Open Source BSD Battery Monitoring Software

Apcupsd is a program for monitoring UPSes and performing a graceful computer shutdown in the event of a power failure. It runs on Linux, Mac OS/X, Win32, BSD, Solaris, and other OSes.

sispmctl is an application enabling the use of the GEMBIRD SiS-PM and mSiS(sispm) USB-controlled power-outlet device under Linux. Note that the device is also sold under different Names, i.e. as "IntelliPlug" in Germany.

O nome do projeto no sourceforge.net era apcupsd-brazil e mudou para apcctrl. Caso seu nobreak não seja da APC Brasil (como os modelos importados) utilize o projeto http://www.apcupsd.org/ Esse projeto não é oficial da APC Brasil. É uma solução independente e de código aberto. Não deixe de ler a wiki do projeto. É fundamental para compilar e ter acesso a outras orientações. Modelos suportados: 1) BACK-UPS BR 1200VA (BZ1200BI-BR e BZ1200-BR) *modelos com USB 2) BACK-UPS BR 1500VA (BZ1500PBI-BR e BZ1500BI-BR) 3) BACK-UPS BR 2200VA (BZ2200BI-BR e BZ2200I-BR) 4) SMART-UPS BR 1000VA (SUA1000BI-BR e SOLIS1000BI) 5) SMART-UPS BR 1500VA (SUA1500BI-BR e SOLIS1500BI) 6) SMART-UPS BR 2000VA (SUA2000BI-BR) 7) SMART-UPS BR 3000VA (SUA3000BI-BR) Para entrar em contato, utilize lo formulário no site http://www.apcctrl.com.br

gapcmon is a gtk/glib desktop monitor program for the apcupsd package. apcupsd interfaces with UPS power systems on local or networked systems. gapcmon connects to apcupsd via the NIS api to collect and displays the current operational state of the U

A simple yet powerful Power Daemon (powerd) to monitor an Uninteruptable Power Supply (UPS) with the additional capabilities of notifying remote hosts that may not have a way of knowing if their power is off.

apcupsdJcfg is written as a front-end companion to the program apcupsd. It is a gui front-end used to easily create the apcupsd.conf config file so the users do not have to manually edit the file with a text editor.

DPM explores technologies to improve power management, with a focus on techniques applicable to running systems, adjusting power parameters on-the-fly in order to save power during brief idle periods or execution of tasks with lower power demands.

powerkit is an lightweight desktop independent full featured power manager, originally created for Slackware (but will work on any Linux/FreeBSD distro) for use with alternative desktop environments and window managers, like Fluxbox, Blackbox, FVWM, WindowMaker, Openbox, Lumina and others.

Conext Battery Backup UPS power daemon. cpowerd monitors power status of the Conext UPS. It can detect a power failure and shutdown the system safely or cancel shutdown when power is restored. Low battery alarm is not implemented yet.

A UPS monitor daemon for the CyberPower 320 SL UPS which allows you to specify any serial port to watch or any shutdown script you would like to occur. It is very compact and easily used.

Simple CGI viewer for CyberPower UPS PowerPanel commands on *NIX. Written in perl; uses POSIX, CGI, CGI::Carp. Single cgi file in download, to be used in conjunction with CyberPower's powerpanel utility.

The goal of EnerWare is to design and create language primitives and/or extensions that enable the support and provision for energy awareness in resource-constrained systems such as embedded sensors and large-scale servers.

Simple UPS monitoring plugin for GKrellM. Uses NUT (Network UPS Tools) for UPS connection. Based on "GKrellM Belkin UPS Plugin".

gpmudmon is a battery monitor for Linux PPC similar to Batmon but running as a Gnome applet. It displays the current charge of the battery and whether your Powerbook is connected to the power supply or not. It also has an optional gauge to show the curren

Genpower is a daemon that monitors the state of an uninterrupted power supply device (UPS) through an RS232 serial interface, and takes action according to the state of the UPS. A variety of device and cables are supported.

A laptop battery meter for the KDE panel. KBatt can display current power status (AC online, offline), battery level, as well as remaining time.

MyApm is a simple applet displayed in the KDE-Kicker panel showing battery time remaining of an APM supported-laptop. Settings like energylevels, warnsnd and -msg are configable. It uses the remaining min of /proc/apm instead of the "%" like other apmds

This is a small program that reads and writes the WakeUp time in the BIOS. This is done via /dev/nvram on recent kernels (>2.4.6, including 2.6.x) or, alternatively, via direct ISA access. On this WakeUp time the computer is powered on automatically.

Colection of tools to monitor and manage a Socomec/Sicon Ofys UPS connected to the computer through a serial cable. At the moment, only a command line utility has been written.

An opensource replacement for the Commander Pro software available for download from http://www.ups-software-download.com This works with the no-name UPS available from Dick Smith in Australia, and probably others that use this software As of 12-12-2008,

Power acpid is an acpi (Advanced Configuration and Power Interface) daemon designed to be more functional and improve on the design of the current acpid. Power acpid is very loosely based on work from acpid.sourceforge.net.

Allow you to monitor a MGE Pulsar UPSes to allow a clean shutdown in case of power outage. Monitor also the quality of the power line. As of yet, only tested on Linux with Pulsar ES8+ and ESV8+

SICM - Simple Infrastructure Capacity Monitor. Written in Perl for Win32 & Linux. SICM monitors, graphs and alerts the capacity of devices using snmp, ping & custom modules. Runs 24*7, recording results for later reference via a menu-driven web browser.

Enables the possibility of suspending a machine to disk under Linux. It does not need either APM or ACPI support. Software suspend creates an image which is saved in swap partition(s) or a regular file. At the next boot, the kernel detects the saved imag

UPSD Log Parser (ulp) monitors the messages sent by upsd to syslogd. It extracts the data from these and inserts them into an RRD file, from where administrators can get graphs of the UPS status.