Open Source Linux Home Automation Software

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me/?s=Goldilocks+Analogue The Goldilocks 1284p story is here. http://feilipu.me/2013/03/08/goldilocks-1284p-arduino-uno-clone/ If this repository is too complicated to get started, a minimum AVR freeRTOS configured using the Watchdog Timer and Heap 3 is also also available. https://github.com/feilipu/miniAVRfreeRTOS For the Arduino platform there is a freeRTOS Library available in the Arduino IDE Library manager. https://github.com/feilipu/Arduino_FreeRTOS_Library

Grasshopper is an open source and free (speech & beer) responsive-design web application to control Bticino MyHome. VALUES: Use any device Since Grasshopper is a browser-based application, you can use a browser on any device to access Grasshopper. Thanks to its responsive-design support, the Grasshopper interface will adapt to the screen-size of your device. Choice of server-platform Grasshopper is a web application that can run from different web servers. The Grasshopper appliance runs on DietPi with Lesp (Nginx+SQLite+PHP). The Grasshopper application has been tested on Lesp and LAMP+SQLite. (Both documented in following chapters). The only requirement is that SQLite is used as a database. You can read more about this in following chapters. Choice of MyHome Gateway Grasshopper can communicate not only through the official Bticino Gateways (eg. MH20x / F452 / F454) but also network-connected touchscreens can be used (eg. 3,5" / 10")

Teo & Tea has been created to permit a large scale of functions with a Velbus installation. It's a domotic managment program that can show statistic, show temp graph, etc. There is a server that can send/receive frames from Velbus bus and receive/send them to an IP network.

New improved iptables tool, based on my earlier project Easy Linux Firewall, but rewritten from scratch using Perl. It's a simple rewrite for now, but i am working on adding some new features like. Some of the improvements will be web administration panel, automatic filtering daemon, TCP listener providing easy to use API so you can integrate it on many servers and centralize them in to one Web interface to control all of them. I am open to new ideas and also any kind of contributors, because I'm working on this alone and it isn't easy, so you are welcome to help.

Sadly, PRTG Network Monitor does not offer sensors for monitoring AVM Fritz!Box SmartHome devices. So here's a Script to build a "ssh advanced sensor" for PRTG to monitor your SmartHome devices. It's based on PHP using the advanced home automation (AHA) interface of a modern Fritz!Box device. Needs a tiny Linux machine with SSH to host it. It should also be easily adoptable to support Nagios & others. Currently tested with: - FRITZ!DECT 301 Heizkörperthermostat - FRITZ!DECT 440 Taster / Sensor - FRITZ!DECT 200 / 210 Steckdose Comments & suggestions are welcome!

Web User Interface to Home Automation Control Center project (https://sourceforge.net/projects/climcontrol/)

Yadoms is an open source project. It aims to publish a simple, powerfull, flexible and multiplatforms domotic solution. Project has moved to github. Here is the link to the active page: https://github.com/Yadoms/yadoms