Open Source ChromeOS Hardware Platforms - Page 3

TagCentric is RFID middleware that controls heterogeneous RFID devices and gathers RFID-related data into a user-specified database. It's cost (free!) and simplicity make it ideal for use by small businesses, RFID testing facilities, and universities.

Dioscuri is an x86 computer hardware emulator written in Java. It is designed by the digital preservation community to make sure that documents and programs from the past can still be accessed in the future. Dioscuri is durable and component-based.

Common Hardware Recovery Solutions by Ukrainian-Russian network

Tools around the Scenix 48/52 series microcontrollers

FirmMod will be a binary editor oriented to firmware modification and analisys, that will support data mappings of binary files, read/write of motorola s-record files, raw hex editing, etc. (whislists welcome!)

IRM is a Web-based asset tracking and trouble ticketing system built for IT departments and helpdesks. It keeps detailed information on both hardware and software, including each computer and network device in your organization.

Your own portable PC system built by integrating existing Open Source components. This mobile metasystem utilizes the internet's web hosting resources and is accessed via any web browser enabled appliance from your home, work, school, library, cafes, etc.

This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.

This is a Perl application enabling downloading and configuring the Voltcraft DL-141TH temperature and humidity sensors device. Targeted at Operating Systems supporting libusb. This application exists thanks to reverse engineering.

Open Source port of the X Window System. XFree86 home page is at http://www.xfree86.org. Bugs may be reported here or at http://bugs.xfree86.org. Information about accessing the XFree86 CVS repository can be found at http://www.xfree86.org/cvs/.

The aim of the myPod project is to provide an platform independed application to have fun with an Apple iPod. myPod helps you to manage your music and to synchronize clips and playlists to your iPod.

This project is based on the sourceforge project tn5250j. The intention of this tn5250jEngine project was to capsulate a slim core modul interpreting the Telnet 5250 stream. This core module provides a 5250-ScreenGrid Interface for any GUI application.

A device driver in 'C' for interfacing a uController with a Displaytech 64128A LCD display (or its variants).It was written and tested on a Renesas R8C/25 microcontroller proto-board. It provides control, text and graphics functions as function cal

This is a simulation of an open CPU, called 67-80-85. It tries to implement a simple, efficient CPU. It includes the simulator, an assembler, a sample code for a boot loader (ROM), a microkernel prototype and tests. - "The 3-legged shinning steel horse

AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . A large range of serial boards (as well as usb boards that present as serial devices) are able to be controlled. KMTronic's USB and Serial relay boards are selectable in the configuration menu, other boards can be setup by entering their control commands. Although primarily designed for irrigation you can use AIC to control a large variety of hardware, for example lighting, heating etc It is envisaged that future implementations of AIC will incorporate rules for more complex device control.

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan.

This is a sketch for Arduino that allows for the user to have multiple sketches on their Arduino, and then switch between them. For a video go to (coming soon). Requires Arduino 0022 or later to use get Arduino here: www.arduino.cc

This program works on command line and helps people to upgrade and recover their D-Link's modems. It's stand-alone and doesn't require web-servers or other stuffs.

BTnodeRFID provides a mobile RFID reader for the ISO 15693 RFID standard with a Bluetooth interface based on existing hardware components. Software libraries to access the reader for J2SE, J2ME and Symbian platforms are included.

An API for manipulating EDIF netlists in Java. We use this API to analyze netlists as a part of our FPGA reliability project. We intend to keep the API as general as possible to support other netlist analysis and manipulation activities. This material is based upon work supported by the National Science Foundation under Grant No. 0801876. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.

This Java program calculates the SPBRG value for a given baud rate (Baudrate) and clock frequency. It comes with a graphical interface and a simple value interpretation guide. A Java Webstart file (.jnlp) is provided.

This package is a development package for Java to use BeeBox on Java platforms.

BlowfishVHDL - free fully synthesizable Blowfish encryption algorithm hardware implementation.

A collection of VIs for easier interface with basic CANopen client operations such as SDO download, SDO upload and PDO messages. Helper VIs for arbitrary mapping of dictionary objects to specific PDOs are also implemented. The project includes a quite crude implementation of the DSP 402 profile for handling motor drives in velocity and/or in position mode.

This project defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer-2 (Data Link Layer). The project is now hosted on GitHub: https://github.com/canpie/CANpie