Open Source Windows Electronic Design Automation (EDA) Software - Page 2

GNU SPICE GUI provides a GUI front-end for various freely available electronic circuit simulation engines ie. NG-SPICE and GNU-CAP. It's core function is to generate simulation engine instructions based on user input. However, it also offers extra functionality via applications and utilities developed by others. Electronic Design Automation (EDA) tool suites are used to provide schematic capture and editing, and schematic to netlist conversion. Waveform data viewers are used to display simulation results and PDF viewers to display user manuals.

[ENG] Mod FreeCAD-PCB allow you to import PCB boards to FreeCAD. Scope of mod: - support for many different layers, - possible to choose colours, transparency and names for each layer, - mod allows you to import IGES models with colours, - possible to show holes/vias independent. [PL] Moduł FreeCAD-PCB pozwala na importowanie płytek PCB do programu FreeCAD. Możliwości modułu: - wsparcie dla wielu różnych warstw, - wyświetlanie otworów, przelotek niezależnie od siebie, - możliwość wyboru koloru, przeźroczystości oraz nazwy dla poszczególnych warstw, - importowanie modeli zapisanych w formacie IGS wraz z kolorami. ***** Supported software: - Eagle (*.brd) - Razen (*.rzp) - FreePCB (*.fpc) - gEDA (*.pcb) - FidoCadJ (*.fcd) - KiCad (*.kicad_pcb) - IDF v2/v3 Requirements: FreeCAD >= 0.14 Project forum: https://sourceforge.net/p/eaglepcb2freecad/forum/

DLD V 2.0 Released Digital Logic Design is a Software tool for designing and simulating digital circuits. It provides digital parts ranging from simple gates to Arithmetic Logic Unit. You may start your circuit from simple gates and flipflops and keep on converting them into ICs. These ICs, later on, may be incorporated into other circuits to built more complex circuits like CPU. You may even use SOP expressions to generate digital circuits in IC form. You can use this software to design Combinational, Synchronous and Asynchronous Sequential Circuits. The circuit working can be analyzed by using output parts like LEDs, Seven Segment Display as well as CRT and digital Oscilloscope all provided in the software. This Software may be used by professionals, hobbyists and students alike. The teachers may incorporate this software in their courses like Digital Logic and Computer Design, Computer Architecture, Computer Organization and Embedded Systems.

kicad StepUp: a new approach to export kicad board and modules in STEP AP214 (with colors). With kicad StepUp, it is possible to work in kicad EDA with the same component model data available in the STEP AP214 3D format, and obtain a 3D STEP AP214 model of the pcb board and a complete board assembles with electronic modules, to be used for MCAD interchange. The accurate 3D visualization of components on board assembles in kicad 3dviewer, is maintained in the same accuracy and aspect in STEP AP214 format. The kicad StepUp script maintains the usual way to work with kicad, but improves the process to work in a collaborative way with mechanical designers bringing near ECAD and MCAD environments.

QSapecNG is a Qt-based symbolic analysis program for linear analog circuits. In fact, it consists of two indipendently parts: the SapecNG framework engine, and the application gui QSapecNG.

The sigrok project aims at creating a portable, cross-platform, Free/Libre/Open-Source signal analysis software suite that supports various device types, such as logic analyzers, MSOs, oscilloscopes, multimeters, LCR meters, sound level meters, thermometers, anemometers, light meters, dataloggers, function generators, power supplies, GPIB interfaces, and more.

If you ever worked with the MC34063 Switching Controller, you know what a pain it is to calculate all the part values. This tool is an universal tool to help you with this process. You can calculate any standard application, such as step-up, step-down, inverting and step-up-down. PS: I would be happy about any (positive xD) reviews as well as any bugreports, comments or feature requests that you might have!

This project aims to develop an opensource software with an attractive and efficient GUI which allows to design linear electronic circuits and to characterize existing ones.

A package for transient and steady state simulation of organic solar cells.

The ADS It s a process of analysis, permits to extract or to verify the properties of a system analog or digital system.

Tools for FPGA development and IP cores. This project provides tools, cores and documentation to develope FPGA applications. The project focuses on VHDL.

