Open Source Hardware Platforms

This repository contains the source code of the Arduino IDE 2.x, which is currently in the beta stage. The Arduino IDE 2.x is a major rewrite, sharing no code with the IDE 1.x. It is based on the Theia IDE framework and built with Electron. The backend operations such as compilation and uploading are offloaded to an arduino-cli instance running in daemon mode. This new IDE was developed with the goal of preserving the same interface and user experience of the previous major version in order to provide a frictionless upgrade. If you need assistance, see the Help Center and browse the forum. If you think you found a vulnerability or other security-related bug in this project, please read our security policy and report the bug to our Security Team. The builds are generated every day at 03:00 GMT from the main branch and should be considered unstable.

RIDE is a development environment for Robot Framework test cases. Robot Framework is a generic test automation framework for acceptance testing and acceptance test-driven development.

The project's main goal is to create a component, capable of being added to Freesacle's Codewarrior environment with XBee stack, in order for adding a complete implementation of the ADS1115 functionalities to Digi's XBee radios

EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. An interrupt pin is not required. Any Arduino IDE >= 1.0.0 should be fine. EtherCard is available for installation in the Arduino Library Manager. Alternatively, it can be downloaded directly from GitHub.