Search Results for "circuit board"
Sort By:
Showing 40 open source projects for "circuit board"
View related business solutions-
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
Add Two Lines of Code. Get Full APM.Works out of the box for Rails, Django, Express, Phoenix, and more. Monitoring exceptions and performance in no time.
-
1
MicroPython
Python implementation for microcontrollers and constrained systems
MicroPython is a lean and efficient implementation of the Python 3 programming language that includes a small subset of the Python standard library and is optimised to run on microcontrollers and in constrained environments. The MicroPython pyboard is a compact electronic circuit board that runs MicroPython on the bare metal, giving you a low-level Python operating system that can be used to control all kinds of electronic projects. MicroPython is packed full of advanced features such as an interactive prompt, arbitrary precision integers, closures, list comprehension, generators, exception handling and more. ... -
2
PCB Elegance
Printed circuit board design tools for Windows.
-
3
NSLadder
Ladder editor and debugger
NSLadder is a complete PLC manager based on the Ladder diagram, it generates code that can be directly assimilated by the PLC controller (arduino, raspberry, arm cpu....) NSLadder also allows simulation without a PLC connected Ladder is one of the best visual programming languages is a PLC programming language called ladder diagram (LD) or instructions list (IL). The main strength of lader is the visual representation that is more representative than most programming languages, so... -
4
Elliptical_Controller
Hardware and software controls for a self powered elliptical machine.
Hardware and software control of a self powered elliptical machine using an Arduino Nano. Tkinter is used both as a GUI and as a multithreading environment. Programming model is an industrial network with autonomous workcells communicating with each other. Each workcell is instantiated anonymously, maintains its own state and is completely private. Message passing between workcells is done over a virtual network. All control loops are single bit with 16 bit resolution without using analog... -
Gemini 3 and 200+ AI Models on One PlatformBuild generative AI apps with Vertex AI. Switch between models without switching platforms.
-
5
PCB is a tool for the layout of printed circuit boards. PCB can produce industry standard RS-274X and Excellon NC-Drill format output for submission to board manufacturers.
-
6
BuddyCAD
A set of freeware applications for viewing/processing P-CAD files.
BuddyCAD Viewer+ can view/process files for following P-CAD versions: - P-CAD v4.5 - P-CAD v8.5 / v8.7 / v9.0 - P-CAD 99 / Accel / 2002 / 2004 / 2006 (through ASCII import) -
7
Low Cost BMS
Battery Management System for electric vehicles
This is an open source BMS for your home-made electric vehicle, home storage battery or any other battery project! It includes files to help you build and program your own circuit boards. You will need to get the circuit boards made, buy the components and solder them to the boards, then program the chips on the boards. There is one master board and multiple module boards. The master has a screen to let you know what is going on. It also has a LED as a warning light in case a fault occurs (low cell voltage for example). ... -
8
myNetPCB
Community driven PCB Layout and Schematic capture software
PCB Layout and Schematic capture tool for Win/Linux/Mac. Source code at https://github.com/sergei-iliev/myNetPCB -
9
Coco III - Kenwood TS-440s Txfr
Interfacing a Tandy Color Computer 3 to a Kenwood TS440s amateur radio
BASIC and 6809 machine language programs to send and receive data at 4800 baud for the Kenwood TS-440s HF transceiver fitted with the Kenwood IC-10 integrated circuit kit through the Kenwood IF-232c TTL to RS-232c interface. The MC6809 machine language is used to bit banger the serial receive and transmit data from and to the Kenwood TS-440s transceiver. The machine language also checks for key board entry on the Coco III, so that receive data and the keys can be polled simultaneously. The BASIC code tries to display the information to the screen, and continue handling commands. ... -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
10
ESP32 Arduino Reflow Oven Controller
ESP32 Arduino Based Reflow Oven Controller Schematics and Firmware
This reflow oven controller was built to control a modified toaster oven for the purpose of doing reflow soldering of printed circuit boards. The controller was designed and built around an ESP32-DevKitC development board with ancillary electronics added to complete the controller. The schematic can be found in <files/hardware>. The code for the controller was modified extensively from existing Arduino sketches for reflow oven controllers and is PID-algorithm based. ... -
11
ESP32 Arduino Reflow Oven Controller
ESP32 Arduino Based Reflow Oven Controller Schematics and Firmware
This reflow oven controller was built to control a modified toaster oven for the purpose of doing reflow soldering of printed circuit boards. The controller was designed and built around an ESP32-DevKitC development board with ancillary electronics added to complete the controller. The schematic can be found in <files/hardware>. The code for the controller was modified extensively from existing Arduino sketches for reflow oven controllers and is PID-algorithm based. ... -
12
AquarioPi
Automate the schedule of multiple remote controlled aquarium lights
AquarioPi is an IR controller that will change the light settings around the clock on multiple lights, and multiple brands of infrared (IR) remote controlled lights. All that's required is a Raspberry Pi, a resistor, an IR LED, and a breadboard or other type of circuit board or connection to the LED and resistor. Visit the AquarioPi Wiki for more information. -
13
FreeRouter Portable
PCB auto router in PortableApps.com format
Java Based Printed Circuit Board Routing Software from FreeRouting.net written by Alfons Wirtz. This software can be used together with all host PCB design software systems containing a standard Specctra or Electra DSN interface. It imports .dsn-files generated by the Specctra interface of the host system and exports Specctra session files.(There exists also an interface to Cadsoft-Eagle.) -
14
MSX Disk Interface Emulator
A Interface to adapt modern SD Card to the old MSX computers
This is an open source project that aims to create a MSX cartridge that acts as a old disk drive interface but in fact it will be accesing a modern SD Card. For the MSX it will be as if there is a magnetic disk drive with a real magnetic disk but for real it will be accessing a .dsk file inside a sdcard. Development tools used are: - Kicad version 2013-07-07 - Microchip XC8 v1.21 (free mode) - Micrchip MPLAB X IDE v1.90 - Altera´s Quartus Web Edition 11.0 UPDATE... -
15
dxf2pcb
Convert DXF drawings of circuit boards to gEDA-PCB files.
