Open Source C++ Hardware Platforms
Sort By:
C++ Hardware Platforms
View 172 business solutionsBrowse free open source C++ Hardware Platforms and projects below. Use the toggles on the left to filter open source C++ Hardware Platforms by OS, license, language, programming language, and project status.
-
Orchestrate Your AI Agents with ZenflowZenflow orchestrates AI agents like a real engineering system. With parallel execution, spec-driven workflows, and deep multi-repo understanding, agents plan, implement, test, and verify end-to-end. Upgrade to AI workflows that work the way your team does.
-
Auth0 for AI Agents now in GAConnect your AI agents to apps and data more securely, give users control over the actions AI agents can perform and the data they can access, and enable human confirmation for critical agent actions.
-
1
S.M.A.R.T. Monitoring Tools
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. -
2
Barrier
Open-source KVM software
Barrier is a software that works just like a KVM (keyboard, video and mouse) switch, which allows you to use a single mouse and keyboard to control several different computers by physically turning a dial on the box to switch the machine you're controlling at any given time. Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system. Barrier was built to be simple and reliable, allowing you to control a different machine by simply using your mouse and keyboard from another. It works on all major operating systems (Linux, Windows, MacOS/OS X), including FreeBSD and OpenBSD. -
3
HP Linux Imaging and Printing
Hewlett-Packard's Linux imaging and printing software
The Hewlett-Packard Linux Imaging and Printing Project provides a unified single and multi-function connectivity solution for Linux. For support and help, please visit https://launchpad.net/hplip -
4
This project was originally designed to provide an open-source replacement for PPJoy. The product, at this point, consists of virtual joystick devices that is seen by the system as a standard joystick but its position-data is written to it by a feeder application. An existing feeder application that takes advantage of this product is SmartPropoPlus. If you are an application writer you can very easily write an application that controls a joystick (e.g. mouse-to-joystick, keyboard-to-joystick). If you are a beginner in device drivers you can take this code and enhance it to support more (or less) axes, buttons or POVs.
-
Total Network Visibility for Network Engineers and IT ManagersThis means every device on your network, and every interface on every device is automatically analyzed for performance, errors, QoS, and configuration.
-
5
I/O performance Analysis Tool
-
6
Simple program that displays information about CUDA-enabled devices. The program is equipped with GPU performance test.
-
7
Snappy Driver Installer is an application for installing/updating drivers on PCs running Microsoft Windows using driverpacks or included folders with drivers. It can be used to install drivers on newly assembled PCs at places where Internet isn't available. Users can also use the software to keep their drivers up to date.
-
8
ESP8266 Arduino Core
ESP8266 core for Arduino
ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things. It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS servers; and it can perform OTA updates. ESP8266 Arduino core works with SD cards, servos, SPI and I2C peripherals. -
9
VoodooHDA is an open source audio driver for devices compliant with the Intel High Definition Audio specification. It is intended as a replacement for AppleHDA on Mac OS X with support for a wide range of audio controllers and codecs.
-
Cloud-based help desk software with ServoDeskWhat if You Could Automate 90% of Your Repetitive Tasks in Under 30 Days? At ServoDesk, we help businesses like yours automate operations with AI, allowing you to cut service times in half and increase productivity by 25% - without hiring more staff.
-
10
Display power off utility. Powers off desktop/notebook display and optionally locks workstation. Can be set as a screensaver. Can be launched as a system tray icon application.
-
11
This is a virtual floppy drive for Windows NT / 2000 / XP / 2003 / Vista / Windows 7 (both 32-bit and 64-bit versions)
-
12
Open Programmer
An USB programmer for PIC, dsPIC, AVR, serial memories
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms -
13
midisport-macos
M-Audio MIDISPORT USB 64-bit MIDI device driver for MacOS v10.14+
This project provides an open source MacOS v10.14-v12.6 (Mojave to Monterey) compatible CoreMIDI 64 bit device driver for M-Audio's MIDISPORT range of USB MIDI interfaces. This driver supports the following devices: MIDISPORT 1x1 MIDISPORT 2x2 MIDISPORT 4x4 MIDISPORT 8x8/S Oxygen 8 Keyboard Other devices which are compatible may also work, although presently, these are the only ones which have been tested. -
14
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in the data directory but UI has its own repository ESP3D-WEBUI. Use GPIO2 to the ground to reset all settings in a hard way, 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently, boot takes 10 sec - giving 8 seconds to connect GPIO2 to GND and do a hard recovery for settings. Complete configuration by web browser (Station or Access point) or by Serial/telnet commands. -
15
Synergy Core
The keyboard and mouse sharing tool
This is the open source core component of Synergy, a keyboard and mouse sharing tool. Control your computers with one mouse and keyboard. Control multiple computers using only one keyboard and mouse. Focus on developing software, designing, gaming and remove time switching between operating systems. Throw away the extra keyboards and spend time where it really matters. Simplify your workspace by combining multiple computers into one. Easily copy and paste between computers with no effort at all. Keep your passwords and sensitive data secure with TLS encryption. Key, mouse and data all sent fast and securely, directly over your local network. Advanced customization settings give you complete control of your setup. The next version is being built from the ground up by combining the latest technologies, Node.js and React, with the rock-solid stability of C++. -
16
BRL-CAD
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools. -
17
System Stability Tester is a multi platform open source clone of SuperPI and comes with a GUI and a CLI. It can be used for CPU and RAM burning, stressing and benchmarking.
-
18
A GPU memory test utility for NVIDIA and AMD GPUs using well established patterns from memtest86/memtest86+ as well as additional stress tests. The tests are designed to find hardware and soft errors. The code is written in CUDA and OpenCL.
-
19
WinLIRC, the Windows port of the Linux Infrared Remote Control package. Control your computer via remote!
-
20
SnapKey
SnapKey: Open Source Alternative to Snap Tap & SOCD
SnapKey is a lightweight, open-source tool that operates from the system tray and is designed to track inputs from the WASD keys, without interfering with any game files. SnapKey's main role is to recognize when these keys are pressed and automatically release any previously engaged commands for them. This guarantees responsive and precise input handling. SnapKey handles the WASD keys by default and lets you rebind them to your liking via the config file. SnapKey: Open Source Alternative to Snap Tap & SOCD Visit SnapKey on GitHub for more information: https://github.com/cafali/SnapKey -
21
QmdevSimConnect
software for Quickmade flight simulation hardware
Quickmade devices unified software for MSFS2020. one software controls all hardware devices. With running memory lower than 10MB. CPU usage is lower than 0.3% https://sourceforge.net/p/qmdevsimconnect/wiki/Home/ Quickmade Products: QGMC710 QMCP737C QCDU B737/A320 QG1K PFD/MFD QFCU QMPE QMOVH-A Quickmade Products' full simulation platform list https://docs.qq.com/sheet/DWERFQnRmVUFZeHBi?tab=urmsrq Latest News of Quickmade Products: https://www.facebook.com/quickmadesimulation -
22
Razer Synapse 4
Customize and control all your Razer devices
Customize and control all your Razer devices from one powerful platform. Whether you’re remapping buttons, creating macros, or fine-tuning performance settings, Synapse provides every tool you need to personalize your gear to your playstyle. -
23
Karabiner-Elements
Powerful utility for keyboard customization
Karabiner-Elements is a powerful key remapper for macOS. -
24
USB Memory Stick Tester is a small application designed to help testing removable storage media (such as USB memory sticks) for defects
-
25
Awdbedit is a BIOS editor for Award BIOSes. It supports unpacking, replacing, and repacking of components within a BIOS image, and allows settings to be changed and tweaks to be applied to the actual BIOS itself.
