Open Source Windows Robotics Software
Sort By:
Robotics Software for Windows
View 34 business solutionsBrowse free open source Robotics software and projects for Windows below. Use the toggles on the left to filter open source Robotics software by OS, license, language, programming language, and project status.
-
Gemini 3 and 200+ AI Models on One PlatformBuild generative AI apps with Vertex AI. Switch between models without switching platforms.
-
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
1
GCBASIC is an open-source BASIC compiler for 8 bit Microchip PIC, Atmel AVR legacy, AVRDx and LGT microcontrollers. See https://ko-fi.com/post/The-Story-of-GCBASIC-Making-Microcontroller-Progr-D1D319SJ72 for story of GCBASIC. This is a continuous release project. The latest release is always available. This will give you the most complete development toolchain to create and program 8-bit PIC, AVR and LGT microcontrollers. We have added new capabilities that make GCBASIC the easiest tool set available - supporting over 1400 microcontrollers with tools to make this fun and simple. Please see the download section for your options. We have two IDEs, we have just the compiler and we have a minimal install - it is your choice. Please see the homepage here: https://gcbasic.com
-
2
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen. -
3
TinyGSM
A small Arduino library for GSM modules, that just works
A small Arduino library for GSM modules that just works. This library is easy to integrate with lots of sketches that use Ethernet or WiFi. PubSubClient (MQTT), Blynk, HTTP Client, and File Download examples are provided. Arduino GSM library uses 15868 bytes (49%) of Flash and 1113 bytes (54%) of RAM in a similar scenario. TinyGSM also pulls data gently from the modem (whenever possible), so it can operate on very little RAM. Now, you have more space for your experiments. TCP (HTTP, MQTT, Blynk, ...) All modules support TCP connections. Most modules support multiple simultaneous connections. TCP and SSL connections can usually be mixed up to the total number of possible connections. Many GSM modems, WiFi, and radio modules can be controlled by sending AT commands over Serial. TinyGSM knows which commands to send, and how to handle AT responses, and wraps that into the standard Arduino Client interface. -
4
ESP8266Audio
Arduino library to play MOD, WAV, FLAC, MIDI, RTTTL, MP3
Arduino library for parsing and decoding MOD, WAV, MP3, FLAC, MIDI, AAC, and RTTL files and playing them on an I2S DAC or even using a software-simulated delta-sigma DAC with dynamic 32x-128x oversampling. ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones. For real-time, autonomous speech synthesis, check out ESP8266SAM, a library that uses this one and a port of an ancient format-based synthesis program to allow your ESP8266 to talk with low memory and no network required. All this code is released under the GPL, and all of it is to be used at your own risk. If you find any bugs, please let me know via the GitHub issue tracker or drop me an email. The MOD and MP3 routines were taken from StellaPlayer and libMAD respectively. The software I2S delta-sigma 32x oversampling DAC was my own creation and sounds quite good if I do say so myself. -
Fully Managed MySQL, PostgreSQL, and SQL ServerCloud SQL handles your database ops end to end, so you can focus on your app.
-
5
Arduino libraries
Arduino libraries and code
This repository contains several Arduino libraries I have written to be used in applications. Most of them include example code on how the libraries can be used. Furthermore, this repository contains a few stand-alone applications. For bugs in the libraries, please fill in an issue in Github as that makes it far easier to track them. If possible provide a minimal code snippet that exposes the bug. Add information about the platform used and version etc. Also, proposals for solutions are welcome. For improvements and changes, please provide a pull request. I will try to follow up on them asap but it can take quite some time. Please try to be generic in your improvements and try to see "over the needs of your own application". -
6
ATTinyCore Universal
Arduino core for ATtiny 1634, 828, x313, x4, x41, x5, x61, x7 and x8
Arduino support for almost every classic tinyAVR device! Supports ATtiny 1634, 2313/4313, 24/44/84, 441/841, 25/45/85, 261/461/861, 87/167, 48/88, 43 and 828. Supports programming vis ISP, Serial (Optiboot - all parts with >4k flash, and all parts with 4k flash for which an 8k version is available) or VUSB (Micronucleus - where appropriate) There are 272 different versions of micronucleus built (and part of the 2.0.0-dev branch now), and optiboot will dwarf that number! 0 of those have been tested. Obviously, we are leaning very heavily on automation of configuration generation for this release. Half of the tinyNeoPixel speeds have had the assembly routines modified in major ways (there's no more stupid menu for the port), but they are untested. Virtual boot relies on rewriting the vector table, such that the RESET vector points to the bootloader. -
7
Arduino MIDI Library
MIDI for Arduino
This library adds MIDI I/O communications to an Arduino board. MIDI over USB, Bluetooth, IP & AppleMIDI (see Transports). Active Sensing support. Compatible with all Arduino boards (and clones with an AVR processor). Simple and fast way to send and receive every kind of MIDI message (including all System messages, SysEx, Clock, etc..). OMNI input reading (read all channels). Software Thru, with message filtering. Callbacks to handle input messages more easily. Last received message is saved until a new one arrives. Overridable template-based settings. Create more than one MIDI interface for mergers/splitters applications. Use any serial port, hardware or software. All USB-related code has been moved into a separate repository Arduino-USB-MIDI, USB MIDI Device support with MIDI USB, still using this library to do all the MIDI heavy-lifting. -
8
MARIE is a robotic development and integration environment focused on software reusability and exploitation of already available APIs and middlewares used in robotics. Its main purpose is to create a rapid-prototyping approach to robotics developments.
