Search Results for "adsp"

Open source DKIM library, MTA filter implementation and associated tools.

CANopen is the internationally standardized (EN 50325-4) CAN-based higher-layer protocol for embedded control system, and the CANopenNode is simple and reliable open source software stack used industrial and home automation for serial communication of multiple devices over the CAN/CANopen Network. This support package from Analog Devices, Inc. enables interfacing the required CAN drivers and code to perform CANopen slave operation on Analog Devices Inc ADSP-CM408 mixed signal controller (http://www.analog.com/en/processors-dsp/cm4xx/adsp-cm408f/products/cm40x-ez/eb.html) with the open source CANopen_3_10 code (https://sourceforge.net/projects/canopennode/). Please note that the opensource CANopenNode source and the ADSP-CM40x Enablement Software package are available for direct download from the above links, and this support package will enable users to quickly bring-up a CANopenNode device on the target hardware platform using the supplied code and documentation.

ADopenPOWERLINK is an open source Ethernet Powerlink Controlled Node (Slave) solution using the Analog Devices ADSP-CM408F mixed signal processor (http://www.analog.com), along with Altera FPGA as network communication processor. The solution is based on openPOWERLINK provided by SYSTEC electronic (http://www.systec-electronic.com), B&R (http://www.br-automation.com) and Kalycito (http://www.kalycito.com). This release contains the necessary and required packages and documentation to setup the power-link controlled node using Analog Devices ADZS-CM408 EZLITE development board (http://www.analog.com/en/processors-dsp/cm4xx/adsp-cm408f/products/cm40x-ez/eb.html) as application processor, and a Terasic DE2-115 Altera FPGA development board as a communication processor.

The ezLINX iCoupler Isolated Interface Development environment provides developers with a cost-effective, plug and play solution for evaluating eight physical Layer, digitally-isolated communication standards(USB, RS-422, RS-485, RS-232, CAN, SPI, I2C and LVDS). The Blackfin ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is significantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards.The Interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler and isoPower® digital isolator technology.

The ezLINX™ iCoupler® Isolated Interface Development Environment provides developers with a cost-effective, plug and play method for evaluation eight physical layer, digitally-isolated communication standards (USB, RS-422, RS-485, RS-232, CAN, SPI, I2C, and LVDS). The Blackfin® ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is signifcantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards. The interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler® and isoPower® digital isolator technology.

libdkim++ is a lightweight and portable DKIM (RFC4871) library for *NIX, supporting both signing and SDID/ADSP verification sponsored by Halon Security. libdkim++ has extensive unit test coverage and aims to fully comply with the current RFC.

ADSP is an open source application for security management of a web application, based on user - role - permission interaction. The application was built using JSF, JBoss Seam, RichFaces, EJB 3, JBoss Envers and can be deployed on the JBoss AS.

sim2181 is an opcode-level simulator of the core functions of the Analog Devices ADSP-2181 digital signal processor. Not all functions are implemented yet, but it is a good start. It can currently pe