DragonOS Activity
Brought to you by:
cemaxecuter
Activity for DragonOS
-
Eric Creech modified a comment on discussion General Discussion
Hello! I have attempted install three times. Two doeloads of the ISO and on two differnt USb sticks. All attempts end up stuck at 'Retrieving file 1 of 3' . i will attempt to add pictures. I though maybe I was expecting too much and left it run ivernight. No luck. Machine in an HP with an I5 2.4 and 16 gig RAM. 1TB ssd.
-
Hello! I have attempted install three times. Two doeloads of the ISO and on two differnt USb sticks. All attempts end up stuck at 'Retrieving file 1 of 3' . i will attempt to add pictures. I though maybe I was expecting too much and left it run ivernight. No luck. Machine in an HP with an I5 2.4 and 16 gig RAM. 1TB ssd.
-
Cemaxecuter posted a comment on ticket #76
I’ve actually installed the other way around, so it’s possible the mx boot menu would need to be manually altered. When you boot into mx Linux can you see the noble partition? Sent from Proton Mail for iOS. -------- Original Message -------- On Wednesday, 01/21/26 at 06:17 Jeffrey Mallinson oldfarmer@users.sourceforge.net wrote: [tickets:#76] Dragon Nobel doesn't create a boot loader Status: open Milestone: 1.0 Created: Wed Jan 21, 2026 11:17 AM UTC by Jeffrey Mallinson Last Updated: Wed Jan 21,...
-
Tijs Bastiaansen posted a comment on discussion General Discussion
One of the users of DragonOS asked me where the name dragonOS is coming from. I couldn't answer him. So maybe can. He suggested to name it HamLinuxOS. or something like that.
-
raspberry Pi imager and Arduino IDE
-
Jeffrey Mallinson created ticket #76
Dragon Nobel doesn't create a boot loader
-
DragonOS updated /README.txt
-
-
-
-
Thank you for the note. I just custom built it and loaded it to the noble ppa. Assuming you are running the latest DragonOS Noble you should be able to run sudo apt update and sudo apt install jtdx. Note that this is the standard jtdx and not the improved version. I’m not sure what people prefer these days. You can also grab the deb here and manually install, https://github.com/alphafox02/noble_ppa Sent from Proton Mail for iOS. -------- Original Message -------- On Saturday, 12/20/25 at 11:42 Tijs...
-
R7
-
Jtdx
-
Looks like you’re right, that’s odd.. I thought I got it all in there. I’ll look into this and get it all added if possible. I talked about it here and then apparently didn’t finish. I have to see why, probably just an oversight. https://youtu.be/nFN_F1GA_5A?si=klvcbKH6nGUfcY9s Sent from Proton Mail for iOS. -------- Original Message -------- On Saturday, 11/29/25 at 17:29 Hugo Casal hugocasal1963@users.sourceforge.net wrote: Hello I have installed version 24.04 (Noble) of Dragon OS on my laptop,...
-
Hugo Casal posted a comment on discussion General Discussion
Hello I have installed version 24.04 (Noble) of Dragon OS on my laptop, but I cannot find the Signal Server (GUI) program in any directory. I read that it came pre-installed, but apparently that is not the case. How can I install it? thanks
-
Scott Oakland posted a comment on discussion General Discussion
I installed DragonOS and got it working on my Intel Mac Mini using the USB Flash Drive installation. How can I get my WiFi working? Thanks. Scott, N1IA
-
William Hast posted a comment on discussion General Discussion
That was my next plan. Will try to do it later tonight. On Tue, Nov 11, 2025 at 3:54 PM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: Okay, so the same hash. Can you burn the iso to a separate usb stick with etcher just to compare. I really do like ventoy, just want to check and see if there’s any difference. Sent from Proton Mail for iOS. -------- Original Message -------- On Tuesday, 11/11/25 at 15:18 William Hast kp4djt51@users.sourceforge.net wrote: I did a sha256 check and both checksums...
