update 261. Dove trovo la versione 9? Ciao, Luigi
Hello, an issue was opened on GitHub about this issue: https://github.com/DarwinNE/FidoCadJ/issues/198 Regards, D.
Hello Axel, No, unfortunately it is not possible to run FidoCadJ 0.24.8 with Java 1.8. If version 0.24.7 is slow with Linux, try to hide the grid, it seems that it is the culprit in the vast majority of situations. There is a button under the toolbar that toggles grid visibility, that may help. More information here about the slowness of FidoCadJ on Linux: https://github.com/DarwinNE/FidoCadJ/issues/166 Kind regards, D.
Is there a way to compile/run under Java 1.8 32-bit ? There are no 32 bit Linux JDK builds since 1.9 V0.24.7 is veery slow...
Is there a way to compile/run under Java 1.8 32-bit ? Threre are no 32 bit Linux JDK builds since 1.9
Is there a way to compile/run under Java 1.8 32-bit ? Threre is no 32 bit Linux JDK builds since 1.9
Is there a way to compile/run under Java 1.8 32-bit ? Threre is no 32 bit Linux builds since 1.9
Hi Alessandro, great move! Indeed, compiling from sources is an easy task. Cheers, D.
Unfortunately I had no luck disabling Gatekeeper. Anyway I cloned the repo from GitHub, compiled and ran (make && make run) and it worked like a charm! Best Regards, Alessandro
Hi Alessandro, it seems that it is a misleading message from new operating systems. I tried to download the file (from GitHub) and it works fine on my computer (High Sierra). Here is an article describing what happens, but you can find others: https://macreports.com/app-is-damaged-and-cant-be-opened-you-should-move-it-to-the-trash-fix/ Cheers, D.
Hello, and many thanks for your amazing project! I'm not able to launch FidoCadJ 0.24.8 (just downloaded) on macOS 10.15 (Catalina). When I launch the app I obtain the following message: Usually I save an exception for a specific app by "CTRL+click" -> "Open" on it and then "Open" again, but this does not work in this case. Any ideas?
Ciao Loris, hai impostato correttamente la directory in cui FidoCadJ cerca le librerie? Si trova nella configurazione del programma, devi scegliere un posto comodo per te e metter lì dentro le librerie che ti interessano. Fammi sapere, D.
Ciao Davide Non riesco a vedere in Fido tutte librerie che ho nella directory ho provato anche con aggiorna ma niente. Loris
Hi Ernesto! Nice to know FidoCadJ works. Concerning the strange characters, it's an issue with the handling of UTF-8 in the ResourceBundle class, provided by Java. I could patch this behaviour many years ago, but maybe my patch does not work in your particular setup. I don't have a solution as I should be able to replicate the problem (and everything works for me). If you want to run FidoCadJ with the English interface (that does not show UTF-8 characters), you can type: java -jar fidocadj.jar -l...
Thank you Davide It works when I change the property "Allow this file to run as program". I take this opportunity to ask you another question Why do the tildes appear bad? Thankfully, Ernesto.
Hello, is Java correctly installed on your computer? Are you able to run other Java programs? Which error is given, exactly? Kind regards, D.
Hello! I just downloaded FidoCadj to test it on a computer with Kubuntu Eoan Ermine. I have the fidocadj.jar file but I can't get it to work. If I right-click - open with OpenJDK JAVA 11 runtime it gives me an error and if I open a console in the download folder and type java -jar fidocadJ.jar, I also get an error. What am I doing wrong? Thank you!
Hi, thank you for the remark. Can someone please fill an Issue on Github summarizing all this? Cheers, D.
The problem can be solved by putting the magnification at values like 220, 130, 80 avoiding values like 133, 321, 76 etc. Do not use units but round the values to tens. It would be nice if it could be fixed in the "options" menu
Ciao, ci vuole un ambiente Java installato su Mac, in gergo ci vuole quello che si chiama un JRE (Java Runtime Environment). Qui dovrebbe essere un buon punto di partenza per installarne uno: https://www.java.com/fr/download/help/mac_install.xml Non c'è una versione demo di FidoCadJ, il programma è completo ed è totalmente gratuito, non richiede nessuna registrazione e nessuno store. Cordialità D.
Salve ho un mac con sistema operativo Mojave aggiornato all' ultima versione. Provato a caricare la versione demo di Fidocad , Non parte ,Messaggio di "Unable to load Java Runtime Environment." cosa posso fare ? grazie
Don't mind: I copy/pasted your request there: https://github.com/DarwinNE/FidoCadJ/issues/162
Hi, the main feature request/bug tracker is now on GitHub: https://github.com/DarwinNE/FidoCadJ/issues Can you please copy/paste your request there? Kind regards, D.
