Search Results for "usb led fan"
Sort By:
Showing 43 open source projects for "usb led fan"
View related business solutions-
Gemini 3 and 200+ AI Models on One PlatformBuild generative AI apps with Vertex AI. Switch between models without switching platforms.
-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
1
AlienFX Tools
Alienware systems lights, fans, and power control tools and apps
AlienFX Tools is a suite of utilities aimed at controlling lighting, fan, and power behaviors on Alienware systems, directly interfacing with USB or ACPI hardware rather than relying on official drivers. This project supports a broad range of effects and modes, allowing users to customize RGB lighting zones, create and switch profiles based on system states (like power source or running applications), and generate lighting behaviors tied to thermal and performance events. ... -
2
node-hid
Access USB & Bluetooth HID devices through Node.js
node-hid supports Node.js v6 and upwards. For versions before that, you will need to build from source. The platforms, architectures and node versions node-hid supports are the following. In general we try to provide pre-built native library binaries for the most common platforms, Node and Electron versions. We strive to make node-hid cross-platform so there's a good chance any combination not listed here will compile and work. We are using prebuild to compile and post binaries of the... -
3
-
4
Alt-F
free alternative firmware for the DLink DNS-320/320L/321/323/325/327L
Alt-F provides a free and open source alternative firmware for the DLINK DNS-320/320L/321/323/325/327L and DNR-322L. Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS, BTRFS; RAID 0, 1, 5 (with external USB disk) and JBOD; supports up to 8TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure it. Besides the built-in software, Alt-F also supports additional packages on disk, including ffp and Entware packages, that you can install, update and uninstall using the administering web pages Alt-F is being developed and tested on a DNS-323-rev-A1/B1, a DNS325-rev-A1, a DNS-320L-rev-A1 and on a DNS-327L-rev-A1 hardware boards. ... -
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
5
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older... -
6
LCD Smartie displays information on your LCD/VFD. It supports LCDs with a Hitachi HD44780 Controller via parallel port & Matrix Orbital and Crystalfontz serial/USB LCD/VFDs. Info includes: CPU temps, fan speed, the BBC World News, Stocks indexes etc.
-
7
RS485MODBUS V3.O
Software utility for STM8S103, R421A08, R221A04, R413D08 relay board
RS485MODBUS V3.O The STM8S103, R421A08, R221A04 and R413D08 are relay boards that are controlled from your computer, through the USB port. They allow you to control any 12 volt appliance such as led lights for example. You can install an additional 120/220 volt relay that is 12 volt activated. The relay boards can also process input signals such as switches and sensors. Contains MS Visual studio C++ source code. Windows 7/8 compatible. FX1N Series programmable logic controller Activate relays, read sensors via TTL R4AVA07 7 Channel RS485 analog voltage sampler - Read 7 voltages vis RS485 PZEM-016 power sensor - Read mains voltage and current consumption vis RS485 Pelco-d PTZ control - Control pan tilt zoom via RS485 Huawei E3372 modem - Send sms via USB virtual serial port STM32 series WT Servo 16 - 16 channels servo motor control - Control servos via TTL timpearson5000@gmail.com -
8
Xone
Linux kernel driver for Xbox One and Xbox Series X|S accessories
xone is a Linux kernel driver for Xbox One and Xbox Series X|S accessories. It serves as a modern replacement for Xpad, aiming to be compatible with Microsoft's Game Input Protocol (GIP). Installing Xone will disable the Xpad kernel driver. If you are still using Xbox or Xbox 360 peripherals, you will have to install xpad-noone as a replacement for Xpad. -
9
Free Weighbridge Software
Imagic Solution Easy to Use Windows Based Weighbridge Software
Imagic Solution Provide Easy to Use Windows Based Weighbridge Software, its Support Win10/Win11/Win7, 32 and 64 Bit both OS. Facility to Create Multi User with Various Authorisation, it will Provide Secure Weighment with Various Facility Like CCTV Image Capture, RFID Reader Integration, Boom Barrier Integration, Traffic Light, PA Sound System, LED display etc... This Software Provide a secure and Fraud-Free-Operation of All Kind Of Weighbridge, its Design to Suitable for all Kind of... -
Stop Storing Third-Party Tokens in Your DatabaseRolling your own OAuth token storage can be a security liability. Token Vault securely stores access and refresh tokens from federated providers and handles exchange and renewal automatically. Connected accounts, refresh exchange, and privileged worker flows included.