Wcalc is a tool for the analysis and synthesis of electronic components. Some of the models include coupled microstrip lines, single layer air core solenoid inductors, etc. Wcalc can analyze the electrical parameters based on the physical dimensions a

InSystem Serial Programmer Fujitsu MCU F2MC-16LX and FR series.

GEZEL is a cycle-based hardware description language. The GEZEL tools offer stand-alone - and cosimulation, and code-generation into VHDL code. User-defined library-block extensions in C++ allow to add new cosimulation/cosynthesis interfaces.

CTSoft can be used for configuring the following drives: Digitax ST Base Digitax ST Indexer Digitax ST Plus Digitax ST EZMotion FXMP25 Field Controller Mentor MP Unidrive 'Classic' in open-loop, closed-loop vector and servo modes Unidrive SP open-loop, closed-loop vector servo modes and regen mode Commander SK drives Commander GP20 Drive in open-loop, closed-loop vector Unidrive ES open-loop, closed-loop vector and servo modes Unidrive PV CTSoft system requirements: Pentium IV 1000MHz or better recommended Windows 7, Windows Vista, Windows XP or Windows 2000 is required. Internet Explorer V5 or later should also be installed Absolute minimum of 800x600 screen resolution. 1024x768 is recommended as a minimum. Adobe Acrobat 5.05 or later (for parameter help) 256MB RAM Microsoft .NET Framework Version 2.0 Note that you must have administrator rights to install CTSoft If you have a previous copy of CTSoft installed you must uninstall it first.

SVEditor is an Eclipse-based IDE (Integrated Development Environment) for SystemVerilog and Verilog files. It features syntax coloring, content assist, source indent and auto-indent, and structure display.

v21.06.018 Complete implementation of iec 104 protocol standard including File transfer. Make your RTU, protocol converter, Gateway, HMI, Data concentrator compatible with iec 104. *Industry Proved * Worldwide Customers Download Evaluation Kit - IEC 104 Development Bundle In the Development Bundle, We included IEC 104 Server & Client Simulator, Windows & Linux SDK. http://www.freyrscada.com/iec-60870-5-104.php http://www.freyrscada.com/iec-60870-5-104-Server-Simulator.php http://www.freyrscada.com/iec-60870-5-104-Client-Simulator.php http://www.freyrscada.com/iec-60870-5-104-Windows-Software-Development-Kit(SDK).php http://www.freyrscada.com/iec-60870-5-104-Linux-Software-Development-Kit(SDK).php Video Tutorial https://www.youtube.com/playlist?list=PL4tVfIsUhy1bx7TVjtZnqFB6tbZBhOlJP

MMTL, the Multilayer Multiconductor Transmission Line 2-D and 2.5-D electromagnetic modeling tool suite, generates transmission parameters and SPICE models from descriptions of electronics interconnect dimensions and materials properties.

SDBoot is a complete bootloader solution (MCU side and PC side), free, with source code for AVR MCU chip. It features a checksumed protocol for safe programming.

Electronic circuit simulator. Simple environment to run and debug firmware for AVR 8-bit microprocessors. Able to run arduino firmware. Internally this program uses the open source Simavr AVR Processor Simulator (https://github.com/buserror/simavr) and wraps all its functions in a GUI shell. Setups for firmware debugging scenarios can be created dynamically. Able to run 16MHz MCU with decent set of external parts in real time. In particular this can be used for development of CNC firmware in conjuction with its CAM frontend without access to the real hardware. For Linux and Windows systems. Please visit wiki pages (https://sourceforge.net/p/simutron/wiki/Home/) for instructions

"Magic" VLSI layout tool and various incarnations of the Berkeley tools.

Eclipse Verilog editor is a plugin for the Eclipse IDE. It provides Verilog(IEEE-1364) and VHDL language specific code viewer, contents outline, code assist etc. It helps coding and debugging in hardware development based on Verilog or VHDL.

Covered is a Verilog code coverage utility using VCD/LXT/FST dumpfiles (or VPI interface) and the design to generate line, toggle, memory, combinational logic, FSM state/arc and assertion coverage report metrics viewable via GUI or ASCII format. This project is ported to github and can be found at: https://github.com/chiphackers/covered

View Gerber Files and Drill Files. View IPC-2581.

MyHDL is a Python package for using Python as a hardware description and verification language.