Export text with special characters (svg/pgf)
Perfetto! Concordo sul fatto di esportare solo i Layer selezionati. Se troppo complesso puoi esportare tutti i layer e sara' lo script di OpenSCAD a "selezionare" gli SVG da estrudere e processare. Facci sapere quando hai a disposizione un jar su qui fare i primi test. Grazie per l'impegno. Buona serata, Pier Andrea.
Ciao, ho iniziato a lavorare alla possibilità di esportare un disegno in diversi file vettoriali separando i layer diversi (issue #154 su GitHub). Per adesso c'è ancora qualcosa da rivedere e da testare, ma direi che la cosa è fattibilissima. Cosa faccio con i layer vuoti? Mi parrebbe logico non generare nessun file, adesso il programma ne genera comunque uno (con i buchi delle piazzole bianche). A presto, D.
Concordo con te, Davide. io renderei disponibile su FidoCADJ solo l'esportazione della sequenza dei layer selezionati (nel formato che ritieni piu' opportuno, incluso l'SVG, ovviamente). Per il resto si possono fare dei tutorial con degli script di importazione a OpenSCAD. L'esportazione dei layer puo' essere utilizzata anche per altri scopi oltre che per la stampa 3D! Per il tipo di lavoro che faccio io basterebbero due piccoli improvements che farebbero la differenza: 1) i due pulsanti HIDE/SHOW...
L'idea (che mi sembra fattibile in questo caso) è di aggiungere solo lo stretto indispensabile. Nell'interfaccia di FidoCadJ punto sempre ad un certo minimalismo. Da un lato, mi semplifica il lavoro. Da un altro rende il risultato più pulito e facile da comprendere per chi si approccia al programma. Per esempio, perché separare i layer solo con l'esportazione SVG? Non si potrebbe fare con qualunque formato vettoriale (compreso il PDF)? Lo script OpenSCAD dev'essere generato da FidoCadJ? In questo...
Ciao Enrico, concordo con te. Davide e' stato bravissimo a nascondere la complessita' del suo lavoro "dentro le librerie" e rendere l'esperienza utente davvero semplice ed una curva di apprendimento rapidissima. Sarebbe un peccato inserire aspetti di complessita' non richiesti (vedi il mio primo post). A me personalmente interesserebbe l'esportazione dell'intera serie degli SVG (quelli settati come visibili), poi sarei in grado di creare degli script per la ricostruzione tridimensionale. A questo...
Cari amici, grazie per lo sforzo che state compiendo per aggiornare fidocadj a ''nuove frontiere''.Come utente (diversamente giovane) di fidocadj e poco addetto ai menandri della programmazione, vi pregherei di una cosa: rendete le eventuali nuove funzioni intellegibili anche ai non addetti. Grazie per il vostro impegno, un caro saluto, Enrico ======================= www.heinrichfleck.net Da: "noreply@sourceforge.net" <noreply@sourceforge.net> A: 997486@discussion.fidocadj.p.re.sourceforge.net Inviato:...
Grazie Davide, non ti preoccupare, ti capisco benissimo. Ci sentiamo piu' avanti. Saluti, PA
Molto interessante, non dovrebbe essere difficile da fare e non si discosta dalla filosofia di FidoCadJ che rimane sempre legata al 2D. Nelle prossime settimane non ho tantissimo tempo libero, purtroppo, ma forse verso metà maggio proverò a fare qualcosa. Ho visto la issue su GitHub, è perfetta.
Ciao Davide, ho fatto alcune prove preliminari di esportazione SVG ed importazione OpenSCAD ed il sistema sembra funzionare anche se bisogna "pensarla bene" sfruttando la strutturazione a layer di FidoCADJ. Ho creato un file con FidoCADJ inserendo un solo componente (LCC 28 PIN). Ho esportato il fle in SVG come lcc28.svg nella directory di OpenSCAD. Ho lanciato lo script seguente su OpenSCAD: linear_extrude(height = 1) { scale(0.1) import("lcc28.svg"); } Su FidoCADJ ho poi disattivato il lato rame...
Ho separato i pin dal corpo dell'IC e ho riscostruito l'IC in 3D col seguente script di OpenSCAD. color("red") linear_extrude(height = 1) { scale(0.1) import("ic-pins.svg"); } color("blue") linear_extrude(height = 1.5) { scale(0.1) import("ic-body.svg"); } Scusa per i colori ma e' solo perche' il nero non constrastava abbastanza. Estrudendo le piste di 0.5 (su un altro layer) si potrebbero riportare anche gli eventuali collegamenti... PA
Ciao! Quello che posso pensare di fare è aggiungere un'esportazione verso uno script OpenSCAD (che verrebbe generato automaticamente), per esempio ottenendo una figura 2D avente un certo spessore uniforme, ma parametrizzabile in qualche modo (per esempio una variabile nello script). Però FidoCadJ lavora solo con elementi 2D e non posso andare molto oltre. Non è difficile aggiungere dei formati di esportazione vettoriale, ovviamente una volta che si conosce bene il formato verso cui si vuole andare....