-
Okay, so the same hash. Can you burn the iso to a separate usb stick with etcher just to compare. I really do like ventoy, just want to check and see if there’s any difference. Sent from Proton Mail for iOS. -------- Original Message -------- On Tuesday, 11/11/25 at 15:18 William Hast kp4djt51@users.sourceforge.net wrote: I did a sha256 check and both checksums are the same (the one for the download and the checksum file) On Tue, Nov 11, 2025 at 1:21 PM William Hast kp4djt51@users.sourceforge.net...
-
I did a sha256 check and both checksums are the same (the one for the download and the checksum file) On Tue, Nov 11, 2025 at 1:21 PM William Hast kp4djt51@users.sourceforge.net wrote: I am trying to load DragonOS Noble. But when I try to boot it off of the stick I get Error invalid magic number Error you need to load the kernel first The machine is a Thinkpad X201 I am using a jump drive with Ventoy on it. I have other ISO's on it they all boot Any ideas?" -- Chuck -- KP4DJT AREDN Meshphone # 405.2005...
-
Here is what I got: kp4djt@FW16-kp4djt:~/iso$ sha256sum DragonOS_Noble_R7.iso 8680dff4565c0d3e6b297295dd8f57ed1ffe28dcaef99d27adfb3e98eaf93d10 DragonOS_Noble_R7.iso kp4djt@FW16-kp4djt:~/iso$ cat DragonOS_Noble_R7.iso.sha256 8680dff4565c0d3e6b297295dd8f57ed1ffe28dcaef99d27adfb3e98eaf93d10 DragonOS_Noble_R7.iso Looks the same between the result and the sha256 file. On Tue, Nov 11, 2025 at 1:39 PM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: William, I would double check the sha256 provided...
-
William, I would double check the sha256 provided on SF against your download. It sounds like a case of a possible bad download. Sent from Proton Mail for iOS. -------- Original Message -------- On Tuesday, 11/11/25 at 14:21 William Hast kp4djt51@users.sourceforge.net wrote: I am trying to load DragonOS Noble. But when I try to boot it off of the stick I get Error invalid magic number Error you need to load the kernel first The machine is a Thinkpad X201 I am using a jump drive with Ventoy on it....
-
I am trying to load DragonOS Noble. But when I try to boot it off of the stick I get Error invalid magic number Error you need to load the kernel first The machine is a Thinkpad X201 I am using a jump drive with Ventoy on it. I have other ISO's on it they all boot Any ideas?" -- Chuck -- KP4DJT AREDN Meshphone # 405.2005 and 405.2013 HamHotline # 11259 DMR ID 3140958
-
Jason Nagy posted a comment on discussion General Discussion
Ok, I'm losing my mind. The EPC is up and running, the ENB is up and running. I see the EPC received the S1 Setup Request with the parameters. The EPC Sends the S1 Setup Response, but the ENB never sends the S1 setup complete. I have the firewall open for all local traffic, I've confirmed configs on both files. Nothing I do helps. HELP!!!
-
Matt Trask posted a comment on discussion General Discussion
Thanks for the quick response. AFAIK there nothing else virtual running on this system, it is a fresh install of Lubuntu/Dragon and adding Oracle VirtualBox is the first thing I've added. Haven't even run most of the other stuff with SDR yet that I ran on my previous Dell laptop. Running your commands gave this result for both of them: Failed to stop libvirtd.service: Unit libvirtd.service not loaded.
-
Welcome! If I had to guess, perhaps there’s a hyper-v running on your Linux install. Can you try the following sudo systemctl stop libvirtd Sudo systemctl stop virtlogd Trying to think what else it could be. Sent from Proton Mail for iOS. -------- Original Message -------- On Friday, 11/07/25 at 14:12 Matt Trask mattstert@users.sourceforge.net wrote: @cemaxecutor I understand that DragonOS runs in Virtual Machines, I use it on my main MacBook Pro with VMWare Fusion. But my question is the reverse...
-
@cemaxecutor I understand that DragonOS runs in Virtual Machines, I use it on my main MacBook Pro with VMWare Fusion. But my question is the reverse - I'm running DragonOS on an older Mac AirBook (it runs just fine of course) and want to use Oracle VirtualBox to run Windows 10 for those pesky radio utilities (CPS, I'm lookin' at you) that don't run anywhere else. It installs fine, but when I try to run the Windows VM after installing it the error message says that another hypervisor is running. Any...