-
9
Robotics Library
C++ framework for robot kinematics, dynamics, motion planning, control
The Robotics Library (RL) is a self-contained C++ library for rigid body kinematics and dynamics, motion planning, and control. It covers spatial vector algebra, multibody systems, hardware abstraction, path planning, collision detection, and visualization. -
Go from Code to Production URL in SecondsSkip the Kubernetes configs. Cloud Run handles HTTPS, scaling, and infrastructure automatically. Two million requests free per month.
-
10
Watchy
An open source E-ink smartwatch
Watchy, an open-source E-Ink smartwatch. Watchy is an E-Paper watch with open-source hardware and software. It has a barebones design utilizing the PCB as the watch body, allowing it to be worn as-is, or further customized with different 3D printed cases and watch straps. It is a unique timepiece that is also a wearable development platform, allowing users to create their own experience. Ultra-low-power e-paper 1.54″ display with 200 x 200 resolution and wide viewing angle. Wi-Fi & Bluetooth LE connectivity. 3-axis accelerometer with gesture detection. Real-time clock for accurate timekeeping with calendar and alarm functions. Built-in USB-to-serial adapter for programming on the go. Watchy comes with comprehensive documentation and Arduino code examples that demonstrate every hardware feature. New watch faces and examples are regularly added. -
11
CILib is a framework for developing Computational Intelligence software in swarm intelligence, evolutionary computing, neural networks, artificial immune systems, fuzzy logic and robotics.
-
12
It's an object-oriented library written in C++ for creating arbitrary kind of neural networks. The user can use the classes provided to create neural network with arbitrary topology and mixed type of neurons. It's very easy add custom neurons.
-
13
Moved to https://github.com/rdiankov/openrave An open-source, cross-platform, plugin-based robot planning environment for autonomous robotics. Includes services like collision detection, physics, (inverse) kinematics, sensors, robot controls, python bindings, and a network scripting environment.
-
14
Critterding
Evolving Artificial Life
Critterding is a "Petri dish" universe in 3D that demonstrates evolving artificial life. Critters start out with completely random brains and bodies, but will automatically start evolving into something with much better survival skills. -
15
The Mars Rover Simulator project is based on the evolutionary robotics paradigm where an artificial agent acquires its skills through the process of artificial evolution. This simulator can be useful to evolve neural network controllers for the rover
-
16
pyGerber2Gcode
Python Gerber to G-code converter
pyGerber2Gcode is a Pyhon based simple Gerber to G-code converter. -
17
A scheme (lisp) interpreter written in ARM assembly language (currently: Cortex-M4F,M7, Cortex-A5,A8,A9, Cortex-A53; previously:ARM7TDMI, ARM920T, Cortex-M3) for education, robotics, wearable devices. Tested on Allwinner A64, Amlogic S905, Atmel SAMA5D4, SAME70, SAMV71, NXP LPC4300, RT1050, iMX8M, Samsung S5P6818, ST STM32F4, STM32F7, and TI AM3359, OMAP3530, DM3730, OMAP4430, TM4C1294 chips (previously: NXP LPC-1300,1700,2000, ATMEL AT91SAM7, STM STR711, STR911, STM32, CIRRUS EP9302, LMI LM3S1968, TI OMAP).
-
18
Arduino DRV8833 Motor Controller Library
A library for the control of motors using the TI DRV8833 IC
-
19
Jazzyk - a special-purpose programming language interpreter for development of modular intelligent agents based on a plug-in architecture.
-
20
Raspberry_Quemu_forWindows
This is QEMU virtual machine with Raspbian OS for students KNUCA
Це віртуальна машина QEMU із зібраною операційною системою Raspbian для емуляції Raspberry Pi на Windows 7, 8, 10. Використовується для занять з робототехніки в Київському національному університеті будівництва і архітектури. pi/raspberry -
21
PHPXref is a developers tool, written in Perl, that will cross reference and extract inline documentation from a collection of PHP scripts. It generates simple HTML output suitable for browsing offline.
-
22
This is a open source edited Version of the FTC controller station. the difference between the FTC controller station and the Field Timer is that the Field timer has a Timer attached to it that starts and stops the robot at the correct time
-
23
An implementation of Bruhn et al.'s fast variational optical flow algorithm using the OpenCV image processing library. The code calculates dense flow fields with a user-specified level of precision.
-
24
Calculation of camshafts - allows to define a camshaft profile on the set trajectory which should provide the given mechanism. The trajectory can be set graphically, co-ordinates or function.
-
25
MORP (Module Orientated Robotic Programming) is a framework bringing base implementations in order to easily connect modules such as a NXT or Bioloid Robot. It provides its own scripting languages called 'morp' dedicated to robot programming.