This Python script reads in a DXF (ascii) file and generates a PCB output compatible with PCB Designer, part of the gEDA suite. It is designed for two purposes: One is to generate a PCB snippet from a mechanical drawing (such as a board outline), the other is to produce element files from CAD drawings. PCB snippets are easily imported into an existing gEDA-PCB project using File -> Load Layout to Buffer. Generated element files are ready to use (except for special cases like no-paste... -
16
Electronic Weather Station System
Two companion weather stations with Wi-Fi upload/download
...The design files include the Fritzing CAD files, the etchable PDF PCB layout files, the Gerber files, parts listings, software listings (embedded software listings and Website scripts), and schematics of the circuit boards. There are two circuit boards which are the main controller board and the Timer/Regulator board. The Main controller board performs all the processing of the system. The timer/regulator board converts the 12vdc input voltage to the 3.3v and 5v DC voltages used by the main controller board. The timer/regulator board communicates with the main board via a serial communication cable. ... -
17
Fußboden-/Heizungssteuerung (2015)
Fußboden Heizungssteuerung unter Linux mit GUI
Heizungssteuerung für Fußbodenheizung auf dem Raspberry PI unter Linux mit Touchscreenbedienung und 1-Wire Sensoren. Nachfolger unter https://gitlab.com/notdefine/heating-control -
18
Wired Security System
Wired two-station security system
...The circuit board layouts are single-sided to enable a hobbyist to etch her/his own boards. A listing of the top-layer jumper wires is included. -
19
PCIToGCode
Create G Code from a Picture of the PCI.
PCIToGCode is a software developed to convert an image of a printed circuit board (PCB) in to a G code file. Using the G code file, you can mill a PCB using a CNC milling machine. This software was developed to help and to speed up the manufacturing process of a PCB prototype. Using this software, you will be able to build your so expected project, extracted both from a magazine or from the Internet, which needs a PCB to be produced, without any complicated CAD software. ... -
20
PCBColorizer
Automatic coloring PCB - make a color circuit board for installation.
...The program also generates a text list of components, where the marks, what type of components is associated with which character on the circuit board. -
21
Spider PCB
Hierarchical Schematic and PCB
This project is in a pre-alpha stage and is intended to give a rough idea about the final program. It does not do much more than draw pretty pictures. Hierarchical circuit layout is commonplace amongst IC designers, but Spider PCB brings hierarchical layout to the PCB industry. Not only is the schematic hierarchical, but also the layout. Ever wanted to lay out a 16-band equaliser, with 5 sound channels? Lots of copying and pasting on the PCB-side. Just imagine if you could lay out one... -
22
avr-libethernet
Ethernet stack implementation (currently based on the ENC28J60)
A callback handler based ethernet stack implementation optimized for AVR microcontrollers. For now, the only controller supported is the ENC28J60. However it is easy to integrate different controllers as the interface your driver has to provide is fairly simple. Developed by the hobbyist programmers and electrical engineering students Niklas Fritz and Alexander Gladis -
23
zum erstellen von Layouts für Lochrasterplatine create simple Layouts for circuit boards in grid style
-
24
A methodology to create netlists for printed circuit board layout using a novel PCB specific HDL as the source language.
-
25
Visualization of PCB (printed circuit board) descriptions in Gerber RS-274X format. The intention is to let a PCB designer take an RS-274X formatted file and generate a 3D concept view, either locally, or generated as PNG/clip, or browsable X3D/VRML.