-
A cat of /etc/os-release can help but problem is I didn’t factor for when I need LTS release comes out which overwrites my entry. If it’s Noble R7 or above you’ll find that in the /etc/apt/ are you’ll find it’s got an entry to my github PPA that’ll allow you to pull in updates I put together. You have a good point though, something I need to better address. Sent from Proton Mail for iOS. -------- Original Message -------- On Thursday, 10/30/25 at 04:24 NDXsW ndxsw@users.sourceforge.net wrote: lsb_release...
-
NDXsW posted a comment on discussion General Discussion
lsb_release -a Distributor ID: Ubuntu Description: Ubuntu 24.04.3 LTS Release: 24.04 Codename: noble uname -a Linux dragonos 6.14.0-28-generic #28~24.04.1-Ubuntu SMP PREEMPT_DYNAMIC Fri Jul 25 10:47:01 UTC 2 x86_64 x86_64 x86_64 GNU/Linux does DragonOS have a cmdln tool that returns what Rx version we have installed? not sure what R ver i have currently.
-
Eric Davanture posted a comment on discussion General Discussion
FWIW, I think my answer also works for https://answers.launchpad.net/ubuntu/+question/819983 :-)
-
Greetings, Thanks for your answer. Much appreciated. Yes, HP ZBook 17 G1 is the generation just before the G2 but it is quite similar. That said, I just found the answer and it stands in the BIOS. You have to go to BIOS: Advanced -> Boot Options -> Boot Mode and select "UEFI Native (Without CSM) " instead of "Legacy". If you select "Legacy", then DragonOS will never boot once installed on the HDD of the ZBook. I hope this helps for anyone using DragonOS on this kind of laptop.
-
I'm having a look here, assuming the G1 is even older? https://answers.launchpad.net/ubuntu/+question/819983
-
Hey Mykhaylo, sorry not keeping up on here. I would say best to focus on any RF links that may be in use. I imagine the RTL-SDR wouldn't cover too much, unless there's usage under 1.5Ghz or so. Best bet may be the NanoVNA. Try and see if you can get ahold of a HackRF. For anything else, try and reach me via the site.
-
Greetings, I downloaded a few days ago DragonOS Noble R7 iso and created an USB key that boots correctly. I then installed DragonOS on the hard drive (ssd) of the (bare-metal) computer (HP ZBook 17 G1) without any problem. After successful installation of DragonOS, when rebooting after removing the USB key, no Operating System is found on the hard disk of the computer so I suspect that DragonOS did not prepare correctly the hard disk. Any clue ? Any help will be greatly appreciated. Thanks a lot...
-
Mykhaylo posted a comment on a wiki page
Thanks for literally almost everything and your time and effort. I must have been sleeping not to come across this before now. I am from Ukraine, you know that we have a war with Russia - a terrorist country. Every day our defenders - our guys die precisely from the large number of drones that Iran and China supply to Russia. I am an amateur in RTL-SDR. I bought a Raspberry PI 5, installed DragonOS, bought RTL-SDR v4, NanoVNA. Please tell me, step by step, or what I should read to make a device for...
-
Joseph Reith posted a comment on ticket #74
Odd but this time in a fresh VM the installer launched on the second attempt to execute. Not sure why I had an issue the other day but seems to be working now. On Thu, Oct 2, 2025, 10:09 PM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: Thanks! I also need to take a look again at Fissure and go down the list of what it wants to try install outside the core vs what’s already in DragonOS. Even the core can cause issues if it tries to replace the GNU Radio version and such. Sent from Proton Mail...
-
Thanks! I also need to take a look again at Fissure and go down the list of what it wants to try install outside the core vs what’s already in DragonOS. Even the core can cause issues if it tries to replace the GNU Radio version and such. Sent from Proton Mail for iOS On Thu, Oct 2, 2025 at 10:07 PM, Joseph Reith <joereith@users.sourceforge.net> wrote: I am updating the FISSURE installer to include an entry for Noble and was testing on your newest release, I am going to be reinstalling and testing...
