Search Results for "canon camera"

The free TCamRemote Canon Delphi and ActiveX component can be used to interface and remotely handle Canon PowerShot and EOS digital cameras. Note that the new PowerShot G7X MkII is supported for remote operations. TCamRemote is based on the Canon SDKs, which is administrated from Canon. Link to Canon development community. Highlights take pictures remotely and receive the picture to the computer, handle the remote viewfinder set and get remote parameters (e.g. ...

...It works with : DOS/Windows FAT12, FAT16 and FAT32NTFS ( Windows NT/2K/XP )Linux Ext2 and Ext3BeFS ( BeOS )BSD disklabel ( FreeBSD/OpenBSD/NetBSD )CramFS (Compressed File System)HFS and HFS+, Hierarchical File SystemJFS, IBM's Journaled File SystemLinux RaidLinux Swap (versions 1 and 2)LVM and LVM2, Linux Logical Volume ManagerNetware NSSReiserFS 3.5, 3.6 and 4Sun Solaris i386 disklabelUFS and UFS2 (Sun/BSD/...)XFS, SGI's Journaled File System PhotoRec is file data recovery software designed to recover lost pictures from digital camera memory or even Hard Disks. It has been extended to search also for non audio/video headers. It searches for Sun/NeXT audio data (.au)RIFF audio/video (.avi/.wav)BMP bitmap (.bmp)bzip2 compressed data (.bz2)Source code written in C (.c)Canon Raw picture (.crw)Canon catalog (.ctg)FAT subdirectoryMicrosoft Office Document (.doc)Nikon ds

This software writes short movies with your digital DSLR camera Canon (R) directly to computer. The camera must have LiveView feature to work, like in Canon EOS 450D for example. The Program has preview, Av, Tv and WB control.

...But it does not support this features: Editing the owner/artist/copyright and synchronizing date/time within the local PC's date/time. For that, I wrote a new utility that includes all these features by integrating those that were missing. I uses an official Canon SDK (Canon ED-SDK) to retrieve and set all camera information (shutter count is retrieved via an undocumented function). The Canon Digital Camera SDKs is freely available on this official link: https://www.didp.canon-europa.com. for more info read the text file "readme.txt" please.

UAVphoto is a simple tool that allows to calculate parameters like ground pixel size, motion blur and sequential image overlap from UAV flight parameters (velocity and altitude) and camera parameters (focal length etc.). Calculation assumes vertical camera view.Image x dimensions are those in flight direction, image y dimensions are those perpendicular to flight direction. Default camera values are for Canon G12 at the wide angle limit. Five to six seconds is the approximate minimum image interval using a CHDK (http://chdk.wikia.com) interval script. ...

SpecimenPhoto controls a Canon Powershot camera for specimen archival photography. Each photograph is assigned a case number, labeled and stored. Identification is manual or "hands free" using separately available barcode and speech recognition modules.

iAstroHub is: - the world's first solution for mobile astrophotography. A user can interact with all astrophotography devices from any mobile device using a web browser. - developed by Anat Ruangrassamee, Ph.D., Bangkok Thailand. (aruangra at yahoo dot com) See how it works from here: http://www.youtube.com/watch?v=Sncd3j8ipBQ Requirements and supported devices. 1. Autoguider: Orion Starshoot autoguider, QHY5, QHY5-II, QHY5L-II, QHY6 2. DSLR 3. CCD: QHY5,6,8,8L,9,11,12 4....

iAstroDroid is a world first solution for controlling the autoguider, CCD, DSLR, and mount for astrophotography on Android devices. iAstroDroid run on a parallel OS (Chroot) on an Android device. A user can control all devices via a web browser on Android. Requirements and supported devices. 1. Autoguider: QHY5 or QHY6 2. CCD: QHY8L 3. DSLR: Canon or Nikon DSLR 4. USB serial adapter (FTDI232) for controlling a DSLR camera shutter and a serial shutter cable http://www.beskeen.com/projects/dslr_serial/dslr_serial.shtml 5. USB serial adapter (FTDI232) for controlling a mount via a serial port 6. Power USB hub: I have used Belkin Ultra Slim Hub (4 ports and 7 ports) 7. Android device (rooted, with usb host, and with kernel supporting usb charging and FTDI driver).

Local or remote control a canon PTZ camera by an USB joystick. Attach the RS232 PTZ camera to your computer and control the camera by a USB joystick. This software is also designed to allow owner to remotely control the camera via TCP/IP running the software in the local and many remote computers. NOTE: this is designed for NU700 camera, I don't actually know if the protocol is a standard for Canon.

Program for extracting embedded audio data from JPEG images (written in Python). Useful if you have digital camera which can record audio notes and embed them in photos (e.g. HP, Kodak, Canon, Fujifilm, etc.)

This is an open-hardware one-button time-lapse camera timer initially developed for a Canon 400D Digital SLR camera. It can be used to take photographs at intervals from 1 second to 65535 seconds (approximately 18 hours). Uses a PIC microcontroller.

This program turns an ordinary TI-86 calculator into a shutter release trigger for some Canon (and possibly many other) cameras using nothing more than a data-link cable. Future versions will include self-timer, interval, and long exposure modes.

This is aimed at providing a simple to use GUI for gphoto2 to be used on a netbook, such as the ASUS Eee PC with their smaller screens they wont run propriety tools as supplied by companies such as Canon. It is currently in its early stages.

With CuteCanonCapture you can connect to your Canon PowerShot via USB-Cable and completely remote control it. Preview your next shot in a video/web cam like screen and directly transfer taken images onto your computer.

This python module allows to control a Canon Digital Camera from within python applications.

Automated Optical Inspection for loaded PCB's using a webcam or, under linux, a Canon digital camera capable of remote capture based on OpenCV. Can be compiled for Linux or Windows. This project is dead, as haar training proved not to be a good approach. Anyway, there is a replacement which works, at https://bitbucket.org/guenterneust/examinator/wiki/Home based on dlib.

`capture` is a remote capture software currently designed around the Canon PowerShot digital cameras. It can be used interactively from the command-line, wrapped into a script or a GUI.

GNU Canon digital camera utilities for image manipulation in Canon digital cameras (EOS 350D, 20D, 1D, etc.)

Canon EOS class remote control utility for 300D, 350D, 30D, 20D and 5D. It is possible to control more of Canon cameras in the same time up to six cameras attached. Multican allows scripted remote control of multiple cameras.

s10sh is a command line software utility to download pictures from Canon digital cameras via a USB or serial cable. It also allows for other direct control of the camera and to explore the embedded processor.

Set of python scripts for joining and conversion of video files from digital cameras (with video time/size limits). "Intelligent" join functionality (according to time). Scripts use Avisynth and VirtualDub. Focus is on Canon PowerShotAxx cameras.

Linux - POSIX compliant open source driver for the Canon Communication VC-C1 camera

Simple and fast photo postprocessing editor with sensitometrically correct 48-bit workflow for both digital and scanned photos. Contrast, exposure, color corrections, cropping, USM. Supports Canon/Nikon/etc digital camera RAW files using dcraw utility.

Control your Canon EOS 300/350/(400/450) over your PC via Parallel Port. With EasyEOS you can take HDR pictures in a short amount of time without touching the camera during the process of taking them.