-
10
myDCFocuser Arduino Relative DC Focuser
Arduino Nano DC Motor Controller
An Arduino based controller for a DC motor focuser solution. Replaces RigelSys/JMI DC Controllers. Windows application and ASCOM driver available. Works with most DC motor solutions (eg RigelSys, JMI, Orion, Skywatcher etc). Feature rich and low cost. Build the controller for under $25. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given... -
11
MiniMon
Read and Log CO2, Temperature, and Humidity from a CO2 Monitor Device
...MiniMon can now also be used as a device under GeigerLog: https://sourceforge.net/projects/geigerlog/ CO2 Monitor is a small, low-cost (~65€) device, which is advertised as a 'bad-air' monitor for home and office, which it indicates by green, yellow, and red LEDs, and a small numeric LCD display. MiniMon is a simple Python3 program, which can read the data from this device via a USB connection, show them on the computer screen, and log them to disk, including a timestamp. MiniMon in its current form runs on Linux, using the default HIDRAW driver, but can be adapted to other operating systems, where such a driver is available. Example output in a normal office setting: CO2: 501 ppm, T: 26.29 °C CO2: 502 ppm, T: 26.29 °C After exhaling towards the device, you may find this output, while the display on the device itself (limited to 3000ppm) only shows 'Hi' with the red LED on: CO2: 9723 ppm, T: 26.85 °C CO2: 7824 ppm, T: 26.85 -
12
STM32 machine language monitor
Machine language monitor program for the STM32F103C8T6 "Blue Pill"
Allows a few rudimentary commands to be entered on the STM32 Minimum System Development Board Module ARM STM32F103C8T6 available from various online outlets. The code was originally forged in C but limitations in that approach led me to ARM assembler, and fortunately GNU compiler collection helped in that transition. Small assembler code experiments can be typed into the module's read write memory, displayed and executed. One strange, annoying feature is that the code running in the STM32 can't execute any subroutines in the flash memory. This project requires a serial terminal e.g. on Linux, minicom on a USB serial TTL adapter running at 9600 baud, 8bits, no parity. ... -
13
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &... -
14
C-GM Counter
Connected GM Counter device (IoT) for radioactivity measure
The C-GM Counter is a low cost (<50$) DIY Hardware & Firmware for building a Connected Geiger-Müller counter device to record beta-gamma radiation levels. The counter is the hardware part of the overall A-GM project aimed for providing a long-term continuous measurement of the radioactivity level. see also A-GM Manager at https://www.instructables.com/id/DIY-Radioactivity-Counter-IoT-and-Eco-system/ ** IMPORTANT ** : From v1.4, Arduino Nano require Optiboot bootloader to work, other... -
15
rims-arduino-library
Recirculation infusion mash system library for Arduino
This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is... -
16
brother_ql
Python package for raster language protocol of the Brother QL series
...Print raster instruction files with your Brother label printer via different backends pyusb (works cross-platform) network (works cross-platform for WiFi/Ethernet-enabled printers) linux_kernel (works on Linux only; uses the /dev/usb/lp0 device handles) If your printer has an 'Editor Lite' mode, you need to disable it if you want to print via USB. Make sure that the corresponding LED is not lit by holding the button down until it turns off. The special feature of this package is that no printer driver is required for it to work. -
17
I2Cpytools
Python scripts to handle I2C sensors from your PC and graphing