-
I am updating the FISSURE installer to include an entry for Noble and was testing on your newest release, I am going to be reinstalling and testing again in the morning, I will let you know how it goes. On Thu, Oct 2, 2025, 2:27 PM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: That’s interesting. I have seen it where the first time you double click it doesn’t start but the very next time you do it brings it up. I’ll take a closer look. If you get another opportunity on the same computer and...
-
That’s interesting. I have seen it where the first time you double click it doesn’t start but the very next time you do it brings it up. I’ll take a closer look. If you get another opportunity on the same computer and could try it again with booting and starting it twice be curious to see if it works for you. Sent from Proton Mail for iOS On Thu, Oct 2, 2025 at 11:04 AM, Joseph Reith <joereith@users.sourceforge.net> wrote: [tickets:#74] Installer bug Status: open Milestone: 1.0 Labels: Bug Created:...
-
Installer bug
-
Dan modified a comment on discussion General Discussion
-
Nee to linux and DragonOS . I can't figure out how to install the tools within VMware. Between 2 different AI basically saying the same command lines that dont work , it just seems now that im going around in cicles with their help. Along with trying the instructions provided on the VMware website I still cant get tools it installed . So VMware no longer comes with the tools built in and have to get it separately . When I click install tools with VMware guest, a popup tells me that “Click Install...
-
Nee to linux and DragonOS . I can't figure out how to install the tools within VMware. Between 2 different AI basically saying the same command lines that dont work , it just seems now that im going around in cicles with their help. Along with trying the instructions provided on the VMware website I still cant get tools it installed . So VMware no longer comes with the tools built in and have to get it separately . When I click install tools with VMware guest, a popup tells me that “Click Install...
-
Nee to linux and DragonOS . I can't figure out how to install the tools within VMware. Between 2 different AI basically saying the same command lines that dont work , it just seems now that im going around in cicles with their help. Along with trying the instructions provided on the VMware website I still cant get tools it installed . So VMware no longer comes with the tools built in and have to get it separately . When I click install tools with VMware guest, a popup tells me that “Click Install...
-
Andy Lawendel modified a comment on discussion General Discussion
I've created a dual boot machine with W11, what do you suggest to tome from R5 to R7, should I format the DragonO partition before installing R7? I don't like the idea of having both R5 and R7 Sorry for these dumb questions! A.
-
I've created a dua boot machine with W11, what do you suggest to tome from R5 to R7, should I format the DragonO partition before installing R7? I don't like the idea of having both R5 and R7 Sorry for these dumb questions! A.
-
Thank you, so it's possible to simply rebuild SDR++ to fix that... A.
-
Oh, gosh, thank you, I assumed it was the previous version... Now I see your repo again it must be R5, forgive me! So I have to overwrite everything with R7... Andy
-
This was identified and fixed in R7. Although you’re making me think more - I don’t think I updated an R6? Sent from Proton Mail for iOS On Tue, Sep 2, 2025 at 11:24 AM, Andy Lawendel <lawendel@users.sourceforge.net> wrote: [tickets:#73] satdump-ui crashes at launch in Noble R6 Status: open Milestone: 1.0 Labels: #satdump #crashes Created: Tue Sep 02, 2025 03:24 PM UTC by Andy Lawendel Last Updated: Tue Sep 02, 2025 03:24 PM UTC Owner: Cemaxecuter Hi! I have DragonOS Noble R6, but cannot get along...
-
Hi, I'm interested in a few SDR++ plugins which are quite complex to build from source and/or are missing a compatible .so binary. I'm thinking about three <cropinghigh" plugins (sdrpp-tetra-demodulator, sdrpp-vhfvoiceradio and sdrpp-inmarsat-demodulator) and the sdrpp-radiosonde decoder plugin by dbdexter-dev on Github. So far, I managed to add only tetra-demodulator to SDR++ included in Noble R6. Instructions to build cropinghigh plugins are too complex for me, would it make sense having a "deluxe"...
-
Unfortunately not that I’ve documented - in R7 I added a PPA capability so that some updates can be pushed out via a private PPA. On your R6 build SatDump can be fixed - I’ll look back at my notes. There was a cmake flag I had left off which caused the failure where it’s looking in the wrong place. Sent from Proton Mail for iOS On Tue, Sep 2, 2025 at 11:29 AM, Andy Lawendel <lawendel@users.sourceforge.net> wrote: Hi! I'm currently on DragonOs Noble R6 and I've made a number of changes I'd like to...