Ciao Davide, ho inserito il commento/proposta su GitHub. Io lavoro spesso con OpenSCAD (che ti consiglio di provare se non lo hai gia' fatto) e spesso mi capita di "estrudere" SVG (generati di solito con Inkscape) per creare dei solidi . Mi e' venuto automatico pensare al tuo Fidocad per maneggevolezza, compattezza e sopratutto per la geniale gestione delle librerie che ha superato la iniziale divisione presenste in FidoCad. Io non limiterei la tua intuizione alla semplice creazione dei PCB, va ben...
Nel caso fosse utile, informazioni aggiuntive sulle dimensioni dei disegno esportate (dimensioni orizzontali e verticali in pixel) sono fornite a partire versione 0.27.8 alpha, scaricabile già oggi da GitHub: https://github.com/DarwinNE/FidoCadJ/releases
Ciao Pier Andrea, grazie per i suggerimenti e per i graditi complimenti! L'idea di semplificare la gestione dei layer esiste da un po', ma non ho ancora trovato il tempo di lavorarci sopra: https://github.com/DarwinNE/FidoCadJ/issues/24 Mi piace l'idea dei due comandi che proponi. Sarebbe possibile scrivere due righe in GitHub sotto la Issue di cui sopra? Ciò permetterebbe di mostrare che c'è sempre interesse per il programma. Per quanto riguarda la stampa 3D, ho una stampante 3D ed ovviamente ci...
Ciao Davide, ho ripreso da poco un mio progetto per cui mi serviva un software per creare PCB e sono passato per la solita trafila rispolverando vecchie conoscenze di gioventu' (Eagle, Diptrace etc). Le curva di ri-apprendimento e' lenta per software professionali che si sono arricchiti di tanti fronzoli ed hanno perso il concetto di produttivita' per un maker del fine settimana. Finalmente mi sono ricordato di FidoCad e della nuove versione FidoCadJ che ho ripreso ed ho generato il primo PCB stampabile...
Non sono sicuro di capire la domanda. Se usi un file vettoriale, le dimensioni sono rispettate, basta mantenere un fattore di scala uguale ad 1.0. Se invece usi un file bitmap, quello che conta sono i punti per pollice (DPI) e devi regolarli perché siano uguali alla risoluzione di cui hai bisogno (per esempio, per stampare). Servono altre informazioni?
Come fare esportazione del disegno nella stessa grandezza di compilazione su un file di W. Grazie Giulio.
Hi, that's great, thanks! However, the main development is done on GitHub, now: https://github.com/DarwinNE/FidoCadJ Do you think you can open a pull request there? Regards, D.
Hi, Greek translation to v0.24.7
Ciao Vincenzo, purtroppo è un peccato che Lorenzo Lutti abbia lasciato perdere lo sviluppo di FidoCAD per Windows dal 2001. Per quanto riguarda FidoCadJ, quando ho tempo e voglia, come dici tu, mi metto al computer e faccio qualcosa. Penso però che la grande differenza di FidoCadJ rispetto a tool come l'ottimo KiCAD (che ti consiglio caldamente di provare) è la facilità di scambio dei disegni nei forum e nei gruppi di discussione. Non credo che il futuro vada verso lo sviluppo dei PCB perché, appunto,...
Vedi non ho niente contro chi cerca di fare qualcosa di utile, tutt'altro, ma detto questo credo che il programma dovrebbe avere sempre sottomano, la piazzolla rotonda, quella rettangolare, la linea da tracciare, ecc, Poi sempre a vista dovrebbero esserci le piazzolle per gli integrati a 10 o 20-30 piedini, condensatori, elettrolitici e ceramici, diodi e resistenze, il resto se serve si va a cercare, Non siamo cosi esperti (perlomeno io) da creare circuiti stampati tipo schede madri di computer,...
La soluzione migliore comunque è di salvare altrove e certamente non in "C:\Program Files\".
Hi again, if it can be useful, I just tested FidoCadJ by connecting myself to a Linux Centos distant machine by SSH and by redirecting X11 via SSH. I have a X11 server on my Mac laptop so the graphical rendering is done on my computer by X11, inside a MacOS window. FidoCadJ runs very smoothly on the remote machine even in this configuration. Cheers, D.