...Download at https://sourceforge.net/projects/geigerlog/ ! ---------- I2Cpytools is software for the use of I2C sensors at a PC. It uses Python3 scripts. The connection of the sensors to the PC is done via USB-dongles. Three different ones are supported, which can be used simultaneously: * ELV USB-I2C, ELV Elektronik AG https://www.elv.de/ * IO-Warrior24 Dongle IOW24-DG), Code Mercenaries https://www.codemercs.com/de * USB-ISS, Devantech https://www.robot-electronics.co.uk/htm/usb_iss_tech.htm The supported sensors (for either dongle) are: * BME280 (Temperature, Pressure, Humidity) * LM75(B) (Temperature) * TSL2591 (Light, visible + infrared) * HT16K33 (LED matrix 8x8 red LEDs) I2Cpytools runs as data logger. ... -
18
DZS3000NV Viasat zapper STB
a small form factor and cost-effective satellite HD set-top box
The DZS3000NV is a small form factor and cost-effective satellite HD set-top box based on the BCM7358 processor. It supports one satellite tuner/LNB, two USB ports, a HDMI port, an Ethernet port, IR communication and a single front-panel LED and a standby button. -
19
BashBunny Payloads
The Official Bash Bunny Payload Repository
This repository is a curated collection of payload scripts and examples for the Hak5 Bash Bunny device, a programmable USB attack platform. Payloads demonstrate how the device can emulate human interface devices (keyboard/mouse), Ethernet adapters, serial gadgets, or mass storage to automate complex workflows once plugged into a host. The collection ranges from benign administrative automation to offensive security demonstrations used in penetration testing, showcasing patterns like... -
20
DigiOiler
Very cheap chain oiler based on the Digispark
The goal was a very cheap, programmable and easy to recreate chain oiler. The heart is a Kickstarter Digispark, a small Arduino development board, for less than 3$ including shipping charge from China. Due to the integrated USB connector it can be easily programmed by the Arduino IDE. Additionally there is not much necessary, only a small circiut, a LED, a button and a box for approximately 12$ (list of parts as PDF under Files in the board archive). -
21
Antec Kuhler H20-1250
Linux Driver for Antec Kuhler 1250
This is a driver for the Antec series of Watercoolers, specifically the 1250 , 950, and 650. Other compatible coolers which use the Antec GRID protocol will probably also work. For Older Kuhlers that use the ASETEK Protcol, please see the H20-920 page. -
22
webLED
Remote access to your DIY usb decive.
The webLED is an example for v-usb and libusb to control a ATtiny LED via a Webpage. -
23
AVR32 Ecos
Ecos for AVR32 targets
...To compile ecos source codes Atmel tool chain for AVR32 devices is needed and can be downloaded from Atmel web site. Ecos-3.0 – ecos + AVR32UC3C port source files. Hellow_Examples – example project in Atmel studio 6.2 with, ADC test, LED and push buttons test, internal FLASH test, external SPI Atmel Data FLASH test, AST wallclock test and USB tests for AT32UC3C-EK board. This project contains all necessary ecos headers and library to be compiled and linked in Atmel studio. -
24
Anti-theft alarm sysem based on Arduino
This system works under 5V DC power supply, it can realize infrared en
...products_id=3517 2.1×USB Cable A-B Male to Female USB A to UAB B 3m for Arduino 3.1×1K ohm 1/4W 1% Accuracy Metal Film Resistor 4.1×5mm Infrared Emitting LED 5. 1×5mm Infrared Receiving LED 6. 1×Active Buzzer Module for Arduino 7.1×5mm DIP Round White Red Superbright Bulb Light LED 8. 1×5V power supply 9.1× 830 Point Solderless PCB Bread Board MB-102 Test DIY -
25
Okapi Viewer
Java app used for monitoring Okapi Solar Furnace fan control systems
The Okapi Viewer app is intended for use by owners of Okapi solar air heater fan control systems. It is used to monitor data (inlet, outlet, ambient temperatures and fan speeds) broadcast by the Okapi systems that use the optional Bluetooth transceiver module. The app can also be connected to "hacked" Okapi systems by wiring a PL2303 USB adapter (or similar) to the "hacked" Okapi.