-
Hi! I'm currently on DragonOs Noble R6 and I've made a number of changes I'd like to preserve (f.i. new modules in SDR++, things like that). Is there a practical way to move to R7 or greater without having to erase my customization?
-
satdump-ui crashes at launch in Noble R6
-
Noble is 24.04 based and the latest. FocalX (confusing name) is 22.04 based and older but does have a few applications not yet in Noble. The older Focal was 20.04 based. Sent from Proton Mail for iOS On Tue, Aug 26, 2025 at 2:51 PM, Jahari Lewis <akprowl@users.sourceforge.net> wrote: What is the difference? Why were they made? DragonOS Noble vs Focal Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dragonos-focal/discussion/general/ To unsubscribe from further...
-
Jahari Lewis posted a comment on discussion General Discussion
What is the difference? Why were they made?
-
-
-
-
Unfortunately I do not have scripts. I do entering manually and maintain a long running host machine that I do all changes on. This results in a system that has a mixture of apt and source packages and combos that are not standard as I attempt to test each application and ensure it works together. So for example, bladerf drivers are kept up to date from source along with firmware and images on the OS and in turn various applications such as a special build of GR-osmocom is used. While this process...
-
J H posted a comment on discussion General Discussion
I love Dragon OS and I certainly appreciate all the effort that went into creating it, but I highly prefer to run it on my native Ubuntu. Is there a possibility of sharing the scripts that were used to install the packages so I can create a full Ubuntu version?
-
Scott Martin posted a comment on discussion General Discussion
Hi Cemaxecuter, What I ended up doing was setting up a dual boot with DragonOS_FocalX_R37.1 Thanks for the link to the fork, I will try it out and see what happens in DragonOS_Noble_R5. For now, R37.1 allows me to use QSpectrumAnalyzer and soapy_power until I can find an alternative tool in Noble_R5. Cheers.
-
You can try this fork which is at-least only 2 years old vs 8, but would need to build/install and test. https://github.com/dirkcgrunwald/soapy_power/commits/master/ Sent from Proton Mail for iOS On Thu, Jul 10, 2025 at 7:59 PM, Scott Martin <sapperton@users.sourceforge.net> wrote: Hi Cemaxecuter, So close to getting this back to where I was. When I execute, ~$ soapy_power -f 470.0M:608.0M -B 50.0k -n 19200 -d driver=rtlsdr -r 2000000.0 -w 2000000.0 -p 0 -g 18.0 -k 25 -F rtl_power_fftw --even --fft-window...
-
It’s more likely the python code you’re using and is not properly referencing Soapy as it should. You shouldn’t have to move soapysdr. I tested this not long ago. Simple soapy and soapy power you’re using is like 8 years old and just not updated to work correctly with newer python and/or soapy. Sent from Proton Mail for iOS On Thu, Jul 10, 2025 at 7:59 PM, Scott Martin <sapperton@users.sourceforge.net> wrote: Hi Cemaxecuter, So close to getting this back to where I was. When I execute, ~$ soapy_power...
-
Hi Cemaxecuter, I used build DragonOS_Noble_R5. Downloaded from SourceForge. Cheers.
-
Can you point to the repo you’re using? - if it’s the one I’m thinking of it may just be very old. Sent from Proton Mail for iOS On Fri, Jul 11, 2025 at 2:14 PM, Scott Martin <sapperton@users.sourceforge.net> wrote: Hi Cemaxecuter, I also booted up with the Live usb and checked with - ~$ SoapySDRUtil --info Same output as my last post, so pretty sure installing rtl-power-fftw didn't mess up anything. Searched around on the web, someone just copied the SoapySDR folder into the path that python was...
