Open Source MinGW/MSYS2 Hardware Platforms

smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite.

Library to enable user space application programs to communicate with USB devices

myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 309,000+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - https://sourceforge.net/projects/myfp2esp8266-focus-controller/ myFP2N - Nextion touch screen display - https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/ myFP2M - Ready made Controllers https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/ Please look in the Files-Documents folder for more information. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/

libdc1394 is a library that provides a high level programming interface for application developers who wish to control and capture streams from IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specifications (also known as the IIDC or DCAM Specifications). libdc1394 also supports some USB cameras that are IIDC compliant. Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions and direct camera register access. Keywords: ieee1394, IIDC, DCAM, firewire, USB, machine vision, computer vision, video capture, library

Tool for controlling the special features of a "U3 smart drive" USB Flash disk.

Tools for flashing Rockchip devices.

libmylcd is a frame & font rendering library and toolkit designed to provide low level access to 2D hardware via a video framebuffer. Supported devices include SED133x, T6963C, PCD8544, S1D15G10, USBD480, PCF8833, PCF8814, USB13700, S1D15G14.

This utility is used to create/maintain ROM images for flashing to the Ultimate 1MB device. It's main purpose is to customize your U1MB device to your needs.

SmGen is a finite state machine (FSM) generator for Verilog. On the other hand, it is not an FSM entry tool. The input is behavioral Verilog with clock boundaries specifically set by the designer. SmGen unrolls this behavioral code and generates an FSM from it in synthesizable Verilog. Clock boundaries are explicitly provided by the designer so there is good control on the expected timing

Displays battery charge indicator in the system tray. NOTE: 1) Requires Visual C++ 2010 run-time environment installed. You can get it here: http://www.microsoft.com/en-us/download/details.aspx?id=5555 2) 100% charge shown as 99%, because there is two digit positions. 3) Status icon updates every 30 seconds. There is no way to change this interval other than re-compile source code. 4) Tested on Windows XP SP3. Works perfectly. If you have any troubles using this software, please contact me via e-mail immediately.

Free MSP430 Debugger is developed in two steps : a library to provide access to the debugger hardware, and a "gdbproxy" to allow users to debug their software. This project is currently working with OLIMEX MSP430 JTAG ISO & msp430-gdbproxy.

This project is a simple USB-to-GBIB (IEEE488) interface from PC to GPIB-based devices.

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball!

Relacy is a framework for agent-oriented programming in C++. Agents are autonomous objects, they interact fully asynchronously with messages. Relacy provides means for defining user agents and messages, as well as runtime system.