Hi again, if it can be useful, I just tested FidoCadJ by connecting myself to a Linux Centos distant machine by SSH and by redirecting X11 via SSH. I have a X11 server on my MacOSX laptop. FidoCadJ runs very smoothly on the remote machine even in this configuration. Cheers, D.
Hi, if FidoCadJ is too slow on Linux, that is not normal at all. I tested it on many different machines and the performances were quite good even on very old hardware. However, it happened in the past that on some particular Linux installs, there are some performance issues. Unfortunately, this has been reported to me (I remember some discussions in Italian language elsewhere), but I never had such a problem myself. I am supposing you are running version 0.24.7 that is the most recent stable version...
New download on Kubuntu, running JDK JRE 8, slow doesn't seem to work properly
More details: Most programs, if I left click to place a symbol, start a line, etc., then a right click will stop the symbol, end the line, and so on, but FC doesn't on my machine. If I draw something and zoom in with "FIT" and then try to zoom back out, my drawing disappears Response is extremely slow. I am told that JDK 8 is backwards compatible w/ JDK 6, so it shouldn't be a version problem. If I open a terminal window, Java shows properly, so I'm not sure what is going on. Suggestions welcome,...
Jumps for crossing wires
Abilita come amministratore l'eseguibile......tasto destro del mouse sull'eseguibile, sulla scheda compatibilita' selezionare la voce Amministratore.
Ciao, gli accessi sono tutti abilitati. "C:\Program Files\" è il path che appare in automatico in fase di installazione ma anche cambiandolo, sia manualmente che selezionandolo dall'albero, l'errore permane. Saluti A.
Hi again John, by the way, I was thinking that you may be find interesting to have a look to those libraries if you have not done that yet: http://darwinne.github.io/FidoCadJ/libs.html 73
Ciao, sembrerebbe che ci sia un problema di permessi di qualche genere. Purtroppo, non conosco Windows abbastanza per essere preciso (l'ultima versione di Windows che ho usato seriamente è stata Windows 2000), ma sembrerebbe che FidoCadJ non sia autorizzato a scrivere dove tu vorresti. Del resto, da quel poco che mi ricordo, "C:\Program Files\" non mi sembra il posto adatto per salvare un disegno. Credo tu debba cambiare i permessi a livello del sistema operativo, ma putroppo non ti so dire di più....
Salve, ho installato il programma senza problemi, anche su vari pc, ma in fase di salvataggio restituisce il seguente errore: "Errore durante il savataggio: java.ioFileNotFoundException: C:\Program Files\prova.fcd (Accesso negato) utulizzando qualsiasi percorso; il salvataggio funziona solo se effettuato sul Desktop. Saluti
Hi John, yes, that is the idea! 73
The ability of grouping things is often found in vector drawing softwares. In FidoCadJ this does not exist directly, but you can create new library symbols as you wish. (There is a short tutorial on that on the English manual). By a certain point of view, the creation of a new symbol can be seen as a very "strong" version of the grouping technique. I currently do not know if it is worth to implement a weaker grouping more similar to the usual one. NB: the most recent manual in English refers to version...
Thanks! That's probably an even better approach, as I can then use the symbols in other designs! John - WA2FZW
Great, Luigi. Let us continue there. Cheers, D.
The ability of grouping things is often found in vector drawing softwares. In FidoCadJ this does not exist directly, but you can create new library symbols as you wish. (There is a short tutorial on that on the English manual). By a certain point of view, the creation of a new symbol can be seen as a very "strong" version of the grouping technique. I currently do not know if it is wort to implement a weaker grouping more similar to the usual one. NB: the most recent manual in English refers to version...
Just a suggestion for a FioCADj improvement. I was creating a symbol for Arduino type headers this morning, and found that I had to recreate each one individualy. It would have been so much easier to have been able to select the rectangle and associated lines and to have been able to group them into a single entity, which could then be manipulated as a single component. Along the same lines, once one has created such a component, is there a way to add it to a user created library?
Fatto, aggiunta segnalazione Ciao, Luigi
Ciao Luigi, non importa per la discussione sbagliata. La lista dei bug è tenuta ora su GitHub: https://github.com/DarwinNE/FidoCadJ/issues Riusciresti ad aprire una nuova Issue descrivendo il problema che incontri (in inglese)? Dovrei avere tutte le informazioni per replicare esattamente il bug partendo da una versione appena scaricata di FidoCadJ 0.24.7. Se non riesco a replicare il problema, sicuramente non riuscirò a correggerlo. Fammi sapere, D.
Ciao Davide, nella versione 0.24.7 (Java) quando aggiungo uno o più componenti ad una libreria aggiuntiva che ho creato io, a volte sovrascrive alcuni componenti già esistenti. Me ne sono accorto in quanto prima di modificarla faccio una copia di backup della libreria, e poi confronto la copia con il file aggiornato.