-
Hi Cemaxecuter, I also booted up with the Live usb and checked with - ~$ SoapySDRUtil --info Same output as my last post, so pretty sure installing rtl-power-fftw didn't mess up anything. Searched around on the web, someone just copied the SoapySDR folder into the path that python was looking for. Not sure if that would break future updates (probably). Is the fix as simple as adding this: ? export PYTHONPATH=$PYTHONPATH:/usr/local/lib/SoapySDR Or am I going to have to create a symlink? Not sure how...
-
Hi Cemaxecuter, Did some searching. ~$ SoapySDRUtil --info Soapy SDR -- the SDR abstraction library Lib Version: v0.8.1-4build1 API Version: v0.8.0 ABI Version: v0.8 Install root: /usr Search path: /usr/lib/x86_64-linux-gnu/SoapySDR/modules0.8 Search path: /usr/local/lib/x86_64-linux-gnu/SoapySDR/modules0.8 (missing) Search path: /usr/local/lib/SoapySDR/modules0.8 Module found: /usr/lib/x86_64-linux-gnu/SoapySDR/modules0.8/libRedPitaya.so (0.1.1) Module found: /usr/lib/x86_64-linux-gnu/SoapySDR/modules0.8/libairspySupport.so...
-
Hi Cemaxecuter, So close to getting this back to where I was. When I execute, ~$ soapy_power -f 470.0M:608.0M -B 50.0k -n 19200 -d driver=rtlsdr -r 2000000.0 -w 2000000.0 -p 0 -g 18.0 -k 25 -F rtl_power_fftw --even --fft-window boxcar --remove-dc I get this output. Traceback (most recent call last): File "/usr/local/bin/soapy_power", line 5, in <module> from soapypower.main import main File "/usr/local/lib/python3.12/dist-packages/soapypower/main.py", line 5, in <module> import simplesoapy File "/usr/local/lib/python3.12/dist-packages/simplesoapy.py",...
-
Hi Cemaxecuter. I installed a fresh version last night. This morning using GQRX for testing I first plugged in my old Terratec, which worked. Then I plugged in the Airspy mini, it too works. Plugged in the V4 Blog. It showed up in the drop down list as "RTLSDRBlog Blog V4 SN:00000001. Selected it, and was good to go. So yes, I can confirm it's good to go out of the box. I guess I borked it when I followed the website install instructions. Which now are no longer needed. Cheers.
-
Hi Scott. I'm looking all over for my V4, may have to order another to confirm. The drive in Noble I thought was from source, but it may be the release that was part of Noble. The v4 should've worked out of box. It's highly likely the install process described on the website removed key pieces I had taken care of and replaced, also there was a point where the drive moved back soversion, shown here https://github.com/osmocom/rtl-sdr/commit/7ebcb041f2ce887ef4d1a64607558889a86ff169 So what probably...
-
Hi Scott. I'm looking all over for my V2, may have to order another to confirm. The drive in Noble I thought was from source, but it may be the release that was part of Noble. The v4 should've worked out of box. It's highly likely the install process described on the website removed key pieces I had taken care of and replaced, also there was a point where the drive moved back soversion, shown here https://github.com/osmocom/rtl-sdr/commit/7ebcb041f2ce887ef4d1a64607558889a86ff169 So what probably...
-
Hi, Having issues getting my Rtl-Sdr V4 Blog going. Was wondering which rtl-sdr drivers come pre-installed with DragonOS 24.04 Noble. I know there is a modified Osmocom driver with enhancements for RTL-SDR Blog V3 and V4 units. Is that driver the one that comes already installed? I assumed that it didn't so I used the install directions from their website as I have before but it seems to break things. The pre-install process seems heavy handed in it's use of purge and rm. Cheers.
-
-
-
-
-
Tried a fork that had all the most recent PRs from people but ultimately ran into an issue with QT, tried modifying and had no luck yet. I’m willing to bet if you used a python virtual environment, say 3.11 or earlier, and within it pulled in q spectrum it may work? Sent from Proton Mail for iOS On Wed, Jul 2, 2025 at 7:27 PM, Scott Martin <sapperton@users.sourceforge.net> wrote: Cemaxecuter, No worries, glad you're willing to give it another look. If it's not possible I guess I will have to roll...
-
Cemaxecuter, No worries, glad you're willing to give it another look. If it's not possible I guess I will have to roll up my sleeves and see if I can pipe the output to PyQtGraph or some other plotter. Cheers.
-
Scott, I’ll give it a try again and see if there’s been any updates but I seem to recall having an issue with it building on 24.04. Give me a couple days, I’m trying to get a new ISO uploaded anyways with HydraSDR support. Sent from Proton Mail for iOS On Wed, Jul 2, 2025 at 2:11 PM, Scott Martin <sapperton@users.sourceforge.net> wrote: I am looking at the install list for DragonOS_Noble_R4 and see that QspectrumAnalyzer will not be installed. Is Qspectrumanalyzer being dropped, or are there plans...
-
I am looking at the install list for DragonOS_Noble_R4 and see that QspectrumAnalyzer will not be installed. Is Qspectrumanalyzer being dropped, or are there plans to eventually make it available again? I use it for quick visual scans before I run a bash script. The script uses soapy_power and sed to format the output to a CSV file that I can bring into Shure and Audio-Technica's wirless workbench. The programs are windows exe but work well in wine. The sed part of the script took me awhile to figure...
-
-
-
-
-
-
-
Davide Rovelli posted a comment on discussion General Discussion
It is a strange behaviour indeed. In windows I have various limesuite.dll files, but they don't show any version info in the properties. I made the first installation with Pothos SDR: Pothos v0.8.0-PothosSDR-2021.07.25-vc16-x64. The device in device manager is identified as "FDTI FT602 USB 3.0 Bridge Device", driver provider FTDI, Date: 27/03/2024, Driver version: 1.3.0.10. Back to DragonOS, also SDRAngel works fine with the LimeSDR Mini. In windows SDRAngel comes with its own limesuite.dll file...
-
Davide, Some background, I attempted to install both NG (which also provided a legacy API) as well as the non NG drivers. Lime people said they can both be installed. A bit confusing if you ask me. So I went and fired up SDR++ on the latest R3 ISO and have a limev2 plugged in. I get one device listed in the drop down and two things I noticed, the antenna setting can only be set to auto (other options are garbled mess) and the sample rate and bandwidth must both be manually set (not auto). I then...
-
Hi & thanks for the nice work! I'm having issues with the LimeSDR Mini key in DragonOS Noble R2 running bare metal on a live persistent USB. SDR++ crash at start. Gqrx lists two devices: The one with "USB 3.0" in the device name (driver=lime in the log below) make the program crash. The one without "USB 3.0" in the device name (driver=limesuiteng in the log below) don't cause crash but does not provide any sample in output. The same happens using limeGUI. In GNURadio: Block "LimeSuiteNG Source" works...
-
-
-
-
-
the "DragonOS_Noble_R2" XScreenSaver works waking up from suspend. thanks!
-
i have not tried that release. i will try that and report back afterwards. thanks
-
jofewi posted a comment on discussion General Discussion
R37.1 is the release based on lubuntu 22.04 with last ISO release date from 2024. Have you tried the current 2025 release? The latest one at the moment is: https://sourceforge.net/projects/dragonos-focal/files/DragonOS_Noble_R2.iso/download Did you have the same problem with the current release?
-
when i suspend my laptop running focalX R37.1, it never locks the session. maybe that is the default behavior? i'd like it to prompt for password upon resuming. simple config fix for this? tried a few "stackoverflow" suggestions but zero mileage there.
-
Jeff, Check the new Qlog release. It contains the fix. Sent from Proton Mail for iOS On Sat, May 10, 2025 at 2:59 PM, Jeff <f0fyf@users.sourceforge.net> wrote: Thanks for the reply. Indeed, the previous release works perfectly. I noticed that on the latest version which is causing problems, the problem comes from managing the rig with a variable rigerror2 which is not referenced anywhere. To be continued. ;) Thank you so much. Jeff [tickets:#72] QLOG crashe Status: open Milestone: 1.0 Created: Sat...
-
Jeff posted a comment on ticket #72
Thanks for the reply. Indeed, the previous release works perfectly. I noticed that on the latest version which is causing problems, the problem comes from managing the rig with a variable rigerror2 which is not referenced anywhere. To be continued. ;) Thank you so much. Jeff
